libtiepie.h File Reference

Header for libtiepie. More...

Go to the source code of this file.

Macros
#define	LIBTIEPIE_VERSION_MAJOR   0
#define	LIBTIEPIE_VERSION_MINOR   7
#define	LIBTIEPIE_VERSION_RELEASE   4
#define	LIBTIEPIE_VERSION_NUMBER   "0.7.4"
#define	LIBTIEPIE_VERSION   "0.7.4"
#define	LIBTIEPIE_REVISION   12616
#define	LIBTIEPIE_HANDLE_INVALID   0
#define	TPDEVICEHANDLE_INVALID   LIBTIEPIE_HANDLE_INVALID
#define	LIBTIEPIE_INTERFACE_DEVICE   0x0000000000000001
#define	LIBTIEPIE_INTERFACE_OSCILLOSCOPE   0x0000000000000002
#define	LIBTIEPIE_INTERFACE_GENERATOR   0x0000000000000004
#define	LIBTIEPIE_INTERFACE_I2CHOST   0x0000000000000008
#define	DEVICETYPE_OSCILLOSCOPE   0x00000001
	Oscilloscope. More...
#define	DEVICETYPE_GENERATOR   0x00000002
	Generator. More...
#define	DEVICETYPE_I2CHOST   0x00000004
	I2C Host. More...
#define	DEVICETYPE_COUNT   3
	Number of device types. More...
#define	IDKIND_PRODUCTID   0x00000001
	dwId parameter is a product id. More...
#define	IDKIND_INDEX   0x00000002
	dwId parameter is an index. More...
#define	IDKIND_SERIALNUMBER   0x00000004
	dwId parameter is a serial number. More...
#define	IDKIND_COUNT   3
	Number of id kinds. More...
#define	LIBTIEPIESTATUS_SUCCESS   0
	The function executed successfully. More...
#define	LIBTIEPIESTATUS_VALUE_CLIPPED   1
	One of the parameters of the last called function was outside the valid range and clipped to the closest limit. More...
#define	LIBTIEPIESTATUS_VALUE_MODIFIED   2
	One of the parameters of the last called function was within the valid range but not available. The closest valid value is set. More...
#define	LIBTIEPIESTATUS_UNSUCCESSFUL   -1
	An error occurred during execution of the last called function. More...
#define	LIBTIEPIESTATUS_NOT_SUPPORTED   -2
	The requested functionality is not supported by the hardware. More...
#define	LIBTIEPIESTATUS_INVALID_HANDLE   -3
	The handle to the device is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_VALUE   -4
	The requested value is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_CHANNEL   -5
	The requested channel number is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_TRIGGER_SOURCE   -6
	The requested trigger source is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_DEVICE_TYPE   -7
	The device type is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_DEVICE_INDEX   -8
	The device index is invalid, must be < LstGetCount(). More...
#define	LIBTIEPIESTATUS_INVALID_PRODUCT_ID   -9
	There is no device with the requested product ID. More...
#define	LIBTIEPIESTATUS_INVALID_DEVICE_SERIALNUMBER   -10
	There is no device with the requested serial number. More...
#define	LIBTIEPIESTATUS_OBJECT_GONE   -11
	The object indicated by the handle is no longer available. More...
#define	LIBTIEPIESTATUS_DEVICE_GONE   LIBTIEPIESTATUS_OBJECT_GONE
#define	LIBTIEPIESTATUS_INTERNAL_ADDRESS   -12
	The requested I2C address is an internally used address in the device. More...
#define	LIBTIEPIESTATUS_NOT_CONTROLLABLE   -13
	The generator is currently not controllable, see GenIsControllable. More...
#define	LIBTIEPIESTATUS_BIT_ERROR   -14
	The requested I2C operation generated a bit error. More...
#define	LIBTIEPIESTATUS_NO_ACKNOWLEDGE   -15
	The requested I2C operation generated "No acknowledge". More...
#define	LIBTIEPIESTATUS_INVALID_CONTAINED_DEVICE_SERIALNUMBER   -16
	A device with the requested serial number is not available in the combined instrument, see LstDevGetContainedSerialNumbers. More...
#define	LIBTIEPIESTATUS_INVALID_INPUT   -17
	The requested trigger input is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_OUTPUT   -18
	The requested trigger output is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_DRIVER   -19
	The currently installed driver is not supported, see LstDevGetRecommendedDriverVersion(). (Windows only) More...
#define	LIBTIEPIESTATUS_NOT_AVAILABLE   -20
	With the current settings, the requested functionality is not available. More...
#define	LIBTIEPIESTATUS_INVALID_FIRMWARE   -21
	The currently used firmware is not supported . More...
#define	LIBTIEPIESTATUS_INVALID_INDEX   -22
	The requested index is invalid. More...
#define	LIBTIEPIESTATUS_INVALID_EEPROM   -23
	The instrument's EEPROM content is damaged, please contact TiePie engineering support. More...
#define	LIBTIEPIESTATUS_INITIALIZATION_FAILED   -24
	The instrument's initialization failed, please contact TiePie engineering support. More...
#define	LIBTIEPIESTATUS_LIBRARY_NOT_INITIALIZED   -25
	The library is not initialized, see LibInit(). More...
#define	LIBTIEPIESTATUS_NO_TRIGGER_ENABLED   -26
	The current setup requires a trigger input to be enabled. More...
#define	LIBTIEPIESTATUS_SYNCHRONIZATION_FAILED   -29
	XXX. More...
#define	LIBTIEPIESTATUS_INVALID_HS56_COMBINED_DEVICE   -30
	At least one Handyscope HS6 DIFF must be located at the beginning or end of the CMI daisy chain. More...
#define	LIBTIEPIESTATUS_MEASUREMENT_RUNNING   -31
	A measurement is already running. More...
#define	LIBTIEPIESTATUS_INITIALIZATION_ERROR_10001   -10001
	The instrument's initialization failed (code: 10001), please contact TiePie engineering support. More...
#define	LIBTIEPIESTATUS_INITIALIZATION_ERROR_10002   -10002
	The instrument's initialization failed (code: 10002), please contact TiePie engineering support. More...
#define	LIBTIEPIESTATUS_INITIALIZATION_ERROR_10003   -10003
	The instrument's initialization failed (code: 10003), please contact TiePie engineering support. More...
#define	LIBTIEPIESTATUS_INITIALIZATION_ERROR_10004   -10004
	The instrument's initialization failed (code: 10004), please contact TiePie engineering support. More...
#define	LIBTIEPIESTATUS_INITIALIZATION_ERROR_10005   -10005
	The instrument's initialization failed (code: 10005), please contact TiePie engineering support. More...
#define	LIBTIEPIESTATUS_INITIALIZATION_ERROR_10006   -10006
	The instrument's initialization failed (code: 10006), please contact TiePie engineering support. More...
#define	CONNECTORTYPE_UNKNOWN   0x00000000
#define	CONNECTORTYPE_BNC   0x00000001
#define	CONNECTORTYPE_BANANA   0x00000002
#define	CONNECTORTYPE_POWERPLUG   0x00000004
#define	CONNECTORTYPE_COUNT   3
	Number of connector types. More...
#define	CONNECTORTYPE_MASK   ( CONNECTORTYPE_BNC | CONNECTORTYPE_BANANA | CONNECTORTYPE_POWERPLUG )
#define	DATARAWTYPE_UNKNOWN   0x00000000
#define	DATARAWTYPE_INT8   0x00000001
	int8_t More...
#define	DATARAWTYPE_INT16   0x00000002
	int16_t More...
#define	DATARAWTYPE_INT32   0x00000004
	int32_t More...
#define	DATARAWTYPE_INT64   0x00000008
	int64_t More...
#define	DATARAWTYPE_UINT8   0x00000010
	uint8_t More...
#define	DATARAWTYPE_UINT16   0x00000020
	uint16_t More...
#define	DATARAWTYPE_UINT32   0x00000040
	uint32_t More...
#define	DATARAWTYPE_UINT64   0x00000080
	uint64_t More...
#define	DATARAWTYPE_FLOAT32   0x00000100
	float More...
#define	DATARAWTYPE_FLOAT64   0x00000200
	double More...
#define	DATARAWTYPE_COUNT   10
	Number of raw data types. More...
#define	DATARAWTYPE_MASK_INT   ( DATARAWTYPE_INT8 | DATARAWTYPE_INT16 | DATARAWTYPE_INT32 | DATARAWTYPE_INT64 )
#define	DATARAWTYPE_MASK_UINT   ( DATARAWTYPE_UINT8 | DATARAWTYPE_UINT16 | DATARAWTYPE_UINT32 | DATARAWTYPE_UINT64 )
#define	DATARAWTYPE_MASK_FLOAT   ( DATARAWTYPE_FLOAT32 | DATARAWTYPE_FLOAT64 )
#define	DATARAWTYPE_MASK_FIXED   ( DATARAWTYPE_MASK_INT | DATARAWTYPE_MASK_UINT )
#define	BOOL8_FALSE   0
#define	BOOL8_TRUE   1
#define	LIBTIEPIE_TRISTATE_UNDEFINED   0
	Undefined. More...
#define	LIBTIEPIE_TRISTATE_FALSE   1
	False. More...
#define	LIBTIEPIE_TRISTATE_TRUE   2
	True. More...
#define	LIBTIEPIE_TRIGGERIO_INDEX_INVALID   0xffff
#define	LIBTIEPIE_STRING_LENGTH_NULL_TERMINATED   0xffffffff
#define	LIBTIEPIE_POINTER_ARRAY_MAX_LENGTH   256
#define	ARN_COUNT   3
	Number of auto resolution modes. More...
#define	ARB_DISABLED   0
#define	ARB_NATIVEONLY   1
#define	ARB_ALL   2
#define	AR_UNKNOWN   0
	Unknown/invalid mode. More...
#define	AR_DISABLED   ( 1 << ARB_DISABLED )
	Resolution does not automatically change. More...
#define	AR_NATIVEONLY   ( 1 << ARB_NATIVEONLY )
	Highest possible native resolution for the current sample frequency is used. More...
#define	AR_ALL   ( 1 << ARB_ALL )
	Highest possible native or enhanced resolution for the current sample frequency is used. More...
#define	ARM_NONE   0
#define	ARM_ALL   ( ( 1 << ARN_COUNT ) - 1 )
#define	ARM_ENABLED   ( ARM_ALL & ~AR_DISABLED )
#define	CKN_COUNT   5
	Number of couplings. More...
#define	CKB_DCV   0
	Volt DC. More...
#define	CKB_ACV   1
	Volt AC. More...
#define	CKB_DCA   2
	Ampere DC. More...
#define	CKB_ACA   3
	Ampere AC. More...
#define	CKB_OHM   4
	Ohm. More...
#define	CK_UNKNOWN   0
	Unknown/invalid coupling. More...
#define	CK_DCV   ( 1 << CKB_DCV )
	Volt DC. More...
#define	CK_ACV   ( 1 << CKB_ACV )
	Volt AC. More...
#define	CK_DCA   ( 1 << CKB_DCA )
	Ampere DC. More...
#define	CK_ACA   ( 1 << CKB_ACA )
	Ampere AC. More...
#define	CK_OHM   ( 1 << CKB_OHM )
	Ohm. More...
#define	CKM_NONE   0
#define	CKM_V   ( CK_DCV | CK_ACV )
	Volt. More...
#define	CKM_A   ( CK_DCA | CK_ACA )
	Ampere. More...
#define	CKM_OHM   ( CK_OHM )
	Ohm. More...
#define	CKM_ASYMMETRICRANGE   ( CKM_OHM )
	0 to +Range More...
#define	CKM_SYMMETRICRANGE   ( CKM_V | CKM_A )
	-Range to +Range More...
#define	CON_COUNT   3
	Number of clock output types. More...
#define	COB_DISABLED   0
	No clock output. More...
#define	COB_SAMPLE   1
	Sample clock. More...
#define	COB_FIXED   2
	Fixed clock. More...
#define	CO_DISABLED   ( 1 << COB_DISABLED )
	No clock output. More...
#define	CO_SAMPLE   ( 1 << COB_SAMPLE )
	Sample clock. More...
#define	CO_FIXED   ( 1 << COB_FIXED )
	Fixed clock. More...
#define	COM_NONE   0
#define	COM_ALL   ( ( 1 << CON_COUNT ) - 1 )
#define	COM_ENABLED   ( COM_ALL & ~CO_DISABLED )
#define	COM_FREQUENCY   ( CO_FIXED )
#define	CSN_COUNT   2
	Number of clock sources. More...
#define	CSB_EXTERNAL   0
	External clock. More...
#define	CSB_INTERNAL   1
	Internal clock. More...
#define	CS_EXTERNAL   ( 1 << CSB_EXTERNAL )
	External clock. More...
#define	CS_INTERNAL   ( 1 << CSB_INTERNAL )
	Internal clock. More...
#define	CSM_NONE   0
#define	CSM_ALL   ( ( 1 << CSN_COUNT ) - 1 )
#define	CSM_FREQUENCY   ( CS_EXTERNAL )
#define	FMN_COUNT   2
	Number of frequency modes. More...
#define	FMB_SIGNALFREQUENCY   0
#define	FMB_SAMPLEFREQUENCY   1
#define	FM_UNKNOWN   0x00000000
#define	FM_SIGNALFREQUENCY   ( 1 << FMB_SIGNALFREQUENCY )
#define	FM_SAMPLEFREQUENCY   ( 1 << FMB_SAMPLEFREQUENCY )
#define	FMM_NONE   0x00000000
#define	FMM_ALL   ( ( 1 << FMN_COUNT ) - 1 )
#define	GMN_COUNT   12
	Number of generator modes. More...
#define	GMB_CONTINUOUS   0
#define	GMB_BURST_COUNT   1
#define	GMB_GATED_PERIODS   2
#define	GMB_GATED   3
#define	GMB_GATED_PERIOD_START   4
#define	GMB_GATED_PERIOD_FINISH   5
#define	GMB_GATED_RUN   6
#define	GMB_GATED_RUN_OUTPUT   7
#define	GMB_BURST_SAMPLE_COUNT   8
#define	GMB_BURST_SAMPLE_COUNT_OUTPUT   9
#define	GMB_BURST_SEGMENT_COUNT   10
#define	GMB_BURST_SEGMENT_COUNT_OUTPUT   11
#define	GM_UNKNOWN   0
#define	GM_CONTINUOUS   ( 1 << GMB_CONTINUOUS )
#define	GM_BURST_COUNT   ( 1 << GMB_BURST_COUNT )
#define	GM_GATED_PERIODS   ( 1 << GMB_GATED_PERIODS )
#define	GM_GATED   ( 1 << GMB_GATED )
#define	GM_GATED_PERIOD_START   ( 1 << GMB_GATED_PERIOD_START )
#define	GM_GATED_PERIOD_FINISH   ( 1 << GMB_GATED_PERIOD_FINISH )
#define	GM_GATED_RUN   ( 1 << GMB_GATED_RUN )
#define	GM_GATED_RUN_OUTPUT   ( 1 << GMB_GATED_RUN_OUTPUT )
#define	GM_BURST_SAMPLE_COUNT   ( 1 << GMB_BURST_SAMPLE_COUNT )
#define	GM_BURST_SAMPLE_COUNT_OUTPUT   ( 1 << GMB_BURST_SAMPLE_COUNT_OUTPUT )
#define	GM_BURST_SEGMENT_COUNT   ( 1 << GMB_BURST_SEGMENT_COUNT )
#define	GM_BURST_SEGMENT_COUNT_OUTPUT   ( 1 << GMB_BURST_SEGMENT_COUNT_OUTPUT )
#define	GMM_NONE   0
#define	GMM_BURST_COUNT   ( GM_BURST_COUNT )
#define	GMM_GATED   ( GM_GATED_PERIODS | GM_GATED | GM_GATED_PERIOD_START | GM_GATED_PERIOD_FINISH | GM_GATED_RUN | GM_GATED_RUN_OUTPUT )
#define	GMM_BURST_SAMPLE_COUNT   ( GM_BURST_SAMPLE_COUNT | GM_BURST_SAMPLE_COUNT_OUTPUT )
#define	GMM_BURST_SEGMENT_COUNT   ( GM_BURST_SEGMENT_COUNT | GM_BURST_SEGMENT_COUNT_OUTPUT )
#define	GMM_BURST   ( GMM_BURST_COUNT | GMM_BURST_SAMPLE_COUNT | GMM_BURST_SEGMENT_COUNT )
#define	GMM_REQUIRE_TRIGGER   ( GMM_GATED | GMM_BURST_SAMPLE_COUNT | GMM_BURST_SEGMENT_COUNT )
	Generator modes that require an enabeld trigger input. More...
#define	GMM_ALL   ( ( 1ULL << GMN_COUNT ) - 1 )
#define	GMM_SIGNALFREQUENCY   ( GMM_ALL & ~GMM_BURST_SAMPLE_COUNT )
	Supported generator modes when frequency mode is signal frequency. More...
#define	GMM_SAMPLEFREQUENCY   ( GMM_ALL )
	Supported generator modes when frequency mode is sample frequency. More...
#define	GMM_SINE   ( GMM_SIGNALFREQUENCY )
	Supported generator modes when signal type is sine. More...
#define	GMM_TRIANGLE   ( GMM_SIGNALFREQUENCY )
	Supported generator modes when signal type is triangle. More...
#define	GMM_SQUARE   ( GMM_SIGNALFREQUENCY )
	Supported generator modes when signal type is square. More...
#define	GMM_DC   ( GM_CONTINUOUS )
	Supported generator modes when signal type is DC. More...
#define	GMM_NOISE   ( GM_CONTINUOUS | GM_GATED )
	Supported generator modes when signal type is noise. More...
#define	GMM_ARBITRARY   ( GMM_SIGNALFREQUENCY | GMM_SAMPLEFREQUENCY )
	Supported generator modes when signal type is arbitrary. More...
#define	GMM_PULSE   ( GMM_SIGNALFREQUENCY & ~GMM_BURST_SEGMENT_COUNT )
	Supported generator modes when signal type is pulse. More...
#define	GSN_COUNT   4
	The number of generator status flags. More...
#define	GSB_STOPPED   0
#define	GSB_RUNNING   1
#define	GSB_BURSTACTIVE   2
#define	GSB_WAITING   3
#define	GS_STOPPED   ( 1 << GSB_STOPPED )
	The signal generation is stopped. More...
#define	GS_RUNNING   ( 1 << GSB_RUNNING )
	The signal generation is running. More...
#define	GS_BURSTACTIVE   ( 1 << GSB_BURSTACTIVE )
	The generator is operating in burst mode. More...
#define	GS_WAITING   ( 1 << GSB_WAITING )
	The generator is waiting for a burst to be started. More...
#define	GSM_NONE   0
#define	GSM_ALL   ( ( 1UL << GSN_COUNT ) - 1 )
#define	MMN_COUNT   2
	Number of measure modes. More...
#define	MMB_STREAM   0
	Stream mode bit number. More...
#define	MMB_BLOCK   1
	Block mode bit number. More...
#define	MMM_NONE   0
#define	MMM_ALL   ( ( 1 << MMN_COUNT ) - 1 )
#define	MM_UNKNOWN   0
	Unknown/invalid mode. More...
#define	MM_STREAM   ( 1 << MMB_STREAM )
	Stream mode. More...
#define	MM_BLOCK   ( 1 << MMB_BLOCK )
	Block mode. More...
#define	STN_COUNT   7
	Number of signal types. More...
#define	STB_SINE   0
#define	STB_TRIANGLE   1
#define	STB_SQUARE   2
#define	STB_DC   3
#define	STB_NOISE   4
#define	STB_ARBITRARY   5
#define	STB_PULSE   6
#define	ST_UNKNOWN   0
#define	ST_SINE   ( 1 << STB_SINE )
#define	ST_TRIANGLE   ( 1 << STB_TRIANGLE )
#define	ST_SQUARE   ( 1 << STB_SQUARE )
#define	ST_DC   ( 1 << STB_DC )
#define	ST_NOISE   ( 1 << STB_NOISE )
#define	ST_ARBITRARY   ( 1 << STB_ARBITRARY )
#define	ST_PULSE   ( 1 << STB_PULSE )
#define	STM_NONE   0
#define	STM_AMPLITUDE   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_NOISE | ST_ARBITRARY | ST_PULSE )
#define	STM_OFFSET   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_DC | ST_NOISE | ST_ARBITRARY | ST_PULSE )
#define	STM_FREQUENCY   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_NOISE | ST_ARBITRARY | ST_PULSE )
#define	STM_PHASE   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_ARBITRARY | ST_PULSE )
#define	STM_SYMMETRY   ( ST_SINE | ST_TRIANGLE | ST_SQUARE )
#define	STM_WIDTH   ( ST_PULSE )
#define	STM_LEADINGEDGETIME   ( ST_PULSE )
#define	STM_TRAILINGEDGETIME   ( ST_PULSE )
#define	STM_DATALENGTH   ( ST_ARBITRARY )
#define	STM_DATA   ( ST_ARBITRARY )
#define	STM_EDGETIME   ( STM_LEADINGEDGETIME & STM_TRAILINGEDGETIME )
#define	TCN_COUNT   5
	Number of trigger conditions. More...
#define	TCB_NONE   0
#define	TCB_SMALLER   1
#define	TCB_LARGER   2
#define	TCB_INSIDE   3
#define	TCB_OUTSIDE   4
#define	TC_UNKNOWN   0
#define	TC_NONE   ( 1 << TCB_NONE )
#define	TC_SMALLER   ( 1 << TCB_SMALLER )
#define	TC_LARGER   ( 1 << TCB_LARGER )
#define	TC_INSIDE   ( 1 << TCB_INSIDE )
#define	TC_OUTSIDE   ( 1 << TCB_OUTSIDE )
#define	TCM_NONE   0
	No conditions. More...
#define	TCM_ALL   ( ( 1 << TCN_COUNT ) - 1 )
	All conditions. More...
#define	TCM_ENABLED   ( TCM_ALL & ~TC_NONE )
	All conditions except TC_NONE. More...
#define	TH_ALLPRESAMPLES   0xffffffffffffffffULL
	Trigger hold off to all presamples valid More...
#define	DN_MAIN   0
	The device itself. More...
#define	DN_SUB_FIRST   1
	First sub device in a combined device. More...
#define	DN_SUB_SECOND   2
	Second sub device in a combined device. More...
#define	PGID_OSCILLOSCOPE   1
	Oscilloscope. More...
#define	PGID_GENERATOR   2
	Generator. More...
#define	PGID_EXTERNAL_DSUB   3
	External D-sub. More...
#define	SGID_MAIN   0
	The oscilloscope or function generator itself. More...
#define	SGID_CHANNEL1   1
#define	SGID_CHANNEL2   2
#define	SGID_PIN1   1
#define	SGID_PIN2   2
#define	SGID_PIN3   3
#define	FID_SCP_TRIGGERED   0
#define	FID_GEN_START   0
#define	FID_GEN_STOP   1
#define	FID_GEN_NEW_PERIOD   2
#define	FID_EXT_TRIGGERED   0
#define	TIOID_SHIFT_PGID   20
#define	TIOID_SHIFT_DN   24
#define	TIOID_SHIFT_SGID   8
#define	TIOID_SHIFT_FID   0
#define	TIID_INVALID   0
#define	TIID_EXT1   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN1 , FID_EXT_TRIGGERED )
#define	TIID_EXT2   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN2 , FID_EXT_TRIGGERED )
#define	TIID_EXT3   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN3 , FID_EXT_TRIGGERED )
#define	TIID_GENERATOR_START   TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_START )
#define	TIID_GENERATOR_STOP   TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_STOP )
#define	TIID_GENERATOR_NEW_PERIOD   TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_NEW_PERIOD )
#define	TOID_INVALID   0
#define	TOID_EXT1   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN1 , FID_EXT_TRIGGERED )
#define	TOID_EXT2   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN2 , FID_EXT_TRIGGERED )
#define	TOID_EXT3   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN3 , FID_EXT_TRIGGERED )
#define	TKN_COUNT   13
	Number of trigger kinds. More...
#define	TKB_RISINGEDGE   0
#define	TKB_FALLINGEDGE   1
#define	TKB_INWINDOW   2
#define	TKB_OUTWINDOW   3
#define	TKB_ANYEDGE   4
#define	TKB_ENTERWINDOW   5
#define	TKB_EXITWINDOW   6
#define	TKB_PULSEWIDTHPOSITIVE   7
#define	TKB_PULSEWIDTHNEGATIVE   8
#define	TKB_PULSEWIDTHEITHER   9
#define	TKB_RUNTPULSEPOSITIVE   10
#define	TKB_RUNTPULSENEGATIVE   11
#define	TKB_RUNTPULSEEITHER   12
#define	TK_UNKNOWN   0
	Unknown/invalid trigger kind. More...
#define	TK_RISINGEDGE   ( 1ULL << TKB_RISINGEDGE )
	Rising edge. More...
#define	TK_FALLINGEDGE   ( 1ULL << TKB_FALLINGEDGE )
	Falling edge. More...
#define	TK_INWINDOW   ( 1ULL << TKB_INWINDOW )
	Inside window. More...
#define	TK_OUTWINDOW   ( 1ULL << TKB_OUTWINDOW )
	Outside window. More...
#define	TK_ANYEDGE   ( 1ULL << TKB_ANYEDGE )
	Any edge. More...
#define	TK_ENTERWINDOW   ( 1ULL << TKB_ENTERWINDOW )
	Enter window. More...
#define	TK_EXITWINDOW   ( 1ULL << TKB_EXITWINDOW )
	Exit window. More...
#define	TK_PULSEWIDTHPOSITIVE   ( 1ULL << TKB_PULSEWIDTHPOSITIVE )
	Positive pulse width. More...
#define	TK_PULSEWIDTHNEGATIVE   ( 1ULL << TKB_PULSEWIDTHNEGATIVE )
	Negative pulse width. More...
#define	TK_PULSEWIDTHEITHER   ( 1ULL << TKB_PULSEWIDTHEITHER )
	Positive or negative pulse width. More...
#define	TK_RUNTPULSEPOSITIVE   ( 1ULL << TKB_RUNTPULSEPOSITIVE )
	Positive runt pulse. More...
#define	TK_RUNTPULSENEGATIVE   ( 1ULL << TKB_RUNTPULSENEGATIVE )
	Negative runt pulse. More...
#define	TK_RUNTPULSEEITHER   ( 1ULL << TKB_RUNTPULSEEITHER )
	Positive or negative runt pulse. More...
#define	TKM_NONE   0
	No trigger kinds. More...
#define	TKM_EDGE   ( TK_RISINGEDGE | TK_FALLINGEDGE | TK_ANYEDGE )
	All edge triggers. More...
#define	TKM_WINDOW   ( TK_INWINDOW | TK_OUTWINDOW | TK_ENTERWINDOW | TK_EXITWINDOW )
	All window triggers. More...
#define	TKM_PULSEWIDTH   ( TK_PULSEWIDTHPOSITIVE | TK_PULSEWIDTHNEGATIVE | TK_PULSEWIDTHEITHER )
	All pulse width triggers. More...
#define	TKM_RUNTPULSE   ( TK_RUNTPULSEPOSITIVE | TK_RUNTPULSENEGATIVE | TK_RUNTPULSEEITHER )
	All runt pulse triggers. More...
#define	TKM_PULSE   ( TKM_PULSEWIDTH | TKM_RUNTPULSE )
	All pulse triggers. More...
#define	TKM_TIME   ( TKM_PULSEWIDTH | TKM_WINDOW )
	All trigger kinds that may have a time property. More...
#define	TKM_ALL   ( ( 1ULL << TKN_COUNT ) - 1 )
	All trigger kinds. More...
#define	TLMN_COUNT   2
	Number of trigger level modes. More...
#define	TLMB_RELATIVE   0
#define	TLMB_ABSOLUTE   1
#define	TLM_UNKNOWN   0
#define	TLM_RELATIVE   ( 1 << TLMB_RELATIVE )
#define	TLM_ABSOLUTE   ( 1 << TLMB_ABSOLUTE )
#define	TLMM_NONE   0
#define	TLMM_ALL   ( ( 1 << TLMN_COUNT ) - 1 )
#define	TO_INFINITY   -1
	No time out. More...
#define	TOEN_COUNT   6
	Number of trigger output events. More...
#define	TOEB_GENERATOR_START   0
#define	TOEB_GENERATOR_STOP   1
#define	TOEB_GENERATOR_NEWPERIOD   2
#define	TOEB_OSCILLOSCOPE_RUNNING   3
#define	TOEB_OSCILLOSCOPE_TRIGGERED   4
#define	TOEB_MANUAL   5
#define	TOE_UNKNOWN   0
#define	TOE_GENERATOR_START   ( 1 << TOEB_GENERATOR_START )
#define	TOE_GENERATOR_STOP   ( 1 << TOEB_GENERATOR_STOP )
#define	TOE_GENERATOR_NEWPERIOD   ( 1 << TOEB_GENERATOR_NEWPERIOD )
#define	TOE_OSCILLOSCOPE_RUNNING   ( 1 << TOEB_OSCILLOSCOPE_RUNNING )
#define	TOE_OSCILLOSCOPE_TRIGGERED   ( 1 << TOEB_OSCILLOSCOPE_TRIGGERED )
#define	TOE_MANUAL   ( 1 << TOEB_MANUAL )
#define	TOEM_NONE   0
	No trigger output events. More...
#define	TOEM_GENERATOR   ( TOE_GENERATOR_START | TOE_GENERATOR_STOP | TOE_GENERATOR_NEWPERIOD )
	All generator trigger output events. More...
#define	TOEM_OSCILLOSCOPE   ( TOE_OSCILLOSCOPE_RUNNING | TOE_OSCILLOSCOPE_TRIGGERED )
	All oscilloscope trigger output events. More...
#define	TOEM_ALL   ( ( 1ULL << TOEN_COUNT ) - 1 )
	All trigger output events. More...
#define	PID_NONE   0
	Unknown/invalid ID. More...
#define	PID_COMBI   2
	Combined instrument. More...
#define	PID_HS3   13
	Handyscope HS3. More...
#define	PID_HS4   15
	Handyscope HS4. More...
#define	PID_HP3   18
	Handyprobe HP3. More...
#define	PID_TP450   19
	TP450. More...
#define	PID_HS4D   20
	Handyscope HS4-DIFF. More...
#define	PID_HS5   22
	Handyscope HS5. More...
#define	PID_HS6D   25
	Handyscope HS6 DIFF. More...
#define	PID_ATS610004D   31
	ATS610004D. More...
#define	PID_ATS605004D   32
	ATS605004D. More...
#define	LIBTIEPIE_EVENTID_INVALID   0
	This event ID value should not occur. More...
#define	LIBTIEPIE_EVENTID_OBJ_REMOVED   1
	Event ID for the event indicating that an object was removed. More...
#define	LIBTIEPIE_EVENTID_SCP_DATAREADY   2
	Event ID for the event indicating that the oscilloscope measurement is ready. More...
#define	LIBTIEPIE_EVENTID_SCP_DATAOVERFLOW   3
	Event ID for the event indicating that the data overflow occurred during a streaming measurement. More...
#define	LIBTIEPIE_EVENTID_SCP_CONNECTIONTESTCOMPLETED   4
	Event ID for the event indicating that the connection test is ready. More...
#define	LIBTIEPIE_EVENTID_SCP_TRIGGERED   5
	Event ID for the event indicating that the oscilloscope has triggered. More...
#define	LIBTIEPIE_EVENTID_GEN_BURSTCOMPLETED   6
	Event ID for the event indicating that the generator burst is completed. More...
#define	LIBTIEPIE_EVENTID_GEN_CONTROLLABLECHANGED   7
	Event ID for the event indicating that the generator controllable state has changed. More...
#define	LIBTIEPIE_EVENTID_SRV_STATUSCHANGED   8
	XXX. More...
#define	LIBTIEPIE_EVENTID_SCP_SAFEGROUNDERROR   9
	Event ID for the event indicating that the oscilloscope channel SafeGround was disabled because of a too large ground current. The value parameter of the event contains the channel number (0 to ChannelCount-1). More...
#define	TPVERSION_MAJOR(x)   ( x >> 48 )
	Extract the major number from a TpVersion_t value. More...
#define	TPVERSION_MINOR(x)   ( ( x >> 32 ) & 0xffff )
	Extract the minor number from a TpVersion_t value. More...
#define	TPVERSION_RELEASE(x)   ( ( x >> 16 ) & 0xffff )
	Extract the release number from a TpVersion_t value. More...
#define	TPVERSION_BUILD(x)   ( x & 0xffff )
	Extract the build number from a TpVersion_t value. More...
#define	TPDATE_YEAR(x)   ( x >> 16 )
	Extract year from a TpDate_t value. More...
#define	TPDATE_MONTH(x)   ( ( x >> 8 ) & 0xff )
	Extract month from a TpDate_t value. More...
#define	TPDATE_DAY(x)   ( x & 0xff )
	Extract day from a TpDate_t value. More...
#define	TRIGGER_IO_ID(pgid, sgid, fid)   ( ( DN_MAIN << TIOID_SHIFT_DN ) | ( ( pgid ) << TIOID_SHIFT_PGID ) | ( ( sgid ) << TIOID_SHIFT_SGID ) | ( ( fid ) << TIOID_SHIFT_FID ) )
#define	COMBI_TRIGGER_IO_ID(dn, tiid)   ( ( ( dn ) << TIOID_SHIFT_DN ) | ( ( tiid ) & ( ( 1 << TIOID_SHIFT_DN ) - 1 ) ) )
#define	WM_LIBTIEPIE   ( WM_USER + 1337 )
	Message number offset used by LibTiePie. More...
#define	WM_LIBTIEPIE_LST_DEVICEADDED   ( WM_LIBTIEPIE + 2 )
#define	WM_LIBTIEPIE_LST_DEVICEREMOVED   ( WM_LIBTIEPIE + 3 )
#define	WM_LIBTIEPIE_LST_DEVICECANOPENCHANGED   ( WM_LIBTIEPIE + 9 )
#define	WM_LIBTIEPIE_DEV_REMOVED   ( WM_LIBTIEPIE + 4 )
#define	WM_LIBTIEPIE_SCP_DATAREADY   ( WM_LIBTIEPIE + 0 )
#define	WM_LIBTIEPIE_SCP_DATAOVERFLOW   ( WM_LIBTIEPIE + 1 )
#define	WM_LIBTIEPIE_SCP_CONNECTIONTESTCOMPLETED   ( WM_LIBTIEPIE + 7 )
#define	WM_LIBTIEPIE_SCP_TRIGGERED   ( WM_LIBTIEPIE + 8 )
#define	WM_LIBTIEPIE_GEN_BURSTCOMPLETED   ( WM_LIBTIEPIE + 5 )
#define	WM_LIBTIEPIE_GEN_CONTROLLABLECHANGED   ( WM_LIBTIEPIE + 6 )
#define	WM_LIBTIEPIE_EVENT   ( WM_LIBTIEPIE + 10 )

Typedefs
typedef int32_t	LibTiePieStatus_t
	LibTiePie status code. More...
typedef uint32_t	LibTiePieHandle_t
	Generic handle. More...
typedef LibTiePieHandle_t	TpDeviceHandle_t
typedef uint64_t	TpVersion_t
	Data type representing a version number. More...
typedef uint32_t	TpDate_t
	Data type representing a date. More...
typedef uint8_t	bool8_t
	Boolean value one byte wide. More...
typedef uint8_t	LibTiePieTriState_t
	TriState value one byte wide. More...
typedef void **	LibTiePiePointerArray_t
	Pointer array. More...
typedef void(*	TpCallback_t) (void *pData)
typedef void(*	TpCallbackDeviceList_t) (void *pData, uint32_t dwDeviceTypes, uint32_t dwSerialNumber)
typedef void(*	TpCallbackHandle_t) (void *pData, LibTiePieHandle_t hHandle)
typedef void(*	TpCallbackEvent_t) (void *pData, uint32_t dwEvent, uint32_t dwValue)

Functions
void	LibInit (void)
	Create and initialize internal resources used by the library. More...
bool8_t	LibIsInitialized (void)
	Check whether the library's internal resources are initialized. More...
void	LibExit (void)
	Clear and free internal resources used by the library. More...
TpVersion_t	LibGetVersion (void)
	Get the library version number. More...
const char *	LibGetVersionExtra (void)
	Get the library version postfix. More...
uint32_t	LibGetConfig (uint8_t *pBuffer, uint32_t dwBufferLength)
	Get the library configuration number. More...
LibTiePieStatus_t	LibGetLastStatus (void)
	Get the last status value. More...
const char *	LibGetLastStatusStr (void)
	Get the last status value as text. More...
void	LstUpdate (void)
	Update the device list. More...
uint32_t	LstGetCount (void)
	Get the number of devices in the device list. More...
LibTiePieHandle_t	LstOpenDevice (uint32_t dwIdKind, uint32_t dwId, uint32_t dwDeviceType)
	Open a device and get a handle to the device. More...
LibTiePieHandle_t	LstOpenOscilloscope (uint32_t dwIdKind, uint32_t dwId)
	Open an oscilloscope and get a handle to the oscilloscope. More...
LibTiePieHandle_t	LstOpenGenerator (uint32_t dwIdKind, uint32_t dwId)
	Open a generator and get a handle to the generator. More...
LibTiePieHandle_t	LstOpenI2CHost (uint32_t dwIdKind, uint32_t dwId)
	Open an I2C host and get a handle to the I2C host. More...
uint32_t	LstCreateCombinedDevice (const LibTiePieHandle_t *pDeviceHandles, uint32_t dwCount)
	Create a combined instrument. More...
LibTiePieHandle_t	LstCreateAndOpenCombinedDevice (const LibTiePieHandle_t *pDeviceHandles, uint32_t dwCount)
	Create and open a combined instrument. More...
void	LstRemoveDevice (uint32_t dwSerialNumber)
	Remove an instrument from the device list so it can be used by other applications. More...
bool8_t	LstDevCanOpen (uint32_t dwIdKind, uint32_t dwId, uint32_t dwDeviceType)
	Check whether the listed device can be opened. More...
uint32_t	LstDevGetProductId (uint32_t dwIdKind, uint32_t dwId)
	Get the product id of the listed device. More...
uint32_t	LstDevGetName (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength)
	Get the full name of the listed device. More...
uint32_t	LstDevGetNameShort (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength)
	Get the short name of the listed device. More...
uint32_t	LstDevGetNameShortest (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength)
	Get the short name of the listed device wihout model postfix. More...
TpVersion_t	LstDevGetDriverVersion (uint32_t dwIdKind, uint32_t dwId)
	Get the version number of the driver currently used by the listed device. More...
TpVersion_t	LstDevGetRecommendedDriverVersion (uint32_t dwIdKind, uint32_t dwId)
	Get the version number of the recommended driver for the listed device. More...
TpVersion_t	LstDevGetFirmwareVersion (uint32_t dwIdKind, uint32_t dwId)
	Get the version number of the firmware currently used by the listed device. More...
TpDate_t	LstDevGetCalibrationDate (uint32_t dwIdKind, uint32_t dwId)
	Get the calibration date of the listed device. More...
uint32_t	LstDevGetSerialNumber (uint32_t dwIdKind, uint32_t dwId)
	Get the serial number of the listed device. More...
uint32_t	LstDevGetTypes (uint32_t dwIdKind, uint32_t dwId)
	Get the device types of the listed device. More...
uint32_t	LstDevGetContainedSerialNumbers (uint32_t dwIdKind, uint32_t dwId, uint32_t *pBuffer, uint32_t dwBufferLength)
	Get the serial numbers of the individual devices contained in a combined device. More...
uint32_t	LstCbDevGetProductId (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
	Get the product id of a device contained in a combined device. More...
uint32_t	LstCbDevGetName (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength)
	Get the full name of a device contained in a combined device. More...
uint32_t	LstCbDevGetNameShort (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength)
	Get the short name of a device contained in a combined device. More...
uint32_t	LstCbDevGetNameShortest (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength)
	Get the short name without model postfix of a device contained in a combined device. More...
TpVersion_t	LstCbDevGetDriverVersion (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
	Get the driver version of a device contained in a combined device. More...
TpVersion_t	LstCbDevGetFirmwareVersion (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
	Get the firmware version of a device contained in a combined device. More...
TpDate_t	LstCbDevGetCalibrationDate (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
	Get the calibration date of a device contained in a combined device. More...
uint16_t	LstCbScpGetChannelCount (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
	Get the channel count of an oscilloscope contained in a combined oscilloscope. More...
void	LstSetCallbackDeviceAdded (TpCallbackDeviceList_t pCallback, void *pData)
	Set a callback function which is called when a device is added to the device list. More...
void	LstSetCallbackDeviceRemoved (TpCallbackDeviceList_t pCallback, void *pData)
	Set a callback function which is called when a device is removed from the device list. More...
void	LstSetCallbackDeviceCanOpenChanged (TpCallbackDeviceList_t pCallback, void *pData)
	Set a callback function which is called when the device can open property changes. More...
void	LstSetEventDeviceAdded (int fdEvent)
	Set an event file descriptor which is set when a device is added to the device list. More...
void	LstSetEventDeviceRemoved (int fdEvent)
	Set an event file descriptor which is set when a device is removed from the device list. More...
void	LstSetEventDeviceCanOpenChanged (int fdEvent)
	Set an event file descriptor which is set when the device can open property changes. More...
void	LstSetEventDeviceAdded (HANDLE hEvent)
	Set an event object handle which is set when a device is added to the device list. More...
void	LstSetEventDeviceRemoved (HANDLE hEvent)
	Set an event object handle which is set when a device is removed from the device list. More...
void	LstSetEventDeviceCanOpenChanged (HANDLE hEvent)
	Set an event object handle which is set when the device can open property changes. More...
void	LstSetMessageDeviceAdded (HWND hWnd)
	Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEADDED message is sent when a device is added to the device list. More...
void	LstSetMessageDeviceRemoved (HWND hWnd)
	Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEREMOVED message is sent when a device is removed from the device list. More...
void	LstSetMessageDeviceCanOpenChanged (HWND hWnd)
	Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEREMOVED message is sent when the device can open property changes. More...
void	ObjClose (LibTiePieHandle_t hHandle)
	Close a object. More...
bool8_t	ObjIsRemoved (LibTiePieHandle_t hHandle)
	Check whether an object is removed. More...
uint64_t	ObjGetInterfaces (LibTiePieHandle_t hHandle)
	Check which interface are supported by the specified object. More...
void	ObjSetEventCallback (LibTiePieHandle_t hHandle, TpCallbackEvent_t pCallback, void *pData)
	Set a callback function which is called when an event occurs. More...
bool8_t	ObjGetEvent (LibTiePieHandle_t hHandle, uint32_t *pEvent, uint32_t *pValue)
	Get an event form the event queue. More...
void	ObjSetEventEvent (LibTiePieHandle_t hHandle, int fdEvent)
	Set an event file descriptor which is set when an event occurs. More...
void	ObjSetEventEvent (LibTiePieHandle_t hHandle, HANDLE hEvent)
	Set an event object handle which is set when an event occurs. More...
void	ObjSetEventWindowHandle (LibTiePieHandle_t hHandle, HWND hWnd)
	Set a window handle to which a WM_LIBTIEPIE_EVENT message is sent when an event occurs. More...
void	DevClose (LibTiePieHandle_t hDevice)
	Close a device. More...
bool8_t	DevIsRemoved (LibTiePieHandle_t hDevice)
	Check whether a device is removed. More...
TpVersion_t	DevGetDriverVersion (LibTiePieHandle_t hDevice)
	Get the version number of the driver used by the device. More...
TpVersion_t	DevGetFirmwareVersion (LibTiePieHandle_t hDevice)
	Get the version number of the firmware used by the device. More...
TpDate_t	DevGetCalibrationDate (LibTiePieHandle_t hDevice)
	Get the calibration date of the device. More...
uint32_t	DevGetSerialNumber (LibTiePieHandle_t hDevice)
	Get the serial number of the device. More...
uint32_t	DevGetProductId (LibTiePieHandle_t hDevice)
	Get the product id of the device. More...
uint32_t	DevGetType (LibTiePieHandle_t hDevice)
	Get the device type. More...
uint32_t	DevGetName (LibTiePieHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength)
	Get the full name of the device. More...
uint32_t	DevGetNameShort (LibTiePieHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength)
	Get the short name of the device. More...
uint32_t	DevGetNameShortest (LibTiePieHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength)
	Get the short name of the device without model postfix. More...
void	DevSetCallbackRemoved (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
	Set a callback function which is called when the device is removed. More...
void	DevSetEventRemoved (LibTiePieHandle_t hDevice, int fdEvent)
	Set an event file descriptor which is set when the device is removed. More...
void	DevSetEventRemoved (LibTiePieHandle_t hDevice, HANDLE hEvent)
	Set an event object handle which is set when the device is removed. More...
void	DevSetMessageRemoved (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
	Set a window handle to which a WM_LIBTIEPIE_DEV_REMOVED message is sent when the device is removed. More...
uint16_t	DevTrGetInputCount (LibTiePieHandle_t hDevice)
	Get the number of trigger inputs. More...
uint16_t	DevTrGetInputIndexById (LibTiePieHandle_t hDevice, uint32_t dwId)
	Get the index of a trigger input identified by its ID. More...
bool8_t	ScpTrInIsTriggered (LibTiePieHandle_t hDevice, uint16_t wInput)
	Check whether the trigger input caused a trigger. More...
bool8_t	DevTrInGetEnabled (LibTiePieHandle_t hDevice, uint16_t wInput)
	Check whether a device trigger input is enabled. More...
bool8_t	DevTrInSetEnabled (LibTiePieHandle_t hDevice, uint16_t wInput, bool8_t bEnable)
	To select a device trigger input as trigger source, set trigger input enabled. More...
uint64_t	DevTrInGetKinds (LibTiePieHandle_t hDevice, uint16_t wInput)
	Get the supported trigger kinds for a specified device trigger input. More...
uint64_t	DevTrInGetKind (LibTiePieHandle_t hDevice, uint16_t wInput)
	Get the currently selected trigger kind for a specified device trigger input. More...
uint64_t	DevTrInSetKind (LibTiePieHandle_t hDevice, uint16_t wInput, uint64_t qwKind)
	Set the required trigger kind for a specified device trigger input. More...
bool8_t	DevTrInIsAvailable (LibTiePieHandle_t hDevice, uint16_t wInput)
	Check whether a device trigger input is available. More...
uint32_t	DevTrInGetId (LibTiePieHandle_t hDevice, uint16_t wInput)
	Get the id of a specified device trigger input. More...
uint32_t	DevTrInGetName (LibTiePieHandle_t hDevice, uint16_t wInput, char *pBuffer, uint32_t dwBufferLength)
	Get the name of a specified device trigger input. More...
uint16_t	DevTrGetOutputCount (LibTiePieHandle_t hDevice)
	Get the number of trigger outputs. More...
uint16_t	DevTrGetOutputIndexById (LibTiePieHandle_t hDevice, uint32_t dwId)
	Get the index of trigger output identified by its ID. More...
bool8_t	DevTrOutGetEnabled (LibTiePieHandle_t hDevice, uint16_t wOutput)
	Check whether a trigger output is enabled. More...
bool8_t	DevTrOutSetEnabled (LibTiePieHandle_t hDevice, uint16_t wOutput, bool8_t bEnable)
	Set trigger output enable. More...
uint64_t	DevTrOutGetEvents (LibTiePieHandle_t hDevice, uint16_t wOutput)
	Get the supported trigger output events for a specified device trigger output. More...
uint64_t	DevTrOutGetEvent (LibTiePieHandle_t hDevice, uint16_t wOutput)
	Get the currently selected trigger output event for a specified device trigger output. More...
uint64_t	DevTrOutSetEvent (LibTiePieHandle_t hDevice, uint16_t wOutput, uint64_t qwEvent)
	Set the trigger output event for a specified device trigger output. More...
uint32_t	DevTrOutGetId (LibTiePieHandle_t hDevice, uint16_t wOutput)
	Get the id of a specified device trigger output. More...
uint32_t	DevTrOutGetName (LibTiePieHandle_t hDevice, uint16_t wOutput, char *pBuffer, uint32_t dwBufferLength)
	Get the name of a specified device trigger output. More...
bool8_t	DevTrOutTrigger (LibTiePieHandle_t hDevice, uint16_t wOutput)
	Trigger the specified device trigger output. More...
uint16_t	ScpGetChannelCount (LibTiePieHandle_t hDevice)
	Get the number of channels. More...
bool8_t	ScpChIsAvailable (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether the channel is available. More...
uint32_t	ScpChGetConnectorType (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the channel connector type. More...
bool8_t	ScpChIsDifferential (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether the channel has a differential input. More...
double	ScpChGetImpedance (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the channel input impedance. More...
uint32_t	ScpChGetBandwidths (LibTiePieHandle_t hDevice, uint16_t wCh, double *pList, uint32_t dwLength)
	Get the supported input bandwidths for a specified channel. More...
double	ScpChGetBandwidth (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the current channel input bandwidth. More...
double	ScpChSetBandwidth (LibTiePieHandle_t hDevice, uint16_t wCh, double dBandwidth)
	Set the channel input bandwidth. More...
uint64_t	ScpChGetCouplings (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the supported coupling kinds of a specified channel. More...
uint64_t	ScpChGetCoupling (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the currently set coupling of a specified channel. More...
uint64_t	ScpChSetCoupling (LibTiePieHandle_t hDevice, uint16_t wCh, uint64_t qwCoupling)
	Set the coupling of a specified channel. More...
bool8_t	ScpChGetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether a specified channel is currently enabled. More...
bool8_t	ScpChSetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
	Set channel enable. More...
double	ScpChGetProbeGain (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the currently set channel probe gain for a specified channel. More...
double	ScpChSetProbeGain (LibTiePieHandle_t hDevice, uint16_t wCh, double dProbeGain)
	Set the channel probe gain for a specified channel. More...
double	ScpChGetProbeOffset (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the currently set channel probe offset for a specified channel. More...
double	ScpChSetProbeOffset (LibTiePieHandle_t hDevice, uint16_t wCh, double dProbeOffset)
	Set the channel probe offset for a specified channel. More...
bool8_t	ScpChGetAutoRanging (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether auto ranging is enabled for a specified channel. More...
bool8_t	ScpChSetAutoRanging (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
	Set auto ranging for a specified channel. More...
uint32_t	ScpChGetRanges (LibTiePieHandle_t hDevice, uint16_t wCh, double *pList, uint32_t dwLength)
	Get the supported input ranges for a specified channel, with the currently selected coupling. More...
double	ScpChGetRange (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the currently selected input range for a specified channel. More...
double	ScpChSetRange (LibTiePieHandle_t hDevice, uint16_t wCh, double dRange)
	Set the input range for a specified channel. More...
bool8_t	ScpChHasSafeGround (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether the specified channel has SafeGround. More...
bool8_t	ScpChGetSafeGroundEnabled (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether SafeGround is enabled for a specified channel. More...
bool8_t	ScpChSetSafeGroundEnabled (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
	Enable or disable SafeGround for a specified channel. More...
double	ScpChGetSafeGroundThresholdMin (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the minimum SafeGround threshold current for the specified channel. More...
double	ScpChGetSafeGroundThresholdMax (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the maximum SafeGround threshold current for the specified channel. More...
double	ScpChGetSafeGroundThreshold (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the actual SafeGround threshold current for the specified channel. More...
double	ScpChSetSafeGroundThreshold (LibTiePieHandle_t hDevice, uint16_t wCh, double dThreshold)
	Set the SafeGround threshold current for the specified channel. More...
bool8_t	ScpChHasTrigger (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether the specified channel has trigger support with the currently selected measure mode. More...
bool8_t	ScpChTrIsAvailable (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether the channel trigger for the specified channel is available, with the current oscilloscope settings. More...
bool8_t	ScpChTrIsTriggered (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether the channel trigger caused a trigger. More...
bool8_t	ScpChTrGetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether channel trigger for a specified channel is enabled. More...
bool8_t	ScpChTrSetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
	To select a channel as trigger source, set channel trigger enable. More...
uint64_t	ScpChTrGetKinds (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the supported channel trigger kinds for a specified channel with the currently selected measure mode. More...
uint64_t	ScpChTrGetKind (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the currently selected channel trigger kind for a specified channel. More...
uint64_t	ScpChTrSetKind (LibTiePieHandle_t hDevice, uint16_t wCh, uint64_t qwTriggerKind)
	Set the channel trigger kind for a specified channel. More...
uint32_t	ScpChTrGetLevelModes (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the supported trigger level modes of a specified channel. More...
uint32_t	ScpChTrGetLevelMode (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the current trigger level mode of a specified channel. More...
uint32_t	ScpChTrSetLevelMode (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwLevelMode)
	Set the trigger level mode of a specified channel. More...
uint32_t	ScpChTrGetLevelCount (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the number of channel trigger levels for a specified channel with the currently selected trigger kind. More...
double	ScpChTrGetLevel (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex)
	Get the currently set channel trigger level value for a specified channel and trigger level. More...
double	ScpChTrSetLevel (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dLevel)
	Set the channel trigger level value for a specified channel and trigger level. More...
uint32_t	ScpChTrGetHysteresisCount (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the number of trigger hystereses for a specified channel with the currently selected trigger kind. More...
double	ScpChTrGetHysteresis (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex)
	Get the currently set channel trigger hysteresis value for a specified channel and trigger hysteresis. More...
double	ScpChTrSetHysteresis (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dHysteresis)
	Set the channel trigger hysteresis value for a specified channel and trigger hysteresis. More...
uint32_t	ScpChTrGetConditions (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the supported trigger conditions for a specified channel with the currently selected trigger kind. More...
uint32_t	ScpChTrGetCondition (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the current selected trigger condition for a specified channel. More...
uint32_t	ScpChTrSetCondition (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwCondition)
	Set the trigger condition for a specified channel. More...
uint32_t	ScpChTrGetTimeCount (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the number of trigger times for the current trigger kind and trigger condition. More...
double	ScpChTrGetTime (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex)
	Get the current trigger time value for a specified channel and trigger type. More...
double	ScpChTrSetTime (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dTime)
	Set the required trigger time value for a specified channel and trigger type. More...
uint64_t	ScpGetData (LibTiePieHandle_t hDevice, float **pBuffers, uint16_t wChannelCount, uint64_t qwStartIndex, uint64_t qwSampleCount)
	Get the measurement data for specified channels. More...
uint64_t	ScpGetData1Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, uint64_t qwStartIndex, uint64_t qwSampleCount)
	Get the measurement data for the first channel. More...
uint64_t	ScpGetData2Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, uint64_t qwStartIndex, uint64_t qwSampleCount)
	Get the measurement data for the first two channels. More...
uint64_t	ScpGetData3Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, float *pBufferCh3, uint64_t qwStartIndex, uint64_t qwSampleCount)
	Get the measurement data for the first three channels. More...
uint64_t	ScpGetData4Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, float *pBufferCh3, float *pBufferCh4, uint64_t qwStartIndex, uint64_t qwSampleCount)
	Get the measurement data for the first four channels. More...
uint64_t	ScpGetValidPreSampleCount (LibTiePieHandle_t hDevice)
	Get the number of valid pre samples in the measurement. More...
void	ScpChGetDataValueRange (LibTiePieHandle_t hDevice, uint16_t wCh, double *pMin, double *pMax)
	Get the minimum and maximum values of the input range the current data was measured with. More...
double	ScpChGetDataValueMin (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the minimum value of the input range the current data was measured with. More...
double	ScpChGetDataValueMax (LibTiePieHandle_t hDevice, uint16_t wCh)
	Get the maximum value of the input range the current data was measured with. More...
void	ScpSetCallbackDataReady (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
	Set a callback function which is called when the oscilloscope has new measurement data ready. More...
void	ScpSetCallbackDataOverflow (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
	Set a callback function which is called when the oscilloscope streaming measurement caused an data overflow. More...
void	ScpSetCallbackConnectionTestCompleted (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
	Set a callback function which is called when the oscilloscope connection test is completed. More...
void	ScpSetCallbackTriggered (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
	Set a callback function which is called when the oscilloscope is triggered. More...
void	ScpSetEventDataReady (LibTiePieHandle_t hDevice, int fdEvent)
	Set an event file descriptor which is set when the oscilloscope has new measurement data ready. More...
void	ScpSetEventDataOverflow (LibTiePieHandle_t hDevice, int fdEvent)
	Set an event file descriptor which is set when the oscilloscope streaming measurement caused an data overflow. More...
void	ScpSetEventConnectionTestCompleted (LibTiePieHandle_t hDevice, int fdEvent)
	Set an event file descriptor which is set when the oscilloscope connection test is completed. More...
void	ScpSetEventTriggered (LibTiePieHandle_t hDevice, int fdEvent)
	Set an event file descriptor which is set when the oscilloscope is triggered. More...
void	ScpSetEventDataReady (LibTiePieHandle_t hDevice, HANDLE hEvent)
	Set an event object handle which is set when the oscilloscope has new measurement data ready. More...
void	ScpSetEventDataOverflow (LibTiePieHandle_t hDevice, HANDLE hEvent)
	Set an event object handle which is set when the oscilloscope streaming measurement caused an data overflow. More...
void	ScpSetEventConnectionTestCompleted (LibTiePieHandle_t hDevice, HANDLE hEvent)
	Set an event object handle which is set when the oscilloscope connection test is completed. More...
void	ScpSetEventTriggered (LibTiePieHandle_t hDevice, HANDLE hEvent)
	Set an event object handle which is set when the oscilloscope is triggered. More...
void	ScpSetMessageDataReady (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
	Set a window handle to which a WM_LIBTIEPIE_SCP_DATAREADY message is sent when the oscilloscope has new measurement data ready. More...
void	ScpSetMessageDataOverflow (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
	Set a window handle to which a WM_LIBTIEPIE_SCP_DATAOVERFLOW message is sent when the oscilloscope streaming measurement caused an data overflow. More...
void	ScpSetMessageConnectionTestCompleted (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
	Set a window handle to which a WM_LIBTIEPIE_SCP_CONNECTIONTESTCOMPLETED message is sent when the oscilloscope connection test is completed. More...
void	ScpSetMessageTriggered (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
	Set a window handle to which a WM_LIBTIEPIE_SCP_TRIGGERED message is sent when the oscilloscope is triggered. More...
bool8_t	ScpStart (LibTiePieHandle_t hDevice)
	Start a single measurement. More...
bool8_t	ScpStop (LibTiePieHandle_t hDevice)
	Stop a running measurement. More...
bool8_t	ScpForceTrigger (LibTiePieHandle_t hDevice)
	Force a trigger. More...
uint32_t	ScpGetMeasureModes (LibTiePieHandle_t hDevice)
	Get the supported measure modes for a specified oscilloscope. More...
uint32_t	ScpGetMeasureMode (LibTiePieHandle_t hDevice)
	Get the current measure mode. More...
uint32_t	ScpSetMeasureMode (LibTiePieHandle_t hDevice, uint32_t dwMeasureMode)
	Set the measure mode. More...
bool8_t	ScpIsRunning (LibTiePieHandle_t hDevice)
	Check whether the oscilloscope is currently measuring. More...
bool8_t	ScpIsTriggered (LibTiePieHandle_t hDevice)
	Check whether the oscilloscope has triggered. More...
bool8_t	ScpIsTimeOutTriggered (LibTiePieHandle_t hDevice)
	Check whether the trigger was caused by the trigger time out. More...
bool8_t	ScpIsForceTriggered (LibTiePieHandle_t hDevice)
	Check whether the trigger was caused by ScpForceTrigger. More...
bool8_t	ScpIsDataReady (LibTiePieHandle_t hDevice)
	Check whether new, unread measured data is available. More...
bool8_t	ScpIsDataOverflow (LibTiePieHandle_t hDevice)
	Check whether a data overflow has occurred. More...
uint32_t	ScpGetAutoResolutionModes (LibTiePieHandle_t hDevice)
	Get the supported auto resolution modes of the specified oscilloscope. More...
uint32_t	ScpGetAutoResolutionMode (LibTiePieHandle_t hDevice)
	Get the current auto resolution mode of the specified oscilloscope. More...
uint32_t	ScpSetAutoResolutionMode (LibTiePieHandle_t hDevice, uint32_t dwAutoResolutionMode)
	Set the auto resolution mode of the specified oscilloscope. More...
uint32_t	ScpGetResolutions (LibTiePieHandle_t hDevice, uint8_t *pList, uint32_t dwLength)
	Get an array with the supported resolutions of the specified oscilloscope. More...
uint8_t	ScpGetResolution (LibTiePieHandle_t hDevice)
	Get the current resolution of the specified oscilloscope. More...
uint8_t	ScpSetResolution (LibTiePieHandle_t hDevice, uint8_t byResolution)
	Set the resolution of the specified oscilloscope. More...
bool8_t	ScpIsResolutionEnhanced (LibTiePieHandle_t hDevice)
	Check whether the currently selected resolution is enhanced or a native resolution of the hardware. More...
uint32_t	ScpGetClockSources (LibTiePieHandle_t hDevice)
	Get the supported clock sources of the specified oscilloscope. More...
uint32_t	ScpGetClockSource (LibTiePieHandle_t hDevice)
	Get the currently selected clock source of the specified oscilloscope. More...
uint32_t	ScpSetClockSource (LibTiePieHandle_t hDevice, uint32_t dwClockSource)
	Set the clock source of the specified oscilloscope. More...
uint32_t	ScpGetClockSourceFrequencies (LibTiePieHandle_t hDevice, double *pList, uint32_t dwLength)
	Get an array with the supported clock source frequencies of the specified oscilloscope. More...
double	ScpGetClockSourceFrequency (LibTiePieHandle_t hDevice)
	Get the current clock source frequency of the specified oscilloscope. More...
double	ScpSetClockSourceFrequency (LibTiePieHandle_t hDevice, double dClockSourceFrequency)
	Set the clock source frequency of the specified oscilloscope. More...
uint32_t	ScpGetClockOutputs (LibTiePieHandle_t hDevice)
	Get the supported clock outputs of the specified oscilloscope. More...
uint32_t	ScpGetClockOutput (LibTiePieHandle_t hDevice)
	Get the currently selected clock output of the specified oscilloscope. More...
uint32_t	ScpSetClockOutput (LibTiePieHandle_t hDevice, uint32_t dwClockOutput)
	Set the clock output of the specified oscilloscope. More...
uint32_t	ScpGetClockOutputFrequencies (LibTiePieHandle_t hDevice, double *pList, uint32_t dwLength)
	Get an array with the supported clock output frequencies of the specified oscilloscope. More...
double	ScpGetClockOutputFrequency (LibTiePieHandle_t hDevice)
	Get the current clock output frequency of the specified oscilloscope. More...
double	ScpSetClockOutputFrequency (LibTiePieHandle_t hDevice, double dClockOutputFrequency)
	Set the clock output frequency of the specified oscilloscope. More...
double	ScpGetSampleFrequencyMax (LibTiePieHandle_t hDevice)
	Get the maximum supported sample frequency of a specified oscilloscope. More...
double	ScpGetSampleFrequency (LibTiePieHandle_t hDevice)
	Get the currently selected sample frequency of a specified oscilloscope. More...
double	ScpSetSampleFrequency (LibTiePieHandle_t hDevice, double dSampleFrequency)
	Set the sample frequency of a specified oscilloscope. More...
uint64_t	ScpGetRecordLengthMax (LibTiePieHandle_t hDevice)
	Get the maximum supported record length of a specified oscilloscope. More...
uint64_t	ScpGetRecordLength (LibTiePieHandle_t hDevice)
	Get the currently selected record length of a specified oscilloscope. More...
uint64_t	ScpSetRecordLength (LibTiePieHandle_t hDevice, uint64_t qwRecordLength)
	Set the record length of a specified oscilloscope. More...
double	ScpGetPreSampleRatio (LibTiePieHandle_t hDevice)
	Get the current pre sample ratio of a specified oscilloscope. More...
double	ScpSetPreSampleRatio (LibTiePieHandle_t hDevice, double dPreSampleRatio)
	Set the pre sample ratio of a specified oscilloscope. More...
uint32_t	ScpGetSegmentCountMax (LibTiePieHandle_t hDevice)
	Get the maximum supported number of segments of a specified oscilloscope. More...
uint32_t	ScpGetSegmentCount (LibTiePieHandle_t hDevice)
	Get the currently selected number of segments of a specified oscilloscope. More...
uint32_t	ScpSetSegmentCount (LibTiePieHandle_t hDevice, uint32_t dwSegmentCount)
	Set the number of segments of a specified oscilloscope. More...
bool8_t	ScpHasTrigger (LibTiePieHandle_t hDevice)
	Check whether the oscilloscope has trigger support with the currently selected measure mode. More...
double	ScpGetTriggerTimeOut (LibTiePieHandle_t hDevice)
	Get the currently selected trigger time out in seconds, for a specified oscilloscope. More...
double	ScpSetTriggerTimeOut (LibTiePieHandle_t hDevice, double dTimeOut)
	Set the trigger time out in seconds, for a specified oscilloscope. More...
bool8_t	ScpHasTriggerDelay (LibTiePieHandle_t hDevice)
	Check whether the oscilloscope has trigger delay support with the currently selected measure mode. More...
double	ScpGetTriggerDelayMax (LibTiePieHandle_t hDevice)
	Get the maximum trigger delay in seconds, for the currently selected measure mode and sample frequency. More...
double	ScpGetTriggerDelay (LibTiePieHandle_t hDevice)
	Get the currently selected trigger delay in seconds, for a specified oscilloscope. More...
double	ScpSetTriggerDelay (LibTiePieHandle_t hDevice, double dDelay)
	Set trigger delay in seconds, for a specified oscilloscope. More...
bool8_t	ScpHasTriggerHoldOff (LibTiePieHandle_t hDevice)
	Check whether the oscilloscope has trigger hold off support with the currently selected measure mode. More...
uint64_t	ScpGetTriggerHoldOffCountMax (LibTiePieHandle_t hDevice)
	Get the maximum trigger hold off count in samples, for a specified oscilloscope. More...
uint64_t	ScpGetTriggerHoldOffCount (LibTiePieHandle_t hDevice)
	Get the trigger hold off count in samples, for a specified oscilloscope. More...
uint64_t	ScpSetTriggerHoldOffCount (LibTiePieHandle_t hDevice, uint64_t qwTriggerHoldOffCount)
	Set the trigger hold off count in samples, for a specified oscilloscope. More...
bool8_t	ScpHasConnectionTest (LibTiePieHandle_t hDevice)
	Check whether the specified oscilloscope supports connection testing. More...
bool8_t	ScpChHasConnectionTest (LibTiePieHandle_t hDevice, uint16_t wCh)
	Check whether a specified channel of a specified oscilloscope supports connection testing. More...
bool8_t	ScpStartConnectionTest (LibTiePieHandle_t hDevice)
	Perform a connection test on all enabled channels of a specified oscilloscope. More...
bool8_t	ScpIsConnectionTestCompleted (LibTiePieHandle_t hDevice)
	Check whether the connection test on a specified oscilloscope is completed. More...
uint16_t	ScpGetConnectionTestData (LibTiePieHandle_t hDevice, LibTiePieTriState_t *pBuffer, uint16_t wChannelCount)
	Get the connection test result data for a specified oscilloscope. More...
uint32_t	GenGetConnectorType (LibTiePieHandle_t hDevice)
	Get the output connector type for a specified generator. More...
bool8_t	GenIsDifferential (LibTiePieHandle_t hDevice)
	Check whether the output of a specified generator is differential. More...
double	GenGetImpedance (LibTiePieHandle_t hDevice)
	Get the output impedance of a specified generator. More...
uint8_t	GenGetResolution (LibTiePieHandle_t hDevice)
	Get the DAC resolution of a specified generator. More...
double	GenGetOutputValueMin (LibTiePieHandle_t hDevice)
	Get the minimum output value of a specified generator. More...
double	GenGetOutputValueMax (LibTiePieHandle_t hDevice)
	Get the maximum output value of a specified generator. More...
bool8_t	GenIsControllable (LibTiePieHandle_t hDevice)
	Check whether a specified generator can be controlled. More...
bool8_t	GenIsRunning (LibTiePieHandle_t hDevice)
	Check whether the generator is running. More...
uint32_t	GenGetStatus (LibTiePieHandle_t hDevice)
	Get the current signal generation status of a specified generator. More...
bool8_t	GenGetOutputOn (LibTiePieHandle_t hDevice)
	Check whether the output of a specified generator is enabled. More...
bool8_t	GenSetOutputOn (LibTiePieHandle_t hDevice, bool8_t bOutputOn)
	Enable or disable the output of a specified generator. More...
bool8_t	GenHasOutputInvert (LibTiePieHandle_t hDevice)
	Check whether the output of a specified generator can be inverted. More...
bool8_t	GenGetOutputInvert (LibTiePieHandle_t hDevice)
	Check whether the output of a specified generator is inverted. More...
bool8_t	GenSetOutputInvert (LibTiePieHandle_t hDevice, bool8_t bInvert)
	Enable or disable the output invert of a specified generator. More...
bool8_t	GenStart (LibTiePieHandle_t hDevice)
	Start the signal generation of a specified generator. More...
bool8_t	GenStop (LibTiePieHandle_t hDevice)
	Stop the signal generation of a specified generator. More...
uint32_t	GenGetSignalTypes (LibTiePieHandle_t hDevice)
	Get the supported signal types of a specified generator. More...
uint32_t	GenGetSignalType (LibTiePieHandle_t hDevice)
	Get the currently selected signal type of a specified generator. More...
uint32_t	GenSetSignalType (LibTiePieHandle_t hDevice, uint32_t dwSignalType)
	Set the signal type of a specified generator. More...
bool8_t	GenHasAmplitude (LibTiePieHandle_t hDevice)
	Check whether the current signal type of a specified generator supports controlling the signal amplitude. More...
double	GenGetAmplitudeMin (LibTiePieHandle_t hDevice)
	Get the minimum signal amplitude for the current signal type of a specified generator. More...
double	GenGetAmplitudeMax (LibTiePieHandle_t hDevice)
	Get the maximum signal amplitude for the current signal type of a specified generator. More...
double	GenGetAmplitude (LibTiePieHandle_t hDevice)
	Get the currently set signal amplitude of a specified generator. More...
double	GenSetAmplitude (LibTiePieHandle_t hDevice, double dAmplitude)
	Set the signal amplitude of a specified generator. More...
uint32_t	GenGetAmplitudeRanges (LibTiePieHandle_t hDevice, double *pList, uint32_t dwLength)
	Get the supported amplitude ranges for a specified generator. More...
double	GenGetAmplitudeRange (LibTiePieHandle_t hDevice)
	Get the currently set amplitude range for a specified generator. More...
double	GenSetAmplitudeRange (LibTiePieHandle_t hDevice, double dRange)
	Set the amplitude range for a specified generator. More...
bool8_t	GenGetAmplitudeAutoRanging (LibTiePieHandle_t hDevice)
	Get the amplitude auto ranging setting for a specified generator. More...
bool8_t	GenSetAmplitudeAutoRanging (LibTiePieHandle_t hDevice, bool8_t bEnable)
	Set the amplitude auto ranging setting for a specified generator. More...
bool8_t	GenHasOffset (LibTiePieHandle_t hDevice)
	Check whether the current signal type of a specified generator supports controlling the signal offset. More...
double	GenGetOffsetMin (LibTiePieHandle_t hDevice)
	Get the minimum offset for the current signal type, of a specified generator. More...
double	GenGetOffsetMax (LibTiePieHandle_t hDevice)
	Get the maximum offset for the current signal type, of a specified generator. More...
double	GenGetOffset (LibTiePieHandle_t hDevice)
	Get the current signal offset of a specified generator. More...
double	GenSetOffset (LibTiePieHandle_t hDevice, double dOffset)
	Set the signal offset of a specified generator. More...
uint32_t	GenGetFrequencyModes (LibTiePieHandle_t hDevice)
	Get the supported generator frequency modes of a specified generator. More...
uint32_t	GenGetFrequencyMode (LibTiePieHandle_t hDevice)
	Get the current generator frequency mode of a specified generator. More...
uint32_t	GenSetFrequencyMode (LibTiePieHandle_t hDevice, uint32_t dwFrequencyMode)
	Set the generator frequency mode of a specified generator. More...
bool8_t	GenHasFrequency (LibTiePieHandle_t hDevice)
	Check whether the current signal type and frequency mode of a specified generator support controlling the signal/sample frequency. More...
double	GenGetFrequencyMin (LibTiePieHandle_t hDevice)
	Get the minimum signal/sample frequency with the current frequency mode, of a specified generator. More...
double	GenGetFrequencyMax (LibTiePieHandle_t hDevice)
	Get the maximum signal/sample frequency with the current frequency mode and signal type, of a specified generator. More...
double	GenGetFrequency (LibTiePieHandle_t hDevice)
	Get the current signal/sample frequency, of a specified generator. More...
double	GenSetFrequency (LibTiePieHandle_t hDevice, double dFrequency)
	Set signal/sample frequency, of a specified generator. More...
bool8_t	GenHasPhase (LibTiePieHandle_t hDevice)
	Check whether the specified generator and the current signal type of the specified generator support controlling the signal phase. More...
double	GenGetPhaseMin (LibTiePieHandle_t hDevice)
	Get the minimum signal phase of a specified generator. More...
double	GenGetPhaseMax (LibTiePieHandle_t hDevice)
	Get the maximum signal phase of a specified generator. More...
double	GenGetPhase (LibTiePieHandle_t hDevice)
	Get the current signal phase of a specified generator. More...
double	GenSetPhase (LibTiePieHandle_t hDevice, double dPhase)
	Set the signal phase of a specified generator. More...
bool8_t	GenHasSymmetry (LibTiePieHandle_t hDevice)
	Check whether the current signal type of a specified generator supports controlling the signal symmetry. More...
double	GenGetSymmetryMin (LibTiePieHandle_t hDevice)
	Get the minimum signal symmetry of a specified generator. More...
double	GenGetSymmetryMax (LibTiePieHandle_t hDevice)
	Get the maximum signal symmetry of a specified generator. More...
double	GenGetSymmetry (LibTiePieHandle_t hDevice)
	Get the current signal symmetry of a specified generator. More...
double	GenSetSymmetry (LibTiePieHandle_t hDevice, double dSymmetry)
	Set the signal symmetry of a specified generator. More...
bool8_t	GenHasWidth (LibTiePieHandle_t hDevice)
	Check whether the current signal type of a specified generator supports controlling the signal pulse width. More...
double	GenGetWidthMin (LibTiePieHandle_t hDevice)
	Get the minimum pulse width with the current signal frequency, of a specified generator. More...
double	GenGetWidthMax (LibTiePieHandle_t hDevice)
	Get the maximum pulse width with the current signal frequency, of a specified generator. More...
double	GenGetWidth (LibTiePieHandle_t hDevice)
	Get the current pulse width, of a specified generator. More...
double	GenSetWidth (LibTiePieHandle_t hDevice, double dWidth)
	Set the pulse width, of a specified generator. More...
bool8_t	GenHasEdgeTime (LibTiePieHandle_t hDevice)
	Check whether the current signal type of a specified generator supports controlling the edge times. More...
double	GenGetLeadingEdgeTimeMin (LibTiePieHandle_t hDevice)
	Get the minimum leading edge time with the current pulse width and signal frequency, of a specified generator. More...
double	GenGetLeadingEdgeTimeMax (LibTiePieHandle_t hDevice)
	Get the maximum leading edge time with the current pulse width and signal frequency, of a specified generator. More...
double	GenGetLeadingEdgeTime (LibTiePieHandle_t hDevice)
	Get the current leading edge time with the current pulse width and signal frequency, of a specified generator. More...
double	GenSetLeadingEdgeTime (LibTiePieHandle_t hDevice, double dLeadingEdgeTime)
	Set the leading edge time, of a specified generator. More...
double	GenGetTrailingEdgeTimeMin (LibTiePieHandle_t hDevice)
	Get the minimum trailing edge time with the current pulse width and signal frequency, of a specified generator. More...
double	GenGetTrailingEdgeTimeMax (LibTiePieHandle_t hDevice)
	Get the maximum trailing edge time with the current pulse width and signal frequency, of a specified generator. More...
double	GenGetTrailingEdgeTime (LibTiePieHandle_t hDevice)
	Get the current trailing edge time with the current pulse width and signal frequency, of a specified generator. More...
double	GenSetTrailingEdgeTime (LibTiePieHandle_t hDevice, double dTrailingEdgeTime)
	Set the trailing edge time, of a specified generator. More...
bool8_t	GenHasData (LibTiePieHandle_t hDevice)
	Check whether the current signal type of a specified generator supports controlling the Arbitrary waveform buffer. More...
uint64_t	GenGetDataLengthMin (LibTiePieHandle_t hDevice)
	Get the minimum length of the waveform buffer of a specified generator. More...
uint64_t	GenGetDataLengthMax (LibTiePieHandle_t hDevice)
	Get the maximum length of the waveform buffer of a specified generator. More...
uint64_t	GenGetDataLength (LibTiePieHandle_t hDevice)
	Get the length of the currently loaded waveform pattern of a specified generator. More...
void	GenSetData (LibTiePieHandle_t hDevice, const float *pBuffer, uint64_t qwSampleCount)
	Load a waveform pattern into the waveform buffer of a specified generator. More...
uint64_t	GenGetModes (LibTiePieHandle_t hDevice)
	Get the supported generator modes for the current signal type and frequency mode of a specified generator. More...
uint64_t	GenGetModesNative (LibTiePieHandle_t hDevice)
	Get all supported generator modes of a specified generator, regardless of the signal type and frequency mode. More...
uint64_t	GenGetMode (LibTiePieHandle_t hDevice)
	Get the current generator mode of a specified generator. More...
uint64_t	GenSetMode (LibTiePieHandle_t hDevice, uint64_t qwGeneratorMode)
	Set the generator mode of a specified generator. More...
bool8_t	GenIsBurstActive (LibTiePieHandle_t hDevice)
	Check whether a burst is active, of a specified generator. More...
uint64_t	GenGetBurstCountMin (LibTiePieHandle_t hDevice)
	Get the minimum burst count for the current generator mode of a specified generator. More...
uint64_t	GenGetBurstCountMax (LibTiePieHandle_t hDevice)
	Get the maximum burst count for the current generator mode of a specified generator. More...
uint64_t	GenGetBurstCount (LibTiePieHandle_t hDevice)
	Get the current burst count for the current generator mode of a specified generator. More...
uint64_t	GenSetBurstCount (LibTiePieHandle_t hDevice, uint64_t qwBurstCount)
	Set the burst count for the current generator mode of a specified generator. More...
uint64_t	GenGetBurstSampleCountMin (LibTiePieHandle_t hDevice)
	Get the minimum burst sample count for the current generator mode of a specified generator. More...
uint64_t	GenGetBurstSampleCountMax (LibTiePieHandle_t hDevice)
	Get the maximum burst sample count for the current generator mode of a specified generator. More...
uint64_t	GenGetBurstSampleCount (LibTiePieHandle_t hDevice)
	Get the current burst sample count for the current generator mode of a specified generator. More...
uint64_t	GenSetBurstSampleCount (LibTiePieHandle_t hDevice, uint64_t qwBurstSampleCount)
	Set the burst sample count for the current generator mode of a specified generator. More...
uint64_t	GenGetBurstSegmentCountMin (LibTiePieHandle_t hDevice)
	Get the minimum burst segment count for the current settings of a specified generator. More...
uint64_t	GenGetBurstSegmentCountMax (LibTiePieHandle_t hDevice)
	Get the maximum burst segment count for the current settings of a specified generator. More...
uint64_t	GenGetBurstSegmentCount (LibTiePieHandle_t hDevice)
	Get the current burst segment count of a specified generator. More...
uint64_t	GenSetBurstSegmentCount (LibTiePieHandle_t hDevice, uint64_t qwBurstSegmentCount)
	Set the burst segment count of a specified generator. More...
void	GenSetCallbackBurstCompleted (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
	Set a callback function which is called when the generator burst is completed. More...
void	GenSetEventBurstCompleted (LibTiePieHandle_t hDevice, int fdEvent)
	Set an event file descriptor which is set when the generator burst is completed. More...
void	GenSetEventBurstCompleted (LibTiePieHandle_t hDevice, HANDLE hEvent)
	Set an event object handle which is set when the generator burst is completed. More...
void	GenSetMessageBurstCompleted (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
	Set a window handle to which a WM_LIBTIEPIE_GEN_BURSTCOMPLETED message is sent when the generator burst is completed. More...
void	GenSetCallbackControllableChanged (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
	Set a callback function which is called when the generator controllable property changes. More...
void	GenSetEventControllableChanged (LibTiePieHandle_t hDevice, int fdEvent)
	Set an event file descriptor which is set when the generator controllable property changes. More...
void	GenSetEventControllableChanged (LibTiePieHandle_t hDevice, HANDLE hEvent)
	Set event object handle which is set when the generator controllable property changes. More...
void	GenSetMessageControllableChanged (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
	Set window handle to which a WM_LIBTIEPIE_GEN_CONTROLLABLECHANGED message is sent when the generator controllable property changes. More...
bool8_t	I2CIsInternalAddress (LibTiePieHandle_t hDevice, uint16_t wAddress)
	Check whether an address is used internally. More...
uint32_t	I2CGetInternalAddresses (LibTiePieHandle_t hDevice, uint16_t *pAddresses, uint32_t dwLength)
	Get all addresses which are used internally. More...
bool8_t	I2CRead (LibTiePieHandle_t hDevice, uint16_t wAddress, void *pBuffer, uint32_t dwSize, bool8_t bStop)
	Read data from a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CReadByte (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t *pValue)
	Read one byte from a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CReadWord (LibTiePieHandle_t hDevice, uint16_t wAddress, uint16_t *pValue)
	Read one word from a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CWrite (LibTiePieHandle_t hDevice, uint16_t wAddress, const void *pBuffer, uint32_t dwSize, bool8_t bStop)
	Write data to a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CWriteByte (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t byValue)
	Write one byte to a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CWriteByteByte (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t byValue1, uint8_t byValue2)
	Write two bytes to a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CWriteByteWord (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t byValue1, uint16_t wValue2)
	Write one byte and one word to a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CWriteWord (LibTiePieHandle_t hDevice, uint16_t wAddress, uint16_t wValue)
	Write one word to a specified address on the I2C bus, using a specified I2C host. More...
bool8_t	I2CWriteRead (LibTiePieHandle_t hDevice, uint16_t wAddress, const void *pWriteBuffer, uint32_t dwWriteSize, void *pReadBuffer, uint32_t dwReadSize)
	Write and read data to/from to a specified address on the I2C bus, using a specified I2C host. More...
double	I2CGetSpeedMax (LibTiePieHandle_t hDevice)
	Get the maximum clock speed on the I2C bus controlled by a specified I2C host. More...
double	I2CGetSpeed (LibTiePieHandle_t hDevice)
	Get the current clock speed on the I2C bus controlled by a specified I2C host. More...
double	I2CSetSpeed (LibTiePieHandle_t hDevice, double dSpeed)
	Set the clock speed on the I2C bus controlled by a specified I2C host. More...
LibTiePiePointerArray_t	HlpPointerArrayNew (uint32_t dwLength)
	Create a new pointer array. More...
void	HlpPointerArraySet (LibTiePiePointerArray_t pArray, uint32_t dwIndex, void *pPointer)
	Set a pointer at a specified index in a specified pointer array. More...
void	HlpPointerArrayDelete (LibTiePiePointerArray_t pArray)
	Delete an existing pointer array. More...

Detailed Description

Header for libtiepie.

Definition in file libtiepie.h.

Macro Definition Documentation

#define LIBTIEPIE_VERSION_MAJOR   0

Definition at line 59 of file libtiepie.h.

#define LIBTIEPIE_VERSION_MINOR   7

Definition at line 60 of file libtiepie.h.

#define LIBTIEPIE_VERSION_RELEASE   4

Definition at line 61 of file libtiepie.h.

#define LIBTIEPIE_VERSION_NUMBER   "0.7.4"

Definition at line 62 of file libtiepie.h.

#define LIBTIEPIE_VERSION   "0.7.4"

Definition at line 63 of file libtiepie.h.

#define LIBTIEPIE_REVISION   12616

Definition at line 64 of file libtiepie.h.