|
LibTiePie
0.4.5
Library for interfacing TiePie engineering instruments
|
|
LibTiePie
0.4.5
Library for interfacing TiePie engineering instruments
|
Header for libtiepie. More...
#include "stdint.h"Go to the source code of this file.
Macros | |
| #define | LIBTIEPIE_VERSION_MAJOR 0 |
| #define | LIBTIEPIE_VERSION_MINOR 4 |
| #define | LIBTIEPIE_VERSION_RELEASE 5 |
| #define | LIBTIEPIE_REVISION 5524 |
| #define | ARN_COUNT 3 |
| Number of auto resolution modes. More... | |
| #define | ARB_DISABLED 0 |
| #define | ARB_NATIVEONLY 1 |
| #define | ARB_ALL 2 |
| #define | AR_UNKNOWN 0 |
| Unknown/invalid mode. More... | |
| #define | AR_DISABLED ( 1 << ARB_DISABLED ) |
| Resolution does not automatically change. More... | |
| #define | AR_NATIVEONLY ( 1 << ARB_NATIVEONLY ) |
| Highest possible native resolution for the current sample frequency is used. More... | |
| #define | AR_ALL ( 1 << ARB_ALL ) |
| Highest possible native or enhanced resolution for the current sample frequency is used. More... | |
| #define | ARM_NONE 0 |
| #define | ARM_ALL ( ( 1 << ARN_COUNT ) - 1 ) |
| #define | ARM_ENABLED ( ARM_ALL & ~AR_DISABLED ) |
| #define | BMN_COUNT 3 |
| Number of generator burst modes. More... | |
| #define | BMB_DISABLED 0 |
| #define | BMB_COUNT 1 |
| #define | BMB_GATED_PERIODS 2 |
| #define | BM_UNKNOWN 0 |
| #define | BM_DISABLED ( 1 << BMB_DISABLED ) |
| #define | BM_COUNT ( 1 << BMB_COUNT ) |
| #define | BM_GATED_PERIODS ( 1 << BMB_GATED_PERIODS ) |
| #define | BMM_NONE 0x0000000000000000ULL |
| #define | BMM_ALL ( ( 1ULL << BMN_COUNT ) - 1 ) |
| #define | CKN_COUNT 5 |
| Number of couplings. More... | |
| #define | CKB_DCV 0 |
| Volt DC. More... | |
| #define | CKB_ACV 1 |
| Volt AC. More... | |
| #define | CKB_DCA 2 |
| Ampere DC. More... | |
| #define | CKB_ACA 3 |
| Ampere AC. More... | |
| #define | CKB_OHM 4 |
| Ohm. More... | |
| #define | CK_UNKNOWN 0 |
| Unknown/invalid coupling. More... | |
| #define | CK_DCV ( 1 << CKB_DCV ) |
| Volt DC. More... | |
| #define | CK_ACV ( 1 << CKB_ACV ) |
| Volt AC. More... | |
| #define | CK_DCA ( 1 << CKB_DCA ) |
| Ampere DC. More... | |
| #define | CK_ACA ( 1 << CKB_ACA ) |
| Ampere AC. More... | |
| #define | CK_OHM ( 1 << CKB_OHM ) |
| Ohm. More... | |
| #define | CKM_NONE 0 |
| #define | CKM_V ( CK_DCV | CK_ACV ) |
| Volt. More... | |
| #define | CKM_A ( CK_DCA | CK_ACA ) |
| Ampere. More... | |
| #define | CKM_OHM ( CK_OHM ) |
| Ohm. More... | |
| #define | CKM_ASYMMETRICRANGE ( CKM_OHM ) |
| 0 to +Range More... | |
| #define | CKM_SYMMETRICRANGE ( CKM_V | CKM_A ) |
| -Range to +Range More... | |
| #define | CON_COUNT 2 |
| Number of clock output types. More... | |
| #define | COB_SAMPLE 0 |
| Sample clock. More... | |
| #define | COB_10MHZ 1 |
| 10 MHz clock More... | |
| #define | CO_NONE 0 |
| No clock output. More... | |
| #define | CO_SAMPLE ( 1 << COB_SAMPLE ) |
| Sample clock. More... | |
| #define | CO_10MHZ ( 1 << COB_10MHZ ) |
| 10 MHz clock More... | |
| #define | CSN_COUNT 2 |
| Number of clock sources. More... | |
| #define | CSB_EXTERNAL 0 |
| External clock. More... | |
| #define | CSB_INTERNAL 1 |
| Internal clock. More... | |
| #define | CS_EXTERNAL ( 1 << CSB_EXTERNAL ) |
| External clock. More... | |
| #define | CS_INTERNAL ( 1 << CSB_INTERNAL ) |
| Internal clock. More... | |
| #define | FMN_COUNT 2 |
| Number of frequency modes. More... | |
| #define | FMB_SIGNALFREQUENCY 0 |
| #define | FMB_SAMPLEFREQUENCY 1 |
| #define | FM_UNKNOWN 0x00000000 |
| #define | FM_SIGNALFREQUENCY ( 1 << FMB_SIGNALFREQUENCY ) |
| #define | FM_SAMPLEFREQUENCY ( 1 << FMB_SAMPLEFREQUENCY ) |
| #define | FMM_NONE 0x00000000 |
| #define | FMM_ALL ( ( 1 << FMN_COUNT ) - 1 ) |
| #define | MMN_COUNT 2 |
| Number of measure modes. More... | |
| #define | MMB_STREAM 0 |
| Stream mode bit number. More... | |
| #define | MMB_BLOCK 1 |
| Block mode bit number. More... | |
| #define | MMM_NONE 0 |
| #define | MMM_ALL ( ( 1 << MMN_COUNT ) - 1 ) |
| #define | MM_UNKNOWN 0 |
| Unknown/invalid mode. More... | |
| #define | MM_STREAM ( 1 << MMB_STREAM ) |
| Stream mode. More... | |
| #define | MM_BLOCK ( 1 << MMB_BLOCK ) |
| Block mode. More... | |
| #define | STN_COUNT 6 |
| Number of signal types. More... | |
| #define | STB_SINE 0 |
| #define | STB_TRIANGLE 1 |
| #define | STB_SQUARE 2 |
| #define | STB_DC 3 |
| #define | STB_NOISE 4 |
| #define | STB_ARBITRARY 5 |
| #define | ST_UNKNOWN 0 |
| #define | ST_SINE ( 1 << STB_SINE ) |
| #define | ST_TRIANGLE ( 1 << STB_TRIANGLE ) |
| #define | ST_SQUARE ( 1 << STB_SQUARE ) |
| #define | ST_DC ( 1 << STB_DC ) |
| #define | ST_NOISE ( 1 << STB_NOISE ) |
| #define | ST_ARBITRARY ( 1 << STB_ARBITRARY ) |
| #define | STM_AMPLITUDE ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_NOISE | ST_ARBITRARY ) |
| #define | STM_OFFSET ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_DC | ST_NOISE | ST_ARBITRARY ) |
| #define | STM_FREQUENCY ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_NOISE | ST_ARBITRARY ) |
| #define | STM_PHASE ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_ARBITRARY ) |
| #define | STM_SYMMETRY ( ST_SINE | ST_TRIANGLE | ST_SQUARE ) |
| #define | STM_DATALENGTH ( ST_ARBITRARY ) |
| #define | STM_DATA ( ST_ARBITRARY ) |
| #define | TCN_COUNT 2 |
| Number of trigger conditions. More... | |
| #define | TCB_GREATER 0 |
| #define | TCB_LESS 1 |
| #define | TC_UNKNOWN 0 |
| #define | TC_GREATER ( 1 << TCB_GREATER ) |
| #define | TC_LESS ( 1 << TCB_LESS ) |
| #define | TCM_NONE 0 |
| No conditions. More... | |
| #define | TCM_ALL ( ( 1 << TCN_COUNT ) - 1 ) |
| All conditions. More... | |
| #define | TH_ALLPRESAMPLES 0xffffffffffffffffULL |
| Trigger hold off to all presamples valid More... | |
| #define | TRIGGER_IO_ID(pgid, sgid, fid) ( ( DN_MAIN << TIOID_SHIFT_DN ) | ( ( pgid ) << TIOID_SHIFT_PGID ) | ( ( sgid ) << TIOID_SHIFT_SGID ) | ( ( fid ) << TIOID_SHIFT_FID ) ) |
| #define | COMBI_TRIGGER_IO_ID(dn, tiid) ( ( ( dn ) << TIOID_SHIFT_DN ) | ( ( tiid ) & ( ( 1 << TIOID_SHIFT_DN ) - 1 ) ) ) |
| #define | DN_MAIN 0 |
| The device itself. More... | |
| #define | DN_SUB_FIRST 1 |
| First sub device in a combined device. More... | |
| #define | DN_SUB_SECOND 2 |
| Second sub device in a combined device. More... | |
| #define | PGID_OSCILLOSCOPE 1 |
| Oscilloscope. More... | |
| #define | PGID_GENERATOR 2 |
| Generator. More... | |
| #define | PGID_EXTERNAL_DSUB 3 |
| External D-sub. More... | |
| #define | SGID_MAIN 0 |
| The oscilloscope or function generator itself. More... | |
| #define | SGID_CHANNEL1 1 |
| #define | SGID_CHANNEL2 2 |
| #define | SGID_PIN1 1 |
| #define | SGID_PIN2 2 |
| #define | SGID_PIN3 3 |
| #define | FID_SCP_TRIGGERED 0 |
| #define | FID_GEN_START 0 |
| #define | FID_GEN_STOP 1 |
| #define | FID_GEN_NEW_PERIOD 2 |
| #define | FID_EXT_TRIGGERED 0 |
| #define | TIOID_SHIFT_PGID 20 |
| #define | TIOID_SHIFT_DN 24 |
| #define | TIOID_SHIFT_SGID 8 |
| #define | TIOID_SHIFT_FID 0 |
| #define | TIID_INVALID 0 |
| #define | TIID_EXT1 TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN1 , FID_EXT_TRIGGERED ) |
| #define | TIID_EXT2 TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN2 , FID_EXT_TRIGGERED ) |
| #define | TIID_EXT3 TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN3 , FID_EXT_TRIGGERED ) |
| #define | TIID_GENERATOR_START TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_START ) |
| #define | TIID_GENERATOR_STOP TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_STOP ) |
| #define | TIID_GENERATOR_NEW_PERIOD TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_NEW_PERIOD ) |
| #define | TOID_INVALID 0 |
| #define | TOID_EXT1 TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN1 , FID_EXT_TRIGGERED ) |
| #define | TOID_EXT2 TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN2 , FID_EXT_TRIGGERED ) |
| #define | TOID_EXT3 TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN3 , FID_EXT_TRIGGERED ) |
| #define | TKN_COUNT 9 |
| Number of trigger kinds. More... | |
| #define | TKB_RISINGEDGE 0 |
| #define | TKB_FALLINGEDGE 1 |
| #define | TKB_INWINDOW 2 |
| #define | TKB_OUTWINDOW 3 |
| #define | TKB_ANYEDGE 4 |
| #define | TKB_ENTERWINDOW 5 |
| #define | TKB_EXITWINDOW 6 |
| #define | TKB_PULSEWIDTHPOSITIVE 7 |
| #define | TKB_PULSEWIDTHNEGATIVE 8 |
| #define | TK_UNKNOWN 0 |
| Unknown/invalid trigger kind. More... | |
| #define | TK_RISINGEDGE ( 1ULL << TKB_RISINGEDGE ) |
| Rising edge. More... | |
| #define | TK_FALLINGEDGE ( 1ULL << TKB_FALLINGEDGE ) |
| Falling edge. More... | |
| #define | TK_INWINDOW ( 1ULL << TKB_INWINDOW ) |
| Inside window. More... | |
| #define | TK_OUTWINDOW ( 1ULL << TKB_OUTWINDOW ) |
| Outside window. More... | |
| #define | TK_ANYEDGE ( 1ULL << TKB_ANYEDGE ) |
| Any edge. More... | |
| #define | TK_ENTERWINDOW ( 1ULL << TKB_ENTERWINDOW ) |
| Enter window. More... | |
| #define | TK_EXITWINDOW ( 1ULL << TKB_EXITWINDOW ) |
| Exit window. More... | |
| #define | TK_PULSEWIDTHPOSITIVE ( 1ULL << TKB_PULSEWIDTHPOSITIVE ) |
| Positive pulse width. More... | |
| #define | TK_PULSEWIDTHNEGATIVE ( 1ULL << TKB_PULSEWIDTHNEGATIVE ) |
| Negative pulse width. More... | |
| #define | TKM_NONE 0 |
| No trigger kinds. More... | |
| #define | TKM_EDGE ( TK_RISINGEDGE | TK_FALLINGEDGE | TK_ANYEDGE ) |
| All edge triggers. More... | |
| #define | TKM_WINDOW ( TK_INWINDOW | TK_OUTWINDOW | TK_ENTERWINDOW | TK_EXITWINDOW ) |
| All window triggers. More... | |
| #define | TKM_PULSEWIDTH ( TK_PULSEWIDTHPOSITIVE | TK_PULSEWIDTHNEGATIVE ) |
| All pulse width triggers. More... | |
| #define | TKM_ALL ( ( 1ULL << TKN_COUNT ) - 1 ) |
| All trigger kinds. More... | |
| #define | TO_INFINITY -1 |
| No time out. More... | |
| #define | TOEN_COUNT 3 |
| Number of trigger output events. More... | |
| #define | TOEB_GENERATOR_START 0 |
| #define | TOEB_GENERATOR_STOP 1 |
| #define | TOEB_GENERATOR_NEWPERIOD 2 |
| #define | TOE_UNKNOWN 0 |
| #define | TOE_GENERATOR_START ( 1 << TOEB_GENERATOR_START ) |
| #define | TOE_GENERATOR_STOP ( 1 << TOEB_GENERATOR_STOP ) |
| #define | TOE_GENERATOR_NEWPERIOD ( 1 << TOEB_GENERATOR_NEWPERIOD ) |
| #define | TOEM_NONE 0 |
| No trigger output events. More... | |
| #define | TOEM_GENERATOR ( TOE_GENERATOR_START | TOE_GENERATOR_STOP | TOE_GENERATOR_NEWPERIOD ) |
| All generator trigger output events. More... | |
| #define | TOEM_ALL ( ( 1ULL << TOEN_COUNT ) - 1 ) |
| All trigger output events. More... | |
| #define | TSN_CHANNEL_COUNT 32 |
| Number of LSBs reserved for channel trigger sources. More... | |
| #define | TS_NONE 0x0000000000000000ULL |
| No trigger source. More... | |
| #define | TS_CH1 0x0000000000000001ULL |
| Channel 1. More... | |
| #define | TS_CH2 0x0000000000000002ULL |
| Channel 2. More... | |
| #define | TS_CH3 0x0000000000000004ULL |
| Channel 3. More... | |
| #define | TS_CH4 0x0000000000000008ULL |
| Channel 4. More... | |
| #define | TS_CH5 0x0000000000000010ULL |
| Channel 5. More... | |
| #define | TS_CH6 0x0000000000000020ULL |
| Channel 6. More... | |
| #define | TS_CH7 0x0000000000000040ULL |
| Channel 7. More... | |
| #define | TS_CH8 0x0000000000000080ULL |
| Channel 8. More... | |
| #define | TS_CH9 0x0000000000000100ULL |
| Channel 9. More... | |
| #define | TS_CH10 0x0000000000000200ULL |
| Channel 10. More... | |
| #define | TS_CH11 0x0000000000000400ULL |
| Channel 11. More... | |
| #define | TS_CH12 0x0000000000000800ULL |
| Channel 12. More... | |
| #define | TS_CH13 0x0000000000001000ULL |
| Channel 13. More... | |
| #define | TS_CH14 0x0000000000002000ULL |
| Channel 14. More... | |
| #define | TS_CH15 0x0000000000004000ULL |
| Channel 15. More... | |
| #define | TS_CH16 0x0000000000008000ULL |
| Channel 16. More... | |
| #define | TS_CH17 0x0000000000010000ULL |
| Channel 17. More... | |
| #define | TS_CH18 0x0000000000020000ULL |
| Channel 18. More... | |
| #define | TS_CH19 0x0000000000040000ULL |
| Channel 19. More... | |
| #define | TS_CH20 0x0000000000080000ULL |
| Channel 20. More... | |
| #define | TS_CH21 0x0000000000100000ULL |
| Channel 21. More... | |
| #define | TS_CH22 0x0000000000200000ULL |
| Channel 22. More... | |
| #define | TS_CH23 0x0000000000400000ULL |
| Channel 23. More... | |
| #define | TS_CH24 0x0000000000800000ULL |
| Channel 24. More... | |
| #define | TS_CH25 0x0000000001000000ULL |
| Channel 25. More... | |
| #define | TS_CH26 0x0000000002000000ULL |
| Channel 26. More... | |
| #define | TS_CH27 0x0000000004000000ULL |
| Channel 27. More... | |
| #define | TS_CH28 0x0000000008000000ULL |
| Channel 28. More... | |
| #define | TS_CH29 0x0000000010000000ULL |
| Channel 29. More... | |
| #define | TS_CH30 0x0000000020000000ULL |
| Channel 30. More... | |
| #define | TS_CH31 0x0000000040000000ULL |
| Channel 31. More... | |
| #define | TS_CH32 0x0000000080000000ULL |
| Channel 32. More... | |
| #define | TS_GENSTOP 0x0400000000000000ULL |
| Generator stop. More... | |
| #define | TS_GENNEW 0x0800000000000000ULL |
| Generator new period. More... | |
| #define | TS_GENSTART 0x1000000000000000ULL |
| Generator start. More... | |
| #define | TS_EXT2 0x2000000000000000ULL |
| External 2 (TTL) More... | |
| #define | TS_EXTANALOG 0x4000000000000000ULL |
| External (Analog) More... | |
| #define | TS_EXT 0x8000000000000000ULL |
| External (TTL) More... | |
| #define | TSM_NONE 0x0000000000000000ULL |
| No trigger sources. More... | |
| #define | TSM_ALL 0xFFFFFFFFFFFFFFFFULL |
| All trigger sources. More... | |
| #define | TSM_CHANNELS ( ( 1ULL << TSN_CHANNEL_COUNT ) - 1 ) |
| All channel trigger sources. More... | |
| #define | TSM_NONCHANNELS ( TSM_ALL - TSM_CHANNELS ) |
| All non-channel trigger sources. More... | |
| #define | TSM_GENALL ( TS_GENSTART | TS_GENNEW | TS_GENSTOP ) |
| All generator trigger sources. More... | |
| #define | PID_NONE 0 |
| Unknown/invalid ID. More... | |
| #define | PID_COMBI 2 |
| Combined instrument. More... | |
| #define | PID_HS4 15 |
| Handyscope HS4. More... | |
| #define | PID_HS4D 20 |
| Handyscope HS4-DIFF. More... | |
| #define | PID_HS5 22 |
| Handyscope HS5. More... | |
| #define | TPDEVICEHANDLE_INVALID 0 |
| #define | DEVICETYPE_OSCILLOSCOPE 0x00000001 |
| Oscilloscope. More... | |
| #define | DEVICETYPE_GENERATOR 0x00000002 |
| Generator. More... | |
| #define | DEVICETYPE_I2CHOST 0x00000004 |
| I2C Host. More... | |
| #define | DEVICETYPE_COUNT 3 |
| Number of device types. More... | |
| #define | IDKIND_DEVICEID 0x00000001 |
| dwId parameter is a device id. More... | |
| #define | IDKIND_INDEX 0x00000002 |
| dwId parameter is an index. More... | |
| #define | IDKIND_SERIALNUMBER 0x00000004 |
| dwId parameter is a serial number. More... | |
| #define | IDKIND_COUNT 3 |
| Number of id kinds. More... | |
| #define | LIBTIEPIESTATUS_SUCCESS 0 |
| The function executed successfully. More... | |
| #define | LIBTIEPIESTATUS_VALUE_CLIPPED 1 |
| One of the parameters of the last called function was outside the valid range and clipped to the closest limit. More... | |
| #define | LIBTIEPIESTATUS_VALUE_MODIFIED 2 |
| One of the parameters of the last called function was within the valid range but not available. The closest valid value is set. More... | |
| #define | LIBTIEPIESTATUS_UNSUCCESSFUL -1 |
| An error occurred during execution of the last called function. More... | |
| #define | LIBTIEPIESTATUS_NOT_SUPPORTED -2 |
| The requested functionality is not supported by the hardware. More... | |
| #define | LIBTIEPIESTATUS_INVALID_HANDLE -3 |
| The handle to the device is invalid. More... | |
| #define | LIBTIEPIESTATUS_INVALID_VALUE -4 |
| The requested value is not valid. More... | |
| #define | LIBTIEPIESTATUS_INVALID_CHANNEL -5 |
| The requested channel number is not valid. More... | |
| #define | LIBTIEPIESTATUS_INVALID_TRIGGER_SOURCE -6 |
| The requested trigger source is not valid. More... | |
| #define | LIBTIEPIESTATUS_INVALID_DEVICE_TYPE -7 |
| The device type is invalid. More... | |
| #define | LIBTIEPIESTATUS_INVALID_DEVICE_INDEX -8 |
| The device index is invalid, must be < LstGetCount(). More... | |
| #define | LIBTIEPIESTATUS_INVALID_DEVICE_ID -9 |
| There is no device with the requested device ID. More... | |
| #define | LIBTIEPIESTATUS_INVALID_DEVICE_SERIALNUMBER -10 |
| There is no device with the requested serial number. More... | |
| #define | LIBTIEPIESTATUS_DEVICE_GONE -11 |
| The device indicated by the device handle is no longer available. More... | |
| #define | LIBTIEPIESTATUS_INTERNAL_ADDRESS -12 |
| The requested I2C address is an internally used address in the device. More... | |
| #define | LIBTIEPIESTATUS_NOT_CONTROLLABLE -13 |
| The generator is currently not controllable, see GenIsControllable. More... | |
| #define | LIBTIEPIESTATUS_BIT_ERROR -14 |
| The requested I2C operation generated a bit error. More... | |
| #define | LIBTIEPIESTATUS_NO_ACKNOWLEDGE -15 |
| The requested I2C operation generated "No acknowledge". More... | |
| #define | LIBTIEPIESTATUS_INVALID_CONTAINED_DEVICE_SERIALNUMBER -16 |
| A device with the requested serial number is not available in the combined instrument, see LstDevGetContainedSerialNumbers. More... | |
| #define | LIBTIEPIESTATUS_INVALID_INPUT -17 |
| The requested trigger input is not valid. More... | |
| #define | LIBTIEPIESTATUS_INVALID_OUTPUT -18 |
| The requested trigger output is not valid. More... | |
| #define | LIBTIEPIESTATUS_INVALID_DRIVER -19 |
| The currently installed driver is not supported, see LstDevGetRecommendedDriverVersion(). (Windows only) More... | |
| #define | LIBTIEPIESTATUS_NOT_AVAILABLE -20 |
| With the current settings, the requested functionality is not available. More... | |
| #define | LIBTIEPIESTATUS_INVALID_FIRMWARE -21 |
| The currently used firmware is not supported . More... | |
| #define | LIBTIEPIESTATUS_INVALID_INDEX -22 |
| The requested index is not valid. More... | |
| #define | CONNECTORTYPE_UNKNOWN 0x00000000 |
| #define | CONNECTORTYPE_BNC 0x00000001 |
| #define | CONNECTORTYPE_BANANA 0x00000002 |
| #define | CONNECTORTYPE_POWERPLUG 0x00000004 |
| #define | CONNECTORTYPE_COUNT 3 |
| Number of connector types. More... | |
| #define | CONNECTORTYPE_MASK ( CONNECTORTYPE_BNC | CONNECTORTYPE_BANANA | CONNECTORTYPE_POWERPLUG ) |
| #define | DATARAWTYPE_UNKNOWN 0x00000000 |
| #define | DATARAWTYPE_INT8 0x00000001 |
| int8_t More... | |
| #define | DATARAWTYPE_INT16 0x00000002 |
| int16_t More... | |
| #define | DATARAWTYPE_INT32 0x00000004 |
| int32_t More... | |
| #define | DATARAWTYPE_INT64 0x00000008 |
| int64_t More... | |
| #define | DATARAWTYPE_UINT8 0x00000010 |
| uint8_t More... | |
| #define | DATARAWTYPE_UINT16 0x00000020 |
| uint16_t More... | |
| #define | DATARAWTYPE_UINT32 0x00000040 |
| uint32_t More... | |
| #define | DATARAWTYPE_UINT64 0x00000080 |
| uint64_t More... | |
| #define | DATARAWTYPE_FLOAT32 0x00000100 |
| float More... | |
| #define | DATARAWTYPE_FLOAT64 0x00000200 |
| double More... | |
| #define | DATARAWTYPE_COUNT 10 |
| Number of raw data types. More... | |
| #define | DATARAWTYPE_MASK_INT ( DATARAWTYPE_INT8 | DATARAWTYPE_INT16 | DATARAWTYPE_INT32 | DATARAWTYPE_INT64 ) |
| #define | DATARAWTYPE_MASK_UINT ( DATARAWTYPE_UINT8 | DATARAWTYPE_UINT16 | DATARAWTYPE_UINT32 | DATARAWTYPE_UINT64 ) |
| #define | DATARAWTYPE_MASK_FLOAT ( DATARAWTYPE_FLOAT32 | DATARAWTYPE_FLOAT64 ) |
| #define | DATARAWTYPE_MASK_FIXED ( DATARAWTYPE_MASK_INT | DATARAWTYPE_MASK_UINT ) |
| #define | IDM_DEVICEID 0x80000000 |
| #define | IDM_ALL 0xffffffff |
| #define | IDB_HS4 1 |
| #define | IDB_HS4D 2 |
| #define | IDB_HS5 5 |
| #define | IDB_COMBI 8 |
| #define | ID_HS4 ( IDM_DEVICEID | ( 1 << IDB_HS4 ) ) |
| Handyscope HS4. More... | |
| #define | ID_HS4D ( IDM_DEVICEID | ( 1 << IDB_HS4D ) ) |
| Handyscope HS4 DIFF. More... | |
| #define | ID_HS5 ( IDM_DEVICEID | ( 1 << IDB_HS5 ) ) |
| Handyscope HS5. More... | |
| #define | ID_COMBI ( IDM_DEVICEID | ( 1 << IDB_COMBI ) ) |
| Combined instrument. More... | |
| #define | BOOL8_FALSE 0 |
| #define | BOOL8_TRUE 1 |
| #define | LIBTIEPIE_TRISTATE_UNDEFINED 0 |
| Undefined. More... | |
| #define | LIBTIEPIE_TRISTATE_FALSE 1 |
| False. More... | |
| #define | LIBTIEPIE_TRISTATE_TRUE 2 |
| True. More... | |
| #define | LIBTIEPIE_TRIGGERIO_INDEX_INVALID 0xffff |
| #define | LIBTIEPIE_STRING_LENGTH_NULL_TERMINATED 0xffffffff |
| #define | TPVERSION_MAJOR(x) ( x >> 48 ) |
| Extract the major number from a TpVersion_t value. More... | |
| #define | TPVERSION_MINOR(x) ( ( x >> 32 ) & 0xffff ) |
| Extract the minor number from a TpVersion_t value. More... | |
| #define | TPVERSION_RELEASE(x) ( ( x >> 16 ) & 0xffff ) |
| Extract the release number from a TpVersion_t value. More... | |
| #define | TPVERSION_BUILD(x) ( x & 0xffff ) |
| Extract the build number from a TpVersion_t value. More... | |
| #define | TPDATE_YEAR(x) ( x >> 16 ) |
| Extract year from a TpDate_t value. More... | |
| #define | TPDATE_MONTH(x) ( ( x >> 8 ) & 0xff ) |
| Extract month from a TpDate_t value. More... | |
| #define | TPDATE_DAY(x) ( x & 0xff ) |
| Extract day from a TpDate_t value. More... | |
| #define | WM_LIBTIEPIE ( WM_USER + 1337 ) |
| Message number offset used by LibTiePie. More... | |
| #define | WM_LIBTIEPIE_LST_DEVICEADDED ( WM_LIBTIEPIE + 2 ) |
| #define | WM_LIBTIEPIE_LST_DEVICEREMOVED ( WM_LIBTIEPIE + 3 ) |
| #define | WM_LIBTIEPIE_DEV_REMOVED ( WM_LIBTIEPIE + 4 ) |
| #define | WM_LIBTIEPIE_SCP_DATAREADY ( WM_LIBTIEPIE + 0 ) |
| #define | WM_LIBTIEPIE_SCP_DATAOVERFLOW ( WM_LIBTIEPIE + 1 ) |
| #define | WM_LIBTIEPIE_SCP_CONNECTIONTESTCOMPLETED ( WM_LIBTIEPIE + 7 ) |
| #define | WM_LIBTIEPIE_GEN_BURSTCOMPLETED ( WM_LIBTIEPIE + 5 ) |
| #define | WM_LIBTIEPIE_GEN_CONTROLLABLECHANGED ( WM_LIBTIEPIE + 6 ) |
Typedefs | |
| typedef void(* | TpCallback_t )(void *pData) |
| typedef int32_t | LibTiePieStatus_t |
| LibTiePie status code. More... | |
| typedef uint32_t | TpDeviceHandle_t |
| Device handle. More... | |
| typedef uint64_t | TpVersion_t |
| Data type representing a version number. More... | |
| typedef uint32_t | TpDate_t |
| Data type representing a date. More... | |
| typedef uint8_t | bool8_t |
| Boolean value one byte wide. More... | |
| typedef uint8_t | LibTiePieTriState_t |
| TriState value one byte wide. More... | |
| typedef void ** | LibTiePiePointerArray_t |
| Pointer array. More... | |
Functions | |
| TpVersion_t | LibGetVersion (void) |
| Get the library version number. More... | |
| uint32_t | LibGetConfig (uint8_t *pBuffer, uint32_t dwBufferLength) |
| Get the library configuration number. More... | |
| LibTiePieStatus_t | LibGetLastStatus (void) |
| Get the last status value. More... | |
| const char * | LibGetLastStatusStr (void) |
| Get the last status value as text. More... | |
| void | LstUpdate (uint32_t dwDeviceIdMask) |
| Update the device list. More... | |
| uint32_t | LstGetCount (void) |
| Get the number of devices in the device list. More... | |
| TpDeviceHandle_t | LstOpenDevice (uint32_t dwIdKind, uint32_t dwId, uint32_t dwDeviceType) |
| Open a device and get a handle to the device. More... | |
| TpDeviceHandle_t | LstOpenOscilloscope (uint32_t dwIdKind, uint32_t dwId) |
| Open an oscilloscope and get a handle to the oscilloscope. More... | |
| TpDeviceHandle_t | LstOpenGenerator (uint32_t dwIdKind, uint32_t dwId) |
| Open a generator and get a handle to the generator. More... | |
| TpDeviceHandle_t | LstOpenI2CHost (uint32_t dwIdKind, uint32_t dwId) |
| Open an I2C host and get a handle to the I2C host. More... | |
| uint32_t | LstCreateCombinedDevice (TpDeviceHandle_t *pDeviceHandles, uint32_t dwCount) |
| Create a combined instrument. More... | |
| TpDeviceHandle_t | LstCreateAndOpenCombinedDevice (TpDeviceHandle_t *pDeviceHandles, uint32_t dwCount) |
| Create and open a combined instrument. More... | |
| void | LstRemoveDevice (uint32_t dwSerialNumber) |
| Remove an instrument from the device list so it can be used by other applications. More... | |
| bool8_t | LstGetDeviceCanOpen (uint32_t dwIdKind, uint32_t dwId, uint32_t dwDeviceType) |
| Check whether the listed device can be opened. More... | |
| uint32_t | LstGetDeviceProductId (uint32_t dwIdKind, uint32_t dwId) |
| Get the product id of the listed device. More... | |
| uint32_t | LstGetDeviceName (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength) |
| Get the full name of the listed device. More... | |
| uint32_t | LstGetDeviceNameShort (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength) |
| Get the short name of the listed device. More... | |
| uint32_t | LstDevGetNameShortest (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength) |
| Get the short name of the listed device wihout model postfix. More... | |
| TpVersion_t | LstDevGetDriverVersion (uint32_t dwIdKind, uint32_t dwId) |
| Get the version number of the driver currently used by the listed device. More... | |
| TpVersion_t | LstDevGetRecommendedDriverVersion (uint32_t dwIdKind, uint32_t dwId) |
| Get the version number of the recommended driver for the listed device. More... | |
| TpVersion_t | LstDevGetFirmwareVersion (uint32_t dwIdKind, uint32_t dwId) |
| Get the version number of the firmware currently used by the listed device. More... | |
| TpDate_t | LstDevGetCalibrationDate (uint32_t dwIdKind, uint32_t dwId) |
| Get the calibration date of the listed device. More... | |
| uint32_t | LstGetDeviceSerialNumber (uint32_t dwIdKind, uint32_t dwId) |
| Get the serial number of the listed device. More... | |
| uint32_t | LstGetDeviceTypes (uint32_t dwIdKind, uint32_t dwId) |
| Get the device types of the listed device. More... | |
| uint32_t | LstDevGetContainedSerialNumbers (uint32_t dwIdKind, uint32_t dwId, uint32_t *pBuffer, uint32_t dwBufferLength) |
| Get the serial numbers of the individual devices contained in a combined device. More... | |
| uint32_t | LstCbDevGetProductId (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber) |
| Get the product id of a device contained in a combined device. More... | |
| uint32_t | LstCbDevGetName (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength) |
| Get the full name of a device contained in a combined device. More... | |
| uint32_t | LstCbDevGetNameShort (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength) |
| Get the short name of a device contained in a combined device. More... | |
| uint32_t | LstCbDevGetNameShortest (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength) |
| Get the short name without model postfix of a device contained in a combined device. More... | |
| TpVersion_t | LstCbDevGetDriverVersion (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber) |
| Get the driver version of a device contained in a combined device. More... | |
| TpVersion_t | LstCbDevGetFirmwareVersion (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber) |
| Get the firmware version of a device contained in a combined device. More... | |
| TpDate_t | LstCbDevGetCalibrationDate (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber) |
| Get the calibration date of a device contained in a combined device. More... | |
| uint16_t | LstCbScpGetChannelCount (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber) |
| Get the channel count of an oscilloscope contained in a combined oscilloscope. More... | |
| void | LstSetCallbackDeviceAdded (TpCallback_t pCallback, void *pData) |
| Set a callback function which is called when a device is added to the device list. More... | |
| void | LstSetCallbackDeviceRemoved (TpCallback_t pCallback, void *pData) |
| Set a callback function which is called when a device is removed from the device list. More... | |
| void | LstSetEventDeviceAdded (int fdEvent) |
| Set an event file descriptor which is set when a device is added to the device list. More... | |
| void | LstSetEventDeviceRemoved (int fdEvent) |
| Set an event file descriptor which is set when a device is removed from the device list. More... | |
| void | LstSetEventDeviceAdded (HANDLE hEvent) |
| Set an event object handle which is set when a device is added to the device list. More... | |
| void | LstSetEventDeviceRemoved (HANDLE hEvent) |
| Set an event object handle which is set when a device is removed from the device list. More... | |
| void | LstSetMessageDeviceAdded (HWND hWnd) |
| Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEADDED message is sent when a device is added to the device list. More... | |
| void | LstSetMessageDeviceRemoved (HWND hWnd) |
| Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEREMOVED message is sent when a device is removed from the device list. More... | |
| void | DevClose (TpDeviceHandle_t hDevice) |
| Close a device. More... | |
| bool8_t | DevIsRemoved (TpDeviceHandle_t hDevice) |
| Check whether a device is removed. More... | |
| TpVersion_t | DevGetDriverVersion (TpDeviceHandle_t hDevice) |
| Get the version number of the driver used by the device. More... | |
| TpVersion_t | DevGetFirmwareVersion (TpDeviceHandle_t hDevice) |
| Get the version number of the firmware used by the device. More... | |
| TpDate_t | DevGetCalibrationDate (TpDeviceHandle_t hDevice) |
| Get the calibration date of the device. More... | |
| uint32_t | DevGetSerialNumber (TpDeviceHandle_t hDevice) |
| Get the serial number of the device. More... | |
| uint32_t | DevGetProductId (TpDeviceHandle_t hDevice) |
| Get the product id of the device. More... | |
| uint32_t | DevGetType (TpDeviceHandle_t hDevice) |
| Get the device type. More... | |
| uint32_t | DevGetName (TpDeviceHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength) |
| Get the full name of the device. More... | |
| uint32_t | DevGetNameShort (TpDeviceHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength) |
| Get the short name of the device. More... | |
| uint32_t | DevGetNameShortest (TpDeviceHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength) |
| Get the short name of the device without model postfix. More... | |
| void | DevSetCallbackRemoved (TpDeviceHandle_t hDevice, TpCallback_t pCallback, void *pData) |
| Set a callback function which is called when the device is removed. More... | |
| void | DevSetEventRemoved (TpDeviceHandle_t hDevice, int fdEvent) |
| Set an event file descriptor which is set when the device is removed. More... | |
| void | DevSetEventRemoved (TpDeviceHandle_t hDevice, HANDLE hEvent) |
| Set an event object handle which is set when the device is removed. More... | |
| void | DevSetMessageRemoved (TpDeviceHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam) |
| Set a window handle to which a WM_LIBTIEPIE_DEV_REMOVED message is sent when the device is removed. More... | |
| uint16_t | DevTrGetInputCount (TpDeviceHandle_t hDevice) |
| Get the number of trigger inputs. More... | |
| uint16_t | DevTrGetInputIndexById (TpDeviceHandle_t hDevice, uint32_t dwId) |
| Get the index of a trigger input identified by its ID. More... | |
| bool8_t | DevTrInGetEnabled (TpDeviceHandle_t hDevice, uint16_t wInput) |
| Check whether a device trigger input is enabled. More... | |
| bool8_t | DevTrInSetEnabled (TpDeviceHandle_t hDevice, uint16_t wInput, bool8_t bEnable) |
| To select a device trigger input as trigger source, set trigger input enabled. More... | |
| uint64_t | DevTrInGetKinds (TpDeviceHandle_t hDevice, uint16_t wInput) |
| Get the supported trigger kinds for a specified device trigger input. More... | |
| uint64_t | DevTrInGetKind (TpDeviceHandle_t hDevice, uint16_t wInput) |
| Get the currently selected trigger kind for a specified device trigger input. More... | |
| uint64_t | DevTrInSetKind (TpDeviceHandle_t hDevice, uint16_t wInput, uint64_t qwKind) |
| Set the required trigger kind for a specified device trigger input. More... | |
| bool8_t | DevTrInIsAvailable (TpDeviceHandle_t hDevice, uint16_t wInput) |
| Check whether a device trigger input is available. More... | |
| uint32_t | DevTrInGetId (TpDeviceHandle_t hDevice, uint16_t wInput) |
| Get the id of a specified device trigger input. More... | |
| uint32_t | DevTrInGetName (TpDeviceHandle_t hDevice, uint16_t wInput, char *pBuffer, uint32_t dwBufferLength) |
| Get the name of a specified device trigger input. More... | |
| uint16_t | DevTrGetOutputCount (TpDeviceHandle_t hDevice) |
| Get the number of trigger outputs. More... | |
| uint16_t | DevTrGetOutputIndexById (TpDeviceHandle_t hDevice, uint32_t dwId) |
| Get the index of trigger output identified by its ID. More... | |
| bool8_t | DevTrOutGetEnabled (TpDeviceHandle_t hDevice, uint16_t wOutput) |
| Check whether a trigger output is enabled. More... | |
| bool8_t | DevTrOutSetEnabled (TpDeviceHandle_t hDevice, uint16_t wOutput, bool8_t bEnable) |
| Set trigger output enable. More... | |
| uint64_t | DevTrOutGetEvents (TpDeviceHandle_t hDevice, uint16_t wOutput) |
| Get the supported trigger output events for a specified device trigger output. More... | |
| uint64_t | DevTrOutGetEvent (TpDeviceHandle_t hDevice, uint16_t wOutput) |
| Get the currently selected trigger output event for a specified device trigger output. More... | |
| uint64_t | DevTrOutSetEvent (TpDeviceHandle_t hDevice, uint16_t wOutput, uint64_t qwEvent) |
| Set the trigger output event for a specified device trigger output. More... | |
| uint32_t | DevTrOutGetId (TpDeviceHandle_t hDevice, uint16_t wOutput) |
| Get the id of a specified device trigger output. More... | |
| uint32_t | DevTrOutGetName (TpDeviceHandle_t hDevice, uint16_t wOutput, char *pBuffer, uint32_t dwBufferLength) |
| Get the name of a specified device trigger output. More... | |
| uint16_t | ScpGetChannelCount (TpDeviceHandle_t hDevice) |
| Get the number of channels. More... | |
| bool8_t | ScpChIsAvailable (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether the channel is available. More... | |
| uint32_t | ScpChGetConnectorType (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the channel connector type. More... | |
| bool8_t | ScpChIsDifferential (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether the channel has a differential input. More... | |
| double | ScpChGetImpedance (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the channel input impedance. More... | |
| uint64_t | ScpChGetCouplings (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the supported coupling kinds of a specified channel. More... | |
| uint64_t | ScpChGetCoupling (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the currently set coupling of a specified channel. More... | |
| uint64_t | ScpChSetCoupling (TpDeviceHandle_t hDevice, uint16_t wCh, uint64_t qwCoupling) |
| Set the coupling of a specified channel. More... | |
| bool8_t | ScpChGetEnabled (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether a specified channel is currently enabled. More... | |
| bool8_t | ScpChSetEnabled (TpDeviceHandle_t hDevice, uint16_t wCh, bool8_t bEnable) |
| Set channel enable. More... | |
| double | ScpChGetProbeGain (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the currently set channel probe gain for a specified channel. More... | |
| double | ScpChSetProbeGain (TpDeviceHandle_t hDevice, uint16_t wCh, double dProbeGain) |
| Set the channel probe gain for a specified channel. More... | |
| double | ScpChGetProbeOffset (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the currently set channel probe offset for a specified channel. More... | |
| double | ScpChSetProbeOffset (TpDeviceHandle_t hDevice, uint16_t wCh, double dProbeOffset) |
| Set the channel probe offset for a specified channel. More... | |
| bool8_t | ScpChGetAutoRanging (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether auto ranging is enabled for a specified channel. More... | |
| bool8_t | ScpChSetAutoRanging (TpDeviceHandle_t hDevice, uint16_t wCh, bool8_t bEnable) |
| Set auto ranging for a specified channel. More... | |
| uint32_t | ScpChGetRanges (TpDeviceHandle_t hDevice, uint16_t wCh, double *pList, uint32_t dwLength) |
| Get the supported input ranges for a specified channel, with the currently selected coupling. More... | |
| double | ScpChGetRange (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the currently selected input range for a specified channel. More... | |
| double | ScpChSetRange (TpDeviceHandle_t hDevice, uint16_t wCh, double dRange) |
| Set the input range for a specified channel. More... | |
| bool8_t | ScpChHasTrigger (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether the specified channel has trigger support with the currently selected measure mode. More... | |
| bool8_t | ScpChTrIsAvailable (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether the channel trigger for the specified channel is available, with the current oscilloscope settings. More... | |
| bool8_t | ScpChTrGetEnabled (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether channel trigger for a specified channel is enabled. More... | |
| bool8_t | ScpChTrSetEnabled (TpDeviceHandle_t hDevice, uint16_t wCh, bool8_t bEnable) |
| To select a channel as trigger source, set channel trigger enable. More... | |
| uint64_t | ScpChTrGetKinds (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the supported channel trigger kinds for a specified channel with the currently selected measure mode. More... | |
| uint64_t | ScpChTrGetKind (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the currently selected channel trigger kind for a specified channel. More... | |
| uint64_t | ScpChTrSetKind (TpDeviceHandle_t hDevice, uint16_t wCh, uint64_t qwTriggerKind) |
| Set the channel trigger kind for a specified channel. More... | |
| uint32_t | ScpChTrGetLevelCount (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the number of channel trigger levels for a specified channel with the currently selected trigger kind. More... | |
| double | ScpChTrGetLevel (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex) |
| Get the currently set channel trigger level value for a specified channel and trigger level. More... | |
| double | ScpChTrSetLevel (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dLevel) |
| Set the channel trigger level value for a specified channel and trigger level. More... | |
| uint32_t | ScpChTrGetHysteresisCount (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the number of trigger hystereses for a specified channel with the currently selected trigger kind. More... | |
| double | ScpChTrGetHysteresis (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex) |
| Get the currently set channel trigger hysteresis value for a specified channel and trigger hysteresis. More... | |
| double | ScpChTrSetHysteresis (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dHysteresis) |
| Set the channel trigger hysteresis value for a specified channel and trigger hysteresis. More... | |
| uint32_t | ScpChTrGetConditions (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the supported trigger conditions for a specified channel with the currently selected trigger kind. More... | |
| uint32_t | ScpChTrGetCondition (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the current selected trigger condition for a specified channel. More... | |
| uint32_t | ScpChTrSetCondition (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwCondition) |
| Set the trigger condition for a specified channel. More... | |
| uint32_t | ScpChTrGetTimeCount (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the number of trigger times for the current trigger kind and trigger condition. More... | |
| double | ScpChTrGetTime (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex) |
| Get the current trigger time value for a specified channel and trigger type. More... | |
| double | ScpChTrSetTime (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dTime) |
| Set the required trigger time value for a specified channel and trigger type. More... | |
| uint64_t | ScpGetData (TpDeviceHandle_t hDevice, float **pBuffers, uint16_t wChannelCount, uint64_t qwStartIndex, uint64_t qwSampleCount) |
| Get the measurement data for specified channels. More... | |
| uint64_t | ScpGetData1Ch (TpDeviceHandle_t hDevice, float *pBufferCh1, uint64_t qwStartIndex, uint64_t qwSampleCount) |
| Get the measurement data for the first channel. More... | |
| uint64_t | ScpGetData2Ch (TpDeviceHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, uint64_t qwStartIndex, uint64_t qwSampleCount) |
| Get the measurement data for the first two channels. More... | |
| uint64_t | ScpGetData3Ch (TpDeviceHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, float *pBufferCh3, uint64_t qwStartIndex, uint64_t qwSampleCount) |
| Get the measurement data for the first three channels. More... | |
| uint64_t | ScpGetData4Ch (TpDeviceHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, float *pBufferCh3, float *pBufferCh4, uint64_t qwStartIndex, uint64_t qwSampleCount) |
| Get the measurement data for the first four channels. More... | |
| uint64_t | ScpGetValidPreSampleCount (TpDeviceHandle_t hDevice) |
| Get the number of valid pre samples in the measurement. More... | |
| void | ScpChGetDataValueRange (TpDeviceHandle_t hDevice, uint16_t wCh, double *pMin, double *pMax) |
| Get the minimum and maximum values of the input range the current data was measured with. More... | |
| double | ScpChGetDataValueMax (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the maximum value of the input range the current data was measured with. More... | |
| double | ScpChGetDataValueMin (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get the minimum value of the input range the current data was measured with. More... | |
| void | ScpSetCallbackDataReady (TpDeviceHandle_t hDevice, TpCallback_t pCallback, void *pData) |
| Set callback function which is called when the instrument has data ready. More... | |
| void | ScpSetCallbackDataOverflow (TpDeviceHandle_t hDevice, TpCallback_t pCallback, void *pData) |
| Set callback function which is called when the instrument has a data overflow. More... | |
| void | ScpSetCallbackConnectionTestCompleted (TpDeviceHandle_t hDevice, TpCallback_t pCallback, void *pData) |
| Set callback function which is called when the connection test is completed. More... | |
| void | ScpSetEventDataReady (TpDeviceHandle_t hDevice, int fdEvent) |
| void | ScpSetEventDataOverflow (TpDeviceHandle_t hDevice, int fdEvent) |
| void | ScpSetEventConnectionTestCompleted (TpDeviceHandle_t hDevice, int fdEvent) |
| void | ScpSetEventDataReady (TpDeviceHandle_t hDevice, HANDLE hEvent) |
| void | ScpSetEventDataOverflow (TpDeviceHandle_t hDevice, HANDLE hEvent) |
| void | ScpSetEventConnectionTestCompleted (TpDeviceHandle_t hDevice, HANDLE hEvent) |
| void | ScpSetMessageDataReady (TpDeviceHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam) |
| Set window handle to which a WM_LIBTIEPIE_SCP_DATAREADY message is sent when the instrument has data ready. More... | |
| void | ScpSetMessageDataOverflow (TpDeviceHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam) |
| Set window handle to which a WM_LIBTIEPIE_SCP_DATAOVERFLOW message is sent when a data overflow has occurred. More... | |
| void | ScpSetMessageConnectionTestCompleted (TpDeviceHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam) |
| Set window handle to which a WM_LIBTIEPIE_SCP_CONNECTIONTESTCOMPLETED message is sent when the connection test is completed. More... | |
| bool8_t | ScpStart (TpDeviceHandle_t hDevice) |
| Start a single measurement. More... | |
| void | ScpStop (TpDeviceHandle_t hDevice) |
| Stop a running measurement. More... | |
| void | ScpForceTrigger (TpDeviceHandle_t hDevice) |
| Force a trigger. More... | |
| uint32_t | ScpGetMeasureModes (TpDeviceHandle_t hDevice) |
| Get the supported measure modes for a specified device. More... | |
| uint32_t | ScpGetMeasureMode (TpDeviceHandle_t hDevice) |
| Get the current measure mode. More... | |
| uint32_t | ScpSetMeasureMode (TpDeviceHandle_t hDevice, uint32_t dwMeasureMode) |
| Set the measure mode. More... | |
| bool8_t | ScpIsRunning (TpDeviceHandle_t hDevice) |
| Check whether the instrument is currently measuring. More... | |
| bool8_t | ScpIsTriggered (TpDeviceHandle_t hDevice) |
| Check whether the instrument has triggered. More... | |
| bool8_t | ScpIsDataReady (TpDeviceHandle_t hDevice) |
| Check whether new, unread measured data is available. More... | |
| bool8_t | ScpIsDataOverflow (TpDeviceHandle_t hDevice) |
| Check whether a data overflow has occurred. More... | |
| uint32_t | ScpGetAutoResolutionModes (TpDeviceHandle_t hDevice) |
| Get the supported auto resolution modes. More... | |
| uint32_t | ScpGetAutoResolutionMode (TpDeviceHandle_t hDevice) |
| Get the current auto resolution mode. More... | |
| uint32_t | ScpSetAutoResolutionMode (TpDeviceHandle_t hDevice, uint32_t dwAutoResolutionMode) |
| Set the auto resolution mode. More... | |
| uint32_t | ScpGetResolutions (TpDeviceHandle_t hDevice, uint8_t *pList, uint32_t dwLength) |
| Get an array with the supported resolutions of the specified device. More... | |
| uint8_t | ScpGetResolution (TpDeviceHandle_t hDevice) |
| Get the current resolution. More... | |
| uint8_t | ScpSetResolution (TpDeviceHandle_t hDevice, uint8_t byResolution) |
| Set the resolution. More... | |
| bool8_t | ScpIsResolutionEnhanced (TpDeviceHandle_t hDevice) |
| Check whether the currently selected resolution is enhanced or a native resolution of the hardware. More... | |
| uint32_t | ScpGetClockSources (TpDeviceHandle_t hDevice) |
| Get supported clock sources. More... | |
| uint32_t | ScpGetClockSource (TpDeviceHandle_t hDevice) |
| Get clock source. More... | |
| uint32_t | ScpSetClockSource (TpDeviceHandle_t hDevice, uint32_t dwClockSource) |
| Set clock source. More... | |
| uint32_t | ScpGetClockOutputs (TpDeviceHandle_t hDevice) |
| Get supported clock outputs. More... | |
| uint32_t | ScpGetClockOutput (TpDeviceHandle_t hDevice) |
| Get clock output. More... | |
| uint32_t | ScpSetClockOutput (TpDeviceHandle_t hDevice, uint32_t dwClockOutput) |
| Set clock output. More... | |
| double | ScpGetPreSampleRatio (TpDeviceHandle_t hDevice) |
| Get the current pre sample ratio. More... | |
| double | ScpSetPreSampleRatio (TpDeviceHandle_t hDevice, double dPreSampleRatio) |
| Set the pre sample ratio. More... | |
| uint64_t | ScpGetTriggerHoldOffCountMax (TpDeviceHandle_t hDevice) |
| Get maximum trigger hold off count in samples. More... | |
| uint64_t | ScpGetTriggerHoldOffCount (TpDeviceHandle_t hDevice) |
| Get trigger hold off count in samples. More... | |
| uint64_t | ScpSetTriggerHoldOffCount (TpDeviceHandle_t hDevice, uint64_t qwTriggerHoldOffCount) |
| Set trigger hold off count in samples. More... | |
| uint64_t | ScpGetRecordLengthMax (TpDeviceHandle_t hDevice) |
| Get the maximum supported record length of a specified device. More... | |
| uint64_t | ScpGetRecordLength (TpDeviceHandle_t hDevice) |
| Get the currently selected record length. More... | |
| uint64_t | ScpSetRecordLength (TpDeviceHandle_t hDevice, uint64_t qwRecordLength) |
| Set the record length. More... | |
| double | ScpGetSampleFrequencyMax (TpDeviceHandle_t hDevice) |
| Get the maximum supported sample frequency of a specified device. More... | |
| double | ScpGetSampleFrequency (TpDeviceHandle_t hDevice) |
| Get the currently selected sample frequency. More... | |
| double | ScpSetSampleFrequency (TpDeviceHandle_t hDevice, double dSampleFrequency) |
| Set the sample frequency. More... | |
| uint32_t | ScpGetSegmentCountMax (TpDeviceHandle_t hDevice) |
| Get the maximum supported number of segments. More... | |
| uint32_t | ScpGetSegmentCount (TpDeviceHandle_t hDevice) |
| Get the currently selected number of segments. More... | |
| uint32_t | ScpSetSegmentCount (TpDeviceHandle_t hDevice, uint32_t dwSegmentCount) |
| Set the number of segments. More... | |
| double | ScpGetTriggerTimeOut (TpDeviceHandle_t hDevice) |
| Get the currently selected trigger time out in seconds. More... | |
| double | ScpSetTriggerTimeOut (TpDeviceHandle_t hDevice, double dTimeOut) |
| Set trigger time out in seconds. More... | |
| double | ScpGetTriggerDelay (TpDeviceHandle_t hDevice) |
| Get the currently selected trigger delay in seconds. More... | |
| double | ScpSetTriggerDelay (TpDeviceHandle_t hDevice, double dDelay) |
| Set trigger delay in seconds. More... | |
| uint64_t | ScpGetTriggerSources (TpDeviceHandle_t hDevice) |
| Get supported trigger sources. More... | |
| uint64_t | ScpGetTriggerSourceOR (TpDeviceHandle_t hDevice) |
| Get trigger sources OR. More... | |
| uint64_t | ScpSetTriggerSourceOR (TpDeviceHandle_t hDevice, uint64_t qwTriggerSourceMask) |
| Set trigger sources OR. More... | |
| uint64_t | ScpGetTriggerSourceAND (TpDeviceHandle_t hDevice) |
| Get trigger sources AND. More... | |
| uint64_t | ScpSetTriggerSourceAND (TpDeviceHandle_t hDevice, uint64_t qwTriggerSourceMask) |
| Set trigger sources AND. More... | |
| uint64_t | ScpGetTriggerKinds (TpDeviceHandle_t hDevice, uint64_t qwTriggerSourceMask) |
| Get supported trigger kinds by source(s). More... | |
| uint64_t | ScpGetTriggerKind (TpDeviceHandle_t hDevice, uint64_t qwTriggerSource) |
| Get trigger kind. More... | |
| uint64_t | ScpSetTriggerKind (TpDeviceHandle_t hDevice, uint64_t qwTriggerSource, uint64_t qwTriggerKind) |
| Set trigger kind. More... | |
| double | ScpGetTriggerLevel (TpDeviceHandle_t hDevice, uint64_t qwTriggerSource, uint32_t dwIndex) |
| Get trigger level. More... | |
| double | ScpSetTriggerLevel (TpDeviceHandle_t hDevice, uint64_t qwTriggerSource, uint32_t dwIndex, double dLevel) |
| Set trigger level. More... | |
| double | ScpGetTriggerHysteresis (TpDeviceHandle_t hDevice, uint64_t qwTriggerSource, uint32_t dwIndex) |
| Get trigger hysteresis. More... | |
| double | ScpSetTriggerHysteresis (TpDeviceHandle_t hDevice, uint64_t qwTriggerSource, uint32_t dwIndex, double dHysteresis) |
| Set trigger hysteresis. More... | |
| uint64_t | ScpChGetTriggerKinds (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get supported channel trigger kinds. More... | |
| uint64_t | ScpChGetTriggerKind (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get channel trigger kind. More... | |
| uint64_t | ScpChSetTriggerKind (TpDeviceHandle_t hDevice, uint16_t wCh, uint64_t qwTriggerKind) |
| Set channel trigger kind. More... | |
| double | ScpChGetTriggerLevel (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex) |
| Get channel trigger level. More... | |
| double | ScpChSetTriggerLevel (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dLevel) |
| Set channel trigger level. More... | |
| double | ScpChGetTriggerHysteresis (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex) |
| Get channel trigger hysteresis. More... | |
| double | ScpChSetTriggerHysteresis (TpDeviceHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dHysteresis) |
| Set channel trigger hysteresis. More... | |
| double | ScpChGetTriggerPulseTime (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Get channel trigger pulse time. More... | |
| double | ScpChSetTriggerPulseTime (TpDeviceHandle_t hDevice, uint16_t wCh, double dPulseTime) |
| Set channel trigger pulse time. More... | |
| bool8_t | ScpHasConnectionTest (TpDeviceHandle_t hDevice) |
| Check whether the instrument supports connection testing. More... | |
| bool8_t | ScpChHasConnectionTest (TpDeviceHandle_t hDevice, uint16_t wCh) |
| Check whether this channel supports connection testing. More... | |
| bool8_t | ScpStartConnectionTest (TpDeviceHandle_t hDevice, uint64_t qwChannelMask) |
| Perform a connection test. More... | |
| bool8_t | ScpIsConnectionTestCompleted (TpDeviceHandle_t hDevice) |
| Check whether the connection test is completed. More... | |
| uint16_t | ScpGetConnectionTestData (TpDeviceHandle_t hDevice, LibTiePieTriState_t *pBuffer, uint16_t wChannelCount) |
| Get the connection test result data. More... | |
| uint32_t | GenGetConnectorType (TpDeviceHandle_t hDevice) |
| Get output connector type. More... | |
| bool8_t | GenIsDifferential (TpDeviceHandle_t hDevice) |
| Check whether the output is differential. More... | |
| double | GenGetImpedance (TpDeviceHandle_t hDevice) |
| Get output impedance. More... | |
| uint8_t | GenGetResolution (TpDeviceHandle_t hDevice) |
| Get resolution. More... | |
| double | GenGetOutputValueMin (TpDeviceHandle_t hDevice) |
| Get minimum output value. More... | |
| double | GenGetOutputValueMax (TpDeviceHandle_t hDevice) |
| Get maximum output value. More... | |
| void | GenGetOutputValueMinMax (TpDeviceHandle_t hDevice, double *pMin, double *pMax) |
| Get minimum and/or maximum output value. More... | |
| bool8_t | GenIsControllable (TpDeviceHandle_t hDevice) |
| Check whether the generator can be controlled. More... | |
| bool8_t | GenGetOutputOn (TpDeviceHandle_t hDevice) |
| Check whether generator output is on. More... | |
| bool8_t | GenSetOutputOn (TpDeviceHandle_t hDevice, bool8_t bOutputOn) |
| Enable or disable generator output. More... | |
| void | GenStart (TpDeviceHandle_t hDevice) |
| Start generator. More... | |
| void | GenStop (TpDeviceHandle_t hDevice) |
| Stop generator. More... | |
| bool8_t | GenIsBurstActive (TpDeviceHandle_t hDevice) |
| Check whether burst is active. More... | |
| uint64_t | GenGetBurstCount (TpDeviceHandle_t hDevice) |
| Get burst count. More... | |
| uint64_t | GenGetBurstCountMax (TpDeviceHandle_t hDevice) |
| Get maximum burst count. More... | |
| uint64_t | GenSetBurstCount (TpDeviceHandle_t hDevice, uint64_t qwBurstCount) |
| Set burst count. More... | |
| uint64_t | GenGetBurstModes (TpDeviceHandle_t hDevice) |
| Get supported generator burst modes. More... | |
| uint64_t | GenGetBurstMode (TpDeviceHandle_t hDevice) |
| Get generator burst mode. More... | |
| uint64_t | GenSetBurstMode (TpDeviceHandle_t hDevice, uint64_t qwBurstMode) |
| Set generator burst mode. More... | |
| uint32_t | GenGetSignalTypes (TpDeviceHandle_t hDevice) |
| Get supported signal types. More... | |
| uint32_t | GenGetSignalType (TpDeviceHandle_t hDevice) |
| Get signal type. More... | |
| uint32_t | GenSetSignalType (TpDeviceHandle_t hDevice, uint32_t dwSignalType) |
| Set signal type. More... | |
| double | GenGetAmplitudeMax (TpDeviceHandle_t hDevice) |
| Get the maximum signal amplitude. More... | |
| double | GenGetAmplitudeMin (TpDeviceHandle_t hDevice) |
| Get the minimum signal amplitude. More... | |
| double | GenGetAmplitude (TpDeviceHandle_t hDevice) |
| Get the signal amplitude. More... | |
| double | GenSetAmplitude (TpDeviceHandle_t hDevice, double dAmplitude) |
| Set the signal amplitude. More... | |
| uint32_t | GenGetAmplitudeRanges (TpDeviceHandle_t hDevice, double *pList, uint32_t dwLength) |
| Get the supported amplitude ranges. More... | |
| double | GenGetAmplitudeRange (TpDeviceHandle_t hDevice) |
| Get the amplitude range. More... | |
| double | GenSetAmplitudeRange (TpDeviceHandle_t hDevice, double dRange) |
| Set the amplitude range. More... | |
| bool8_t | GenGetAmplitudeAutoRanging (TpDeviceHandle_t hDevice) |
| Get amplitude auto ranging. More... | |
| bool8_t | GenSetAmplitudeAutoRanging (TpDeviceHandle_t hDevice, bool8_t bEnable) |
| Set amplitude auto ranging. More... | |
| void | GenGetFrequencyMinMax (TpDeviceHandle_t hDevice, uint32_t dwFrequencyMode, double *pMin, double *pMax) |
| Get minimum and maximum signal/sample frequency by mode. More... | |
| double | GenGetFrequencyMin (TpDeviceHandle_t hDevice) |
| Get minimum signal/sample frequency. More... | |
| double | GenGetFrequencyMax (TpDeviceHandle_t hDevice) |
| Get maximum signal/sample frequency. More... | |
| double | GenGetFrequency (TpDeviceHandle_t hDevice) |
| Get signal/sample frequency. More... | |
| double | GenSetFrequency (TpDeviceHandle_t hDevice, double dFrequency) |
| Set signal/sample frequency. More... | |
| uint32_t | GenGetFrequencyModes (TpDeviceHandle_t hDevice) |
| Get supported generator frequency modes. More... | |
| uint32_t | GenGetFrequencyMode (TpDeviceHandle_t hDevice) |
| Get generator frequency mode. More... | |
| uint32_t | GenSetFrequencyMode (TpDeviceHandle_t hDevice, uint32_t dwFrequencyMode) |
| Set generator frequency mode. More... | |
| double | GenGetOffsetMin (TpDeviceHandle_t hDevice) |
| Get minimum signal offset. More... | |
| double | GenGetOffsetMax (TpDeviceHandle_t hDevice) |
| Get maximum signal offset. More... | |
| double | GenGetOffset (TpDeviceHandle_t hDevice) |
| Get signal offset. More... | |
| double | GenSetOffset (TpDeviceHandle_t hDevice, double dOffset) |
| Set signal offset. More... | |
| double | GenGetPhaseMin (TpDeviceHandle_t hDevice) |
| Get minimum signal phase. More... | |
| double | GenGetPhaseMax (TpDeviceHandle_t hDevice) |
| Get maximum signal phase. More... | |
| double | GenGetPhase (TpDeviceHandle_t hDevice) |
| Get signal phase. More... | |
| double | GenSetPhase (TpDeviceHandle_t hDevice, double dPhase) |
| Set signal phase. More... | |
| double | GenGetSymmetryMin (TpDeviceHandle_t hDevice) |
| Get minimum signal symmetry. More... | |
| double | GenGetSymmetryMax (TpDeviceHandle_t hDevice) |
| Get maximum signal symmetry. More... | |
| double | GenGetSymmetry (TpDeviceHandle_t hDevice) |
| Get signal symmetry. More... | |
| double | GenSetSymmetry (TpDeviceHandle_t hDevice, double dSymmetry) |
| Set signal symmetry. More... | |
| uint64_t | GenGetDataLengthMin (TpDeviceHandle_t hDevice) |
| Get the minimum length of the waveform buffer. More... | |
| uint64_t | GenGetDataLengthMax (TpDeviceHandle_t hDevice) |
| Get the maximum length of the waveform buffer. More... | |
| uint64_t | GenGetDataLength (TpDeviceHandle_t hDevice) |
| Get the length of the currently loaded waveform pattern. More... | |
| void | GenSetData (TpDeviceHandle_t hDevice, float *pBuffer, uint64_t qwSampleCount) |
| Load a waveform pattern into the waveform buffer. More... | |
| void | GenSetCallbackBurstCompleted (TpDeviceHandle_t hDevice, TpCallback_t pCallback, void *pData) |
| Set callback function which is called when the generator burst is completed. More... | |
| void | GenSetCallbackControllableChanged (TpDeviceHandle_t hDevice, TpCallback_t pCallback, void *pData) |
| Set callback function which is called when the generator controllable property changes. More... | |
| void | GenSetEventBurstCompleted (TpDeviceHandle_t hDevice, int fdEvent) |
| Set event file descriptor which is set when the generator burst is completed. More... | |
| void | GenSetEventControllableChanged (TpDeviceHandle_t hDevice, int fdEvent) |
| Set event file descriptor which is set when the generator controllable property changes. More... | |
| void | GenSetEventBurstCompleted (TpDeviceHandle_t hDevice, HANDLE hEvent) |
| Set event object handle which is set when the generator burst is completed. More... | |
| void | GenSetEventControllableChanged (TpDeviceHandle_t hDevice, HANDLE hEvent) |
| Set event object handle which is set when the generator controllable property changes. More... | |
| void | GenSetMessageBurstCompleted (TpDeviceHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam) |
| Set window handle to which a WM_LIBTIEPIE_GEN_BURSTCOMPLETED message is sent when the generator burst is completed. More... | |
| void | GenSetMessageControllableChanged (TpDeviceHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam) |
| Set window handle to which a WM_LIBTIEPIE_GEN_CONTROLLABLECHANGED message is sent when the generator controllable property changes. More... | |
| uint32_t | GenGetModes (TpDeviceHandle_t hDevice) |
| Get supported generator frequency modes. More... | |
| uint32_t | GenGetMode (TpDeviceHandle_t hDevice) |
| Get generator frequency mode. More... | |
| uint32_t | GenSetMode (TpDeviceHandle_t hDevice, uint32_t dwMode) |
| Set generator frequency mode. More... | |
| bool8_t | GenGetAutoRanging (TpDeviceHandle_t hDevice) |
| Get auto ranging. More... | |
| bool8_t | GenSetAutoRanging (TpDeviceHandle_t hDevice, bool8_t bEnable) |
| Set auto ranging. More... | |
| uint32_t | GenGetRanges (TpDeviceHandle_t hDevice, double *pList, uint32_t dwLength) |
| Get supported ranges. More... | |
| double | GenGetRange (TpDeviceHandle_t hDevice) |
| Get range. More... | |
| double | GenSetRange (TpDeviceHandle_t hDevice, double dRange) |
| Set range. More... | |
| uint64_t | GenGetTriggerSources (TpDeviceHandle_t hDevice) |
| Get supported trigger sources. More... | |
| uint64_t | GenGetTriggerSourceAND (TpDeviceHandle_t hDevice) |
| Get trigger sources AND. More... | |
| uint64_t | GenSetTriggerSourceAND (TpDeviceHandle_t hDevice, uint64_t qwTriggerSourceMask) |
| Set trigger sources AND. More... | |
| uint64_t | GenGetTriggerSourceOR (TpDeviceHandle_t hDevice) |
| Get trigger sources OR. More... | |
| uint64_t | GenSetTriggerSourceOR (TpDeviceHandle_t hDevice, uint64_t qwTriggerSourceMask) |
| Set trigger sources OR. More... | |
| bool8_t | I2CIsInternalAddress (TpDeviceHandle_t hDevice, uint16_t wAddress) |
| Check whether an address is used internally. More... | |
| bool8_t | I2CRead (TpDeviceHandle_t hDevice, uint16_t wAddress, void *pBuffer, uint32_t dwSize, bool8_t bStop) |
| Read data from the I2C bus. More... | |
| bool8_t | I2CReadByte (TpDeviceHandle_t hDevice, uint16_t wAddress, uint8_t *pValue) |
| Read one byte from the I2C bus. More... | |
| bool8_t | I2CReadWord (TpDeviceHandle_t hDevice, uint16_t wAddress, uint16_t *pValue) |
| Read one word from the I2C bus. More... | |
| bool8_t | I2CWrite (TpDeviceHandle_t hDevice, uint16_t wAddress, void *pBuffer, uint32_t dwSize, bool8_t bStop) |
| Write data to the I2C bus. More... | |
| bool8_t | I2CWriteByte (TpDeviceHandle_t hDevice, uint16_t wAddress, uint8_t byValue) |
| Write one byte to the I2C bus. More... | |
| bool8_t | I2CWriteByteByte (TpDeviceHandle_t hDevice, uint16_t wAddress, uint8_t byValue1, uint8_t byValue2) |
| Write two bytes to the I2C bus. More... | |
| bool8_t | I2CWriteByteWord (TpDeviceHandle_t hDevice, uint16_t wAddress, uint8_t byValue1, uint16_t wValue2) |
| Write one byte and one word to the I2C bus. More... | |
| bool8_t | I2CWriteWord (TpDeviceHandle_t hDevice, uint16_t wAddress, uint16_t wValue) |
| Write one word to the I2C bus. More... | |
| double | I2CGetSpeed (TpDeviceHandle_t hDevice) |
| Get the current I2C bus frequency. More... | |
| double | I2CGetSpeedMax (TpDeviceHandle_t hDevice) |
| Get the maximum I2C bus frequency. More... | |
| double | I2CSetSpeed (TpDeviceHandle_t hDevice, double dSpeed) |
| Set the I2C bus frequency. More... | |
| LibTiePiePointerArray_t | HlpPointerArrayNew (uint32_t dwLength) |
| Create a new pointer array. More... | |
| void | HlpPointerArrayDelete (LibTiePiePointerArray_t pArray) |
| Delete an existing pointer array. More... | |
| void | HlpPointerArraySet (LibTiePiePointerArray_t pArray, uint32_t dwIndex, void *pPointer) |
| Set a pointer in a pointer array. More... | |
Header for libtiepie.
Definition in file libtiepie.h.
| #define LIBTIEPIE_VERSION_MAJOR 0 |
Definition at line 63 of file libtiepie.h.
| #define LIBTIEPIE_VERSION_MINOR 4 |
Definition at line 64 of file libtiepie.h.
| #define LIBTIEPIE_VERSION_RELEASE 5 |
Definition at line 65 of file libtiepie.h.
| #define LIBTIEPIE_REVISION 5524 |
Definition at line 67 of file libtiepie.h.
1.8.8