LibTiePie  0.7.1
Library for interfacing TiePie engineering instruments
libtiepie.h File Reference

Header for libtiepie. More...

Go to the source code of this file.

Macros

#define LIBTIEPIE_VERSION_MAJOR   0
 
#define LIBTIEPIE_VERSION_MINOR   7
 
#define LIBTIEPIE_VERSION_RELEASE   1
 
#define LIBTIEPIE_VERSION_NUMBER   "0.7.1"
 
#define LIBTIEPIE_VERSION   "0.7.1"
 
#define LIBTIEPIE_REVISION   12259
 
#define LIBTIEPIE_HANDLE_INVALID   0
 
#define TPDEVICEHANDLE_INVALID   LIBTIEPIE_HANDLE_INVALID
 
#define LIBTIEPIE_INTERFACE_DEVICE   0x0000000000000001
 
#define LIBTIEPIE_INTERFACE_OSCILLOSCOPE   0x0000000000000002
 
#define LIBTIEPIE_INTERFACE_GENERATOR   0x0000000000000004
 
#define LIBTIEPIE_INTERFACE_I2CHOST   0x0000000000000008
 
#define DEVICETYPE_OSCILLOSCOPE   0x00000001
 Oscilloscope. More...
 
#define DEVICETYPE_GENERATOR   0x00000002
 Generator. More...
 
#define DEVICETYPE_I2CHOST   0x00000004
 I2C Host. More...
 
#define DEVICETYPE_COUNT   3
 Number of device types. More...
 
#define IDKIND_PRODUCTID   0x00000001
 dwId parameter is a product id. More...
 
#define IDKIND_INDEX   0x00000002
 dwId parameter is an index. More...
 
#define IDKIND_SERIALNUMBER   0x00000004
 dwId parameter is a serial number. More...
 
#define IDKIND_COUNT   3
 Number of id kinds. More...
 
#define LIBTIEPIESTATUS_SUCCESS   0
 The function executed successfully. More...
 
#define LIBTIEPIESTATUS_VALUE_CLIPPED   1
 One of the parameters of the last called function was outside the valid range and clipped to the closest limit. More...
 
#define LIBTIEPIESTATUS_VALUE_MODIFIED   2
 One of the parameters of the last called function was within the valid range but not available. The closest valid value is set. More...
 
#define LIBTIEPIESTATUS_UNSUCCESSFUL   -1
 An error occurred during execution of the last called function. More...
 
#define LIBTIEPIESTATUS_NOT_SUPPORTED   -2
 The requested functionality is not supported by the hardware. More...
 
#define LIBTIEPIESTATUS_INVALID_HANDLE   -3
 The handle to the device is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_VALUE   -4
 The requested value is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_CHANNEL   -5
 The requested channel number is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_TRIGGER_SOURCE   -6
 The requested trigger source is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_DEVICE_TYPE   -7
 The device type is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_DEVICE_INDEX   -8
 The device index is invalid, must be < LstGetCount(). More...
 
#define LIBTIEPIESTATUS_INVALID_PRODUCT_ID   -9
 There is no device with the requested product ID. More...
 
#define LIBTIEPIESTATUS_INVALID_DEVICE_SERIALNUMBER   -10
 There is no device with the requested serial number. More...
 
#define LIBTIEPIESTATUS_OBJECT_GONE   -11
 The object indicated by the handle is no longer available. More...
 
#define LIBTIEPIESTATUS_DEVICE_GONE   LIBTIEPIESTATUS_OBJECT_GONE
 
#define LIBTIEPIESTATUS_INTERNAL_ADDRESS   -12
 The requested I2C address is an internally used address in the device. More...
 
#define LIBTIEPIESTATUS_NOT_CONTROLLABLE   -13
 The generator is currently not controllable, see GenIsControllable. More...
 
#define LIBTIEPIESTATUS_BIT_ERROR   -14
 The requested I2C operation generated a bit error. More...
 
#define LIBTIEPIESTATUS_NO_ACKNOWLEDGE   -15
 The requested I2C operation generated "No acknowledge". More...
 
#define LIBTIEPIESTATUS_INVALID_CONTAINED_DEVICE_SERIALNUMBER   -16
 A device with the requested serial number is not available in the combined instrument, see LstDevGetContainedSerialNumbers. More...
 
#define LIBTIEPIESTATUS_INVALID_INPUT   -17
 The requested trigger input is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_OUTPUT   -18
 The requested trigger output is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_DRIVER   -19
 The currently installed driver is not supported, see LstDevGetRecommendedDriverVersion(). (Windows only) More...
 
#define LIBTIEPIESTATUS_NOT_AVAILABLE   -20
 With the current settings, the requested functionality is not available. More...
 
#define LIBTIEPIESTATUS_INVALID_FIRMWARE   -21
 The currently used firmware is not supported . More...
 
#define LIBTIEPIESTATUS_INVALID_INDEX   -22
 The requested index is invalid. More...
 
#define LIBTIEPIESTATUS_INVALID_EEPROM   -23
 The instrument's EEPROM content is damaged, please contact TiePie engineering support. More...
 
#define LIBTIEPIESTATUS_INITIALIZATION_FAILED   -24
 The instrument's initialization failed, please contact TiePie engineering support. More...
 
#define LIBTIEPIESTATUS_LIBRARY_NOT_INITIALIZED   -25
 The library is not initialized, see LibInit(). More...
 
#define LIBTIEPIESTATUS_NO_TRIGGER_ENABLED   -26
 The current setup requires a trigger input to be enabled. More...
 
#define LIBTIEPIESTATUS_SYNCHRONIZATION_FAILED   -29
 XXX. More...
 
#define LIBTIEPIESTATUS_INVALID_HS56_COMBINED_DEVICE   -30
 At least one Handyscope HS6 DIFF must be located at the beginning or end of the CMI daisy chain. More...
 
#define LIBTIEPIESTATUS_MEASUREMENT_RUNNING   -31
 A measurement is already running. More...
 
#define CONNECTORTYPE_UNKNOWN   0x00000000
 
#define CONNECTORTYPE_BNC   0x00000001
 
#define CONNECTORTYPE_BANANA   0x00000002
 
#define CONNECTORTYPE_POWERPLUG   0x00000004
 
#define CONNECTORTYPE_COUNT   3
 Number of connector types. More...
 
#define CONNECTORTYPE_MASK   ( CONNECTORTYPE_BNC | CONNECTORTYPE_BANANA | CONNECTORTYPE_POWERPLUG )
 
#define DATARAWTYPE_UNKNOWN   0x00000000
 
#define DATARAWTYPE_INT8   0x00000001
 int8_t More...
 
#define DATARAWTYPE_INT16   0x00000002
 int16_t More...
 
#define DATARAWTYPE_INT32   0x00000004
 int32_t More...
 
#define DATARAWTYPE_INT64   0x00000008
 int64_t More...
 
#define DATARAWTYPE_UINT8   0x00000010
 uint8_t More...
 
#define DATARAWTYPE_UINT16   0x00000020
 uint16_t More...
 
#define DATARAWTYPE_UINT32   0x00000040
 uint32_t More...
 
#define DATARAWTYPE_UINT64   0x00000080
 uint64_t More...
 
#define DATARAWTYPE_FLOAT32   0x00000100
 float More...
 
#define DATARAWTYPE_FLOAT64   0x00000200
 double More...
 
#define DATARAWTYPE_COUNT   10
 Number of raw data types. More...
 
#define DATARAWTYPE_MASK_INT   ( DATARAWTYPE_INT8 | DATARAWTYPE_INT16 | DATARAWTYPE_INT32 | DATARAWTYPE_INT64 )
 
#define DATARAWTYPE_MASK_UINT   ( DATARAWTYPE_UINT8 | DATARAWTYPE_UINT16 | DATARAWTYPE_UINT32 | DATARAWTYPE_UINT64 )
 
#define DATARAWTYPE_MASK_FLOAT   ( DATARAWTYPE_FLOAT32 | DATARAWTYPE_FLOAT64 )
 
#define DATARAWTYPE_MASK_FIXED   ( DATARAWTYPE_MASK_INT | DATARAWTYPE_MASK_UINT )
 
#define BOOL8_FALSE   0
 
#define BOOL8_TRUE   1
 
#define LIBTIEPIE_TRISTATE_UNDEFINED   0
 Undefined. More...
 
#define LIBTIEPIE_TRISTATE_FALSE   1
 False. More...
 
#define LIBTIEPIE_TRISTATE_TRUE   2
 True. More...
 
#define LIBTIEPIE_TRIGGERIO_INDEX_INVALID   0xffff
 
#define LIBTIEPIE_STRING_LENGTH_NULL_TERMINATED   0xffffffff
 
#define LIBTIEPIE_POINTER_ARRAY_MAX_LENGTH   256
 
#define ARN_COUNT   3
 Number of auto resolution modes. More...
 
#define ARB_DISABLED   0
 
#define ARB_NATIVEONLY   1
 
#define ARB_ALL   2
 
#define AR_UNKNOWN   0
 Unknown/invalid mode. More...
 
#define AR_DISABLED   ( 1 << ARB_DISABLED )
 Resolution does not automatically change. More...
 
#define AR_NATIVEONLY   ( 1 << ARB_NATIVEONLY )
 Highest possible native resolution for the current sample frequency is used. More...
 
#define AR_ALL   ( 1 << ARB_ALL )
 Highest possible native or enhanced resolution for the current sample frequency is used. More...
 
#define ARM_NONE   0
 
#define ARM_ALL   ( ( 1 << ARN_COUNT ) - 1 )
 
#define ARM_ENABLED   ( ARM_ALL & ~AR_DISABLED )
 
#define CKN_COUNT   5
 Number of couplings. More...
 
#define CKB_DCV   0
 Volt DC. More...
 
#define CKB_ACV   1
 Volt AC. More...
 
#define CKB_DCA   2
 Ampere DC. More...
 
#define CKB_ACA   3
 Ampere AC. More...
 
#define CKB_OHM   4
 Ohm. More...
 
#define CK_UNKNOWN   0
 Unknown/invalid coupling. More...
 
#define CK_DCV   ( 1 << CKB_DCV )
 Volt DC. More...
 
#define CK_ACV   ( 1 << CKB_ACV )
 Volt AC. More...
 
#define CK_DCA   ( 1 << CKB_DCA )
 Ampere DC. More...
 
#define CK_ACA   ( 1 << CKB_ACA )
 Ampere AC. More...
 
#define CK_OHM   ( 1 << CKB_OHM )
 Ohm. More...
 
#define CKM_NONE   0
 
#define CKM_V   ( CK_DCV | CK_ACV )
 Volt. More...
 
#define CKM_A   ( CK_DCA | CK_ACA )
 Ampere. More...
 
#define CKM_OHM   ( CK_OHM )
 Ohm. More...
 
#define CKM_ASYMMETRICRANGE   ( CKM_OHM )
 0 to +Range More...
 
#define CKM_SYMMETRICRANGE   ( CKM_V | CKM_A )
 -Range to +Range More...
 
#define CON_COUNT   3
 Number of clock output types. More...
 
#define COB_DISABLED   0
 No clock output. More...
 
#define COB_SAMPLE   1
 Sample clock. More...
 
#define COB_FIXED   2
 Fixed clock. More...
 
#define CO_DISABLED   ( 1 << COB_DISABLED )
 No clock output. More...
 
#define CO_SAMPLE   ( 1 << COB_SAMPLE )
 Sample clock. More...
 
#define CO_FIXED   ( 1 << COB_FIXED )
 Fixed clock. More...
 
#define COM_NONE   0
 
#define COM_ALL   ( ( 1 << CON_COUNT ) - 1 )
 
#define COM_ENABLED   ( COM_ALL & ~CO_DISABLED )
 
#define COM_FREQUENCY   ( CO_FIXED )
 
#define CSN_COUNT   2
 Number of clock sources. More...
 
#define CSB_EXTERNAL   0
 External clock. More...
 
#define CSB_INTERNAL   1
 Internal clock. More...
 
#define CS_EXTERNAL   ( 1 << CSB_EXTERNAL )
 External clock. More...
 
#define CS_INTERNAL   ( 1 << CSB_INTERNAL )
 Internal clock. More...
 
#define CSM_NONE   0
 
#define CSM_ALL   ( ( 1 << CSN_COUNT ) - 1 )
 
#define CSM_FREQUENCY   ( CS_EXTERNAL )
 
#define FMN_COUNT   2
 Number of frequency modes. More...
 
#define FMB_SIGNALFREQUENCY   0
 
#define FMB_SAMPLEFREQUENCY   1
 
#define FM_UNKNOWN   0x00000000
 
#define FM_SIGNALFREQUENCY   ( 1 << FMB_SIGNALFREQUENCY )
 
#define FM_SAMPLEFREQUENCY   ( 1 << FMB_SAMPLEFREQUENCY )
 
#define FMM_NONE   0x00000000
 
#define FMM_ALL   ( ( 1 << FMN_COUNT ) - 1 )
 
#define GMN_COUNT   12
 Number of generator modes. More...
 
#define GMB_CONTINUOUS   0
 
#define GMB_BURST_COUNT   1
 
#define GMB_GATED_PERIODS   2
 
#define GMB_GATED   3
 
#define GMB_GATED_PERIOD_START   4
 
#define GMB_GATED_PERIOD_FINISH   5
 
#define GMB_GATED_RUN   6
 
#define GMB_GATED_RUN_OUTPUT   7
 
#define GMB_BURST_SAMPLE_COUNT   8
 
#define GMB_BURST_SAMPLE_COUNT_OUTPUT   9
 
#define GMB_BURST_SEGMENT_COUNT   10
 
#define GMB_BURST_SEGMENT_COUNT_OUTPUT   11
 
#define GM_UNKNOWN   0
 
#define GM_CONTINUOUS   ( 1 << GMB_CONTINUOUS )
 
#define GM_BURST_COUNT   ( 1 << GMB_BURST_COUNT )
 
#define GM_GATED_PERIODS   ( 1 << GMB_GATED_PERIODS )
 
#define GM_GATED   ( 1 << GMB_GATED )
 
#define GM_GATED_PERIOD_START   ( 1 << GMB_GATED_PERIOD_START )
 
#define GM_GATED_PERIOD_FINISH   ( 1 << GMB_GATED_PERIOD_FINISH )
 
#define GM_GATED_RUN   ( 1 << GMB_GATED_RUN )
 
#define GM_GATED_RUN_OUTPUT   ( 1 << GMB_GATED_RUN_OUTPUT )
 
#define GM_BURST_SAMPLE_COUNT   ( 1 << GMB_BURST_SAMPLE_COUNT )
 
#define GM_BURST_SAMPLE_COUNT_OUTPUT   ( 1 << GMB_BURST_SAMPLE_COUNT_OUTPUT )
 
#define GM_BURST_SEGMENT_COUNT   ( 1 << GMB_BURST_SEGMENT_COUNT )
 
#define GM_BURST_SEGMENT_COUNT_OUTPUT   ( 1 << GMB_BURST_SEGMENT_COUNT_OUTPUT )
 
#define GMM_NONE   0
 
#define GMM_BURST_COUNT   ( GM_BURST_COUNT )
 
#define GMM_GATED   ( GM_GATED_PERIODS | GM_GATED | GM_GATED_PERIOD_START | GM_GATED_PERIOD_FINISH | GM_GATED_RUN | GM_GATED_RUN_OUTPUT )
 
#define GMM_BURST_SAMPLE_COUNT   ( GM_BURST_SAMPLE_COUNT | GM_BURST_SAMPLE_COUNT_OUTPUT )
 
#define GMM_BURST_SEGMENT_COUNT   ( GM_BURST_SEGMENT_COUNT | GM_BURST_SEGMENT_COUNT_OUTPUT )
 
#define GMM_BURST   ( GMM_BURST_COUNT | GMM_BURST_SAMPLE_COUNT | GMM_BURST_SEGMENT_COUNT )
 
#define GMM_REQUIRE_TRIGGER   ( GMM_GATED | GMM_BURST_SAMPLE_COUNT | GMM_BURST_SEGMENT_COUNT )
 Generator modes that require an enabeld trigger input. More...
 
#define GMM_ALL   ( ( 1ULL << GMN_COUNT ) - 1 )
 
#define GMM_SIGNALFREQUENCY   ( GMM_ALL & ~GMM_BURST_SAMPLE_COUNT )
 Supported generator modes when frequency mode is signal frequency. More...
 
#define GMM_SAMPLEFREQUENCY   ( GMM_ALL )
 Supported generator modes when frequency mode is sample frequency. More...
 
#define GMM_SINE   ( GMM_SIGNALFREQUENCY )
 Supported generator modes when signal type is sine. More...
 
#define GMM_TRIANGLE   ( GMM_SIGNALFREQUENCY )
 Supported generator modes when signal type is triangle. More...
 
#define GMM_SQUARE   ( GMM_SIGNALFREQUENCY )
 Supported generator modes when signal type is square. More...
 
#define GMM_DC   ( GM_CONTINUOUS )
 Supported generator modes when signal type is DC. More...
 
#define GMM_NOISE   ( GM_CONTINUOUS | GM_GATED )
 Supported generator modes when signal type is noise. More...
 
#define GMM_ARBITRARY   ( GMM_SIGNALFREQUENCY | GMM_SAMPLEFREQUENCY )
 Supported generator modes when signal type is arbitrary. More...
 
#define GMM_PULSE   ( GMM_SIGNALFREQUENCY & ~GMM_BURST_SEGMENT_COUNT )
 Supported generator modes when signal type is pulse. More...
 
#define GSN_COUNT   4
 The number of generator status flags. More...
 
#define GSB_STOPPED   0
 
#define GSB_RUNNING   1
 
#define GSB_BURSTACTIVE   2
 
#define GSB_WAITING   3
 
#define GS_STOPPED   ( 1 << GSB_STOPPED )
 The signal generation is stopped. More...
 
#define GS_RUNNING   ( 1 << GSB_RUNNING )
 The signal generation is running. More...
 
#define GS_BURSTACTIVE   ( 1 << GSB_BURSTACTIVE )
 The generator is operating in burst mode. More...
 
#define GS_WAITING   ( 1 << GSB_WAITING )
 The generator is waiting for a burst to be started. More...
 
#define GSM_NONE   0
 
#define GSM_ALL   ( ( 1UL << GSN_COUNT ) - 1 )
 
#define MMN_COUNT   2
 Number of measure modes. More...
 
#define MMB_STREAM   0
 Stream mode bit number. More...
 
#define MMB_BLOCK   1
 Block mode bit number. More...
 
#define MMM_NONE   0
 
#define MMM_ALL   ( ( 1 << MMN_COUNT ) - 1 )
 
#define MM_UNKNOWN   0
 Unknown/invalid mode. More...
 
#define MM_STREAM   ( 1 << MMB_STREAM )
 Stream mode. More...
 
#define MM_BLOCK   ( 1 << MMB_BLOCK )
 Block mode. More...
 
#define STN_COUNT   7
 Number of signal types. More...
 
#define STB_SINE   0
 
#define STB_TRIANGLE   1
 
#define STB_SQUARE   2
 
#define STB_DC   3
 
#define STB_NOISE   4
 
#define STB_ARBITRARY   5
 
#define STB_PULSE   6
 
#define ST_UNKNOWN   0
 
#define ST_SINE   ( 1 << STB_SINE )
 
#define ST_TRIANGLE   ( 1 << STB_TRIANGLE )
 
#define ST_SQUARE   ( 1 << STB_SQUARE )
 
#define ST_DC   ( 1 << STB_DC )
 
#define ST_NOISE   ( 1 << STB_NOISE )
 
#define ST_ARBITRARY   ( 1 << STB_ARBITRARY )
 
#define ST_PULSE   ( 1 << STB_PULSE )
 
#define STM_NONE   0
 
#define STM_AMPLITUDE   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_NOISE | ST_ARBITRARY | ST_PULSE )
 
#define STM_OFFSET   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_DC | ST_NOISE | ST_ARBITRARY | ST_PULSE )
 
#define STM_FREQUENCY   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_NOISE | ST_ARBITRARY | ST_PULSE )
 
#define STM_PHASE   ( ST_SINE | ST_TRIANGLE | ST_SQUARE | ST_ARBITRARY | ST_PULSE )
 
#define STM_SYMMETRY   ( ST_SINE | ST_TRIANGLE | ST_SQUARE )
 
#define STM_WIDTH   ( ST_PULSE )
 
#define STM_LEADINGEDGETIME   ( ST_PULSE )
 
#define STM_TRAILINGEDGETIME   ( ST_PULSE )
 
#define STM_DATALENGTH   ( ST_ARBITRARY )
 
#define STM_DATA   ( ST_ARBITRARY )
 
#define STM_EDGETIME   ( STM_LEADINGEDGETIME & STM_TRAILINGEDGETIME )
 
#define TCN_COUNT   5
 Number of trigger conditions. More...
 
#define TCB_NONE   0
 
#define TCB_SMALLER   1
 
#define TCB_LARGER   2
 
#define TCB_INSIDE   3
 
#define TCB_OUTSIDE   4
 
#define TC_UNKNOWN   0
 
#define TC_NONE   ( 1 << TCB_NONE )
 
#define TC_SMALLER   ( 1 << TCB_SMALLER )
 
#define TC_LARGER   ( 1 << TCB_LARGER )
 
#define TC_INSIDE   ( 1 << TCB_INSIDE )
 
#define TC_OUTSIDE   ( 1 << TCB_OUTSIDE )
 
#define TCM_NONE   0
 No conditions. More...
 
#define TCM_ALL   ( ( 1 << TCN_COUNT ) - 1 )
 All conditions. More...
 
#define TCM_ENABLED   ( TCM_ALL & ~TC_NONE )
 All conditions except TC_NONE. More...
 
#define TH_ALLPRESAMPLES   0xffffffffffffffffULL
 Trigger hold off to all presamples valid More...
 
#define DN_MAIN   0
 The device itself. More...
 
#define DN_SUB_FIRST   1
 First sub device in a combined device. More...
 
#define DN_SUB_SECOND   2
 Second sub device in a combined device. More...
 
#define PGID_OSCILLOSCOPE   1
 Oscilloscope. More...
 
#define PGID_GENERATOR   2
 Generator. More...
 
#define PGID_EXTERNAL_DSUB   3
 External D-sub. More...
 
#define SGID_MAIN   0
 The oscilloscope or function generator itself. More...
 
#define SGID_CHANNEL1   1
 
#define SGID_CHANNEL2   2
 
#define SGID_PIN1   1
 
#define SGID_PIN2   2
 
#define SGID_PIN3   3
 
#define FID_SCP_TRIGGERED   0
 
#define FID_GEN_START   0
 
#define FID_GEN_STOP   1
 
#define FID_GEN_NEW_PERIOD   2
 
#define FID_EXT_TRIGGERED   0
 
#define TIOID_SHIFT_PGID   20
 
#define TIOID_SHIFT_DN   24
 
#define TIOID_SHIFT_SGID   8
 
#define TIOID_SHIFT_FID   0
 
#define TIID_INVALID   0
 
#define TIID_EXT1   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN1 , FID_EXT_TRIGGERED )
 
#define TIID_EXT2   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN2 , FID_EXT_TRIGGERED )
 
#define TIID_EXT3   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN3 , FID_EXT_TRIGGERED )
 
#define TIID_GENERATOR_START   TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_START )
 
#define TIID_GENERATOR_STOP   TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_STOP )
 
#define TIID_GENERATOR_NEW_PERIOD   TRIGGER_IO_ID( PGID_GENERATOR , SGID_MAIN , FID_GEN_NEW_PERIOD )
 
#define TOID_INVALID   0
 
#define TOID_EXT1   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN1 , FID_EXT_TRIGGERED )
 
#define TOID_EXT2   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN2 , FID_EXT_TRIGGERED )
 
#define TOID_EXT3   TRIGGER_IO_ID( PGID_EXTERNAL_DSUB , SGID_PIN3 , FID_EXT_TRIGGERED )
 
#define TKN_COUNT   13
 Number of trigger kinds. More...
 
#define TKB_RISINGEDGE   0
 
#define TKB_FALLINGEDGE   1
 
#define TKB_INWINDOW   2
 
#define TKB_OUTWINDOW   3
 
#define TKB_ANYEDGE   4
 
#define TKB_ENTERWINDOW   5
 
#define TKB_EXITWINDOW   6
 
#define TKB_PULSEWIDTHPOSITIVE   7
 
#define TKB_PULSEWIDTHNEGATIVE   8
 
#define TKB_PULSEWIDTHEITHER   9
 
#define TKB_RUNTPULSEPOSITIVE   10
 
#define TKB_RUNTPULSENEGATIVE   11
 
#define TKB_RUNTPULSEEITHER   12
 
#define TK_UNKNOWN   0
 Unknown/invalid trigger kind. More...
 
#define TK_RISINGEDGE   ( 1ULL << TKB_RISINGEDGE )
 Rising edge. More...
 
#define TK_FALLINGEDGE   ( 1ULL << TKB_FALLINGEDGE )
 Falling edge. More...
 
#define TK_INWINDOW   ( 1ULL << TKB_INWINDOW )
 Inside window. More...
 
#define TK_OUTWINDOW   ( 1ULL << TKB_OUTWINDOW )
 Outside window. More...
 
#define TK_ANYEDGE   ( 1ULL << TKB_ANYEDGE )
 Any edge. More...
 
#define TK_ENTERWINDOW   ( 1ULL << TKB_ENTERWINDOW )
 Enter window. More...
 
#define TK_EXITWINDOW   ( 1ULL << TKB_EXITWINDOW )
 Exit window. More...
 
#define TK_PULSEWIDTHPOSITIVE   ( 1ULL << TKB_PULSEWIDTHPOSITIVE )
 Positive pulse width. More...
 
#define TK_PULSEWIDTHNEGATIVE   ( 1ULL << TKB_PULSEWIDTHNEGATIVE )
 Negative pulse width. More...
 
#define TK_PULSEWIDTHEITHER   ( 1ULL << TKB_PULSEWIDTHEITHER )
 Positive or negative pulse width. More...
 
#define TK_RUNTPULSEPOSITIVE   ( 1ULL << TKB_RUNTPULSEPOSITIVE )
 Positive runt pulse. More...
 
#define TK_RUNTPULSENEGATIVE   ( 1ULL << TKB_RUNTPULSENEGATIVE )
 Negative runt pulse. More...
 
#define TK_RUNTPULSEEITHER   ( 1ULL << TKB_RUNTPULSEEITHER )
 Positive or negative runt pulse. More...
 
#define TKM_NONE   0
 No trigger kinds. More...
 
#define TKM_EDGE   ( TK_RISINGEDGE | TK_FALLINGEDGE | TK_ANYEDGE )
 All edge triggers. More...
 
#define TKM_WINDOW   ( TK_INWINDOW | TK_OUTWINDOW | TK_ENTERWINDOW | TK_EXITWINDOW )
 All window triggers. More...
 
#define TKM_PULSEWIDTH   ( TK_PULSEWIDTHPOSITIVE | TK_PULSEWIDTHNEGATIVE | TK_PULSEWIDTHEITHER )
 All pulse width triggers. More...
 
#define TKM_RUNTPULSE   ( TK_RUNTPULSEPOSITIVE | TK_RUNTPULSENEGATIVE | TK_RUNTPULSEEITHER )
 All runt pulse triggers. More...
 
#define TKM_PULSE   ( TKM_PULSEWIDTH | TKM_RUNTPULSE )
 All pulse triggers. More...
 
#define TKM_TIME   ( TKM_PULSEWIDTH | TKM_WINDOW )
 All trigger kinds that may have a time property. More...
 
#define TKM_ALL   ( ( 1ULL << TKN_COUNT ) - 1 )
 All trigger kinds. More...
 
#define TLMN_COUNT   2
 Number of trigger level modes. More...
 
#define TLMB_RELATIVE   0
 
#define TLMB_ABSOLUTE   1
 
#define TLM_UNKNOWN   0
 
#define TLM_RELATIVE   ( 1 << TLMB_RELATIVE )
 
#define TLM_ABSOLUTE   ( 1 << TLMB_ABSOLUTE )
 
#define TLMM_NONE   0
 
#define TLMM_ALL   ( ( 1 << TLMN_COUNT ) - 1 )
 
#define TO_INFINITY   -1
 No time out. More...
 
#define TOEN_COUNT   6
 Number of trigger output events. More...
 
#define TOEB_GENERATOR_START   0
 
#define TOEB_GENERATOR_STOP   1
 
#define TOEB_GENERATOR_NEWPERIOD   2
 
#define TOEB_OSCILLOSCOPE_RUNNING   3
 
#define TOEB_OSCILLOSCOPE_TRIGGERED   4
 
#define TOEB_MANUAL   5
 
#define TOE_UNKNOWN   0
 
#define TOE_GENERATOR_START   ( 1 << TOEB_GENERATOR_START )
 
#define TOE_GENERATOR_STOP   ( 1 << TOEB_GENERATOR_STOP )
 
#define TOE_GENERATOR_NEWPERIOD   ( 1 << TOEB_GENERATOR_NEWPERIOD )
 
#define TOE_OSCILLOSCOPE_RUNNING   ( 1 << TOEB_OSCILLOSCOPE_RUNNING )
 
#define TOE_OSCILLOSCOPE_TRIGGERED   ( 1 << TOEB_OSCILLOSCOPE_TRIGGERED )
 
#define TOE_MANUAL   ( 1 << TOEB_MANUAL )
 
#define TOEM_NONE   0
 No trigger output events. More...
 
#define TOEM_GENERATOR   ( TOE_GENERATOR_START | TOE_GENERATOR_STOP | TOE_GENERATOR_NEWPERIOD )
 All generator trigger output events. More...
 
#define TOEM_OSCILLOSCOPE   ( TOE_OSCILLOSCOPE_RUNNING | TOE_OSCILLOSCOPE_TRIGGERED )
 All oscilloscope trigger output events. More...
 
#define TOEM_ALL   ( ( 1ULL << TOEN_COUNT ) - 1 )
 All trigger output events. More...
 
#define PID_NONE   0
 Unknown/invalid ID. More...
 
#define PID_COMBI   2
 Combined instrument. More...
 
#define PID_HS3   13
 Handyscope HS3. More...
 
#define PID_HS4   15
 Handyscope HS4. More...
 
#define PID_HP3   18
 Handyprobe HP3. More...
 
#define PID_TP450   19
 TP450. More...
 
#define PID_HS4D   20
 Handyscope HS4-DIFF. More...
 
#define PID_HS5   22
 Handyscope HS5. More...
 
#define PID_HS6D   25
 Handyscope HS6 DIFF. More...
 
#define PID_ATS610004D   31
 ATS610004D. More...
 
#define PID_ATS605004D   32
 ATS605004D. More...
 
#define LIBTIEPIE_EVENTID_INVALID   0
 This event ID value should not occur. More...
 
#define LIBTIEPIE_EVENTID_OBJ_REMOVED   1
 Event ID for the event indicating that an object was removed. More...
 
#define LIBTIEPIE_EVENTID_SCP_DATAREADY   2
 Event ID for the event indicating that the oscilloscope measurement is ready. More...
 
#define LIBTIEPIE_EVENTID_SCP_DATAOVERFLOW   3
 Event ID for the event indicating that the data overflow occurred during a streaming measurement. More...
 
#define LIBTIEPIE_EVENTID_SCP_CONNECTIONTESTCOMPLETED   4
 Event ID for the event indicating that the connection test is ready. More...
 
#define LIBTIEPIE_EVENTID_SCP_TRIGGERED   5
 Event ID for the event indicating that the oscilloscope has triggered. More...
 
#define LIBTIEPIE_EVENTID_GEN_BURSTCOMPLETED   6
 Event ID for the event indicating that the generator burst is completed. More...
 
#define LIBTIEPIE_EVENTID_GEN_CONTROLLABLECHANGED   7
 Event ID for the event indicating that the generator controllable state has changed. More...
 
#define LIBTIEPIE_EVENTID_SRV_STATUSCHANGED   8
 XXX. More...
 
#define LIBTIEPIE_EVENTID_SCP_SAFEGROUNDERROR   9
 Event ID for the event indicating that the oscilloscope channel SafeGround was disabled because of a too large ground current. The value parameter of the event contains the channel number (0 to ChannelCount-1). More...
 
#define TPVERSION_MAJOR(x)   ( x >> 48 )
 Extract the major number from a TpVersion_t value. More...
 
#define TPVERSION_MINOR(x)   ( ( x >> 32 ) & 0xffff )
 Extract the minor number from a TpVersion_t value. More...
 
#define TPVERSION_RELEASE(x)   ( ( x >> 16 ) & 0xffff )
 Extract the release number from a TpVersion_t value. More...
 
#define TPVERSION_BUILD(x)   ( x & 0xffff )
 Extract the build number from a TpVersion_t value. More...
 
#define TPDATE_YEAR(x)   ( x >> 16 )
 Extract year from a TpDate_t value. More...
 
#define TPDATE_MONTH(x)   ( ( x >> 8 ) & 0xff )
 Extract month from a TpDate_t value. More...
 
#define TPDATE_DAY(x)   ( x & 0xff )
 Extract day from a TpDate_t value. More...
 
#define TRIGGER_IO_ID(pgid, sgid, fid)   ( ( DN_MAIN << TIOID_SHIFT_DN ) | ( ( pgid ) << TIOID_SHIFT_PGID ) | ( ( sgid ) << TIOID_SHIFT_SGID ) | ( ( fid ) << TIOID_SHIFT_FID ) )
 
#define COMBI_TRIGGER_IO_ID(dn, tiid)   ( ( ( dn ) << TIOID_SHIFT_DN ) | ( ( tiid ) & ( ( 1 << TIOID_SHIFT_DN ) - 1 ) ) )
 
#define WM_LIBTIEPIE   ( WM_USER + 1337 )
 Message number offset used by LibTiePie. More...
 
#define WM_LIBTIEPIE_LST_DEVICEADDED   ( WM_LIBTIEPIE + 2 )
 
#define WM_LIBTIEPIE_LST_DEVICEREMOVED   ( WM_LIBTIEPIE + 3 )
 
#define WM_LIBTIEPIE_LST_DEVICECANOPENCHANGED   ( WM_LIBTIEPIE + 9 )
 
#define WM_LIBTIEPIE_DEV_REMOVED   ( WM_LIBTIEPIE + 4 )
 
#define WM_LIBTIEPIE_SCP_DATAREADY   ( WM_LIBTIEPIE + 0 )
 
#define WM_LIBTIEPIE_SCP_DATAOVERFLOW   ( WM_LIBTIEPIE + 1 )
 
#define WM_LIBTIEPIE_SCP_CONNECTIONTESTCOMPLETED   ( WM_LIBTIEPIE + 7 )
 
#define WM_LIBTIEPIE_SCP_TRIGGERED   ( WM_LIBTIEPIE + 8 )
 
#define WM_LIBTIEPIE_GEN_BURSTCOMPLETED   ( WM_LIBTIEPIE + 5 )
 
#define WM_LIBTIEPIE_GEN_CONTROLLABLECHANGED   ( WM_LIBTIEPIE + 6 )
 
#define WM_LIBTIEPIE_EVENT   ( WM_LIBTIEPIE + 10 )
 

Typedefs

typedef int32_t LibTiePieStatus_t
 LibTiePie status code. More...
 
typedef uint32_t LibTiePieHandle_t
 Generic handle. More...
 
typedef LibTiePieHandle_t TpDeviceHandle_t
 
typedef uint64_t TpVersion_t
 Data type representing a version number. More...
 
typedef uint32_t TpDate_t
 Data type representing a date. More...
 
typedef uint8_t bool8_t
 Boolean value one byte wide. More...
 
typedef uint8_t LibTiePieTriState_t
 TriState value one byte wide. More...
 
typedef void ** LibTiePiePointerArray_t
 Pointer array. More...
 
typedef void(* TpCallback_t) (void *pData)
 
typedef void(* TpCallbackDeviceList_t) (void *pData, uint32_t dwDeviceTypes, uint32_t dwSerialNumber)
 
typedef void(* TpCallbackHandle_t) (void *pData, LibTiePieHandle_t hHandle)
 
typedef void(* TpCallbackEvent_t) (void *pData, uint32_t dwEvent, uint32_t dwValue)
 

Functions

void LibInit (void)
 Create and initialize internal resources used by the library. More...
 
bool8_t LibIsInitialized (void)
 Check whether the library's internal resources are initialized. More...
 
void LibExit (void)
 Clear and free internal resources used by the library. More...
 
TpVersion_t LibGetVersion (void)
 Get the library version number. More...
 
const char * LibGetVersionExtra (void)
 Get the library version postfix. More...
 
uint32_t LibGetConfig (uint8_t *pBuffer, uint32_t dwBufferLength)
 Get the library configuration number. More...
 
LibTiePieStatus_t LibGetLastStatus (void)
 Get the last status value. More...
 
const char * LibGetLastStatusStr (void)
 Get the last status value as text. More...
 
void LstUpdate (void)
 Update the device list. More...
 
uint32_t LstGetCount (void)
 Get the number of devices in the device list. More...
 
LibTiePieHandle_t LstOpenDevice (uint32_t dwIdKind, uint32_t dwId, uint32_t dwDeviceType)
 Open a device and get a handle to the device. More...
 
LibTiePieHandle_t LstOpenOscilloscope (uint32_t dwIdKind, uint32_t dwId)
 Open an oscilloscope and get a handle to the oscilloscope. More...
 
LibTiePieHandle_t LstOpenGenerator (uint32_t dwIdKind, uint32_t dwId)
 Open a generator and get a handle to the generator. More...
 
LibTiePieHandle_t LstOpenI2CHost (uint32_t dwIdKind, uint32_t dwId)
 Open an I2C host and get a handle to the I2C host. More...
 
uint32_t LstCreateCombinedDevice (const LibTiePieHandle_t *pDeviceHandles, uint32_t dwCount)
 Create a combined instrument. More...
 
LibTiePieHandle_t LstCreateAndOpenCombinedDevice (const LibTiePieHandle_t *pDeviceHandles, uint32_t dwCount)
 Create and open a combined instrument. More...
 
void LstRemoveDevice (uint32_t dwSerialNumber)
 Remove an instrument from the device list so it can be used by other applications. More...
 
bool8_t LstDevCanOpen (uint32_t dwIdKind, uint32_t dwId, uint32_t dwDeviceType)
 Check whether the listed device can be opened. More...
 
uint32_t LstDevGetProductId (uint32_t dwIdKind, uint32_t dwId)
 Get the product id of the listed device. More...
 
uint32_t LstDevGetName (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength)
 Get the full name of the listed device. More...
 
uint32_t LstDevGetNameShort (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength)
 Get the short name of the listed device. More...
 
uint32_t LstDevGetNameShortest (uint32_t dwIdKind, uint32_t dwId, char *pBuffer, uint32_t dwBufferLength)
 Get the short name of the listed device wihout model postfix. More...
 
TpVersion_t LstDevGetDriverVersion (uint32_t dwIdKind, uint32_t dwId)
 Get the version number of the driver currently used by the listed device. More...
 
TpVersion_t LstDevGetRecommendedDriverVersion (uint32_t dwIdKind, uint32_t dwId)
 Get the version number of the recommended driver for the listed device. More...
 
TpVersion_t LstDevGetFirmwareVersion (uint32_t dwIdKind, uint32_t dwId)
 Get the version number of the firmware currently used by the listed device. More...
 
TpDate_t LstDevGetCalibrationDate (uint32_t dwIdKind, uint32_t dwId)
 Get the calibration date of the listed device. More...
 
uint32_t LstDevGetSerialNumber (uint32_t dwIdKind, uint32_t dwId)
 Get the serial number of the listed device. More...
 
uint32_t LstDevGetTypes (uint32_t dwIdKind, uint32_t dwId)
 Get the device types of the listed device. More...
 
uint32_t LstDevGetContainedSerialNumbers (uint32_t dwIdKind, uint32_t dwId, uint32_t *pBuffer, uint32_t dwBufferLength)
 Get the serial numbers of the individual devices contained in a combined device. More...
 
uint32_t LstCbDevGetProductId (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
 Get the product id of a device contained in a combined device. More...
 
uint32_t LstCbDevGetName (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength)
 Get the full name of a device contained in a combined device. More...
 
uint32_t LstCbDevGetNameShort (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength)
 Get the short name of a device contained in a combined device. More...
 
uint32_t LstCbDevGetNameShortest (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber, char *pBuffer, uint32_t dwBufferLength)
 Get the short name without model postfix of a device contained in a combined device. More...
 
TpVersion_t LstCbDevGetDriverVersion (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
 Get the driver version of a device contained in a combined device. More...
 
TpVersion_t LstCbDevGetFirmwareVersion (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
 Get the firmware version of a device contained in a combined device. More...
 
TpDate_t LstCbDevGetCalibrationDate (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
 Get the calibration date of a device contained in a combined device. More...
 
uint16_t LstCbScpGetChannelCount (uint32_t dwIdKind, uint32_t dwId, uint32_t dwContainedDeviceSerialNumber)
 Get the channel count of an oscilloscope contained in a combined oscilloscope. More...
 
void LstSetCallbackDeviceAdded (TpCallbackDeviceList_t pCallback, void *pData)
 Set a callback function which is called when a device is added to the device list. More...
 
void LstSetCallbackDeviceRemoved (TpCallbackDeviceList_t pCallback, void *pData)
 Set a callback function which is called when a device is removed from the device list. More...
 
void LstSetCallbackDeviceCanOpenChanged (TpCallbackDeviceList_t pCallback, void *pData)
 Set a callback function which is called when the device can open property changes. More...
 
void LstSetEventDeviceAdded (int fdEvent)
 Set an event file descriptor which is set when a device is added to the device list. More...
 
void LstSetEventDeviceRemoved (int fdEvent)
 Set an event file descriptor which is set when a device is removed from the device list. More...
 
void LstSetEventDeviceCanOpenChanged (int fdEvent)
 Set an event file descriptor which is set when the device can open property changes. More...
 
void LstSetEventDeviceAdded (HANDLE hEvent)
 Set an event object handle which is set when a device is added to the device list. More...
 
void LstSetEventDeviceRemoved (HANDLE hEvent)
 Set an event object handle which is set when a device is removed from the device list. More...
 
void LstSetEventDeviceCanOpenChanged (HANDLE hEvent)
 Set an event object handle which is set when the device can open property changes. More...
 
void LstSetMessageDeviceAdded (HWND hWnd)
 Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEADDED message is sent when a device is added to the device list. More...
 
void LstSetMessageDeviceRemoved (HWND hWnd)
 Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEREMOVED message is sent when a device is removed from the device list. More...
 
void LstSetMessageDeviceCanOpenChanged (HWND hWnd)
 Set a window handle to which a WM_LIBTIEPIE_LST_DEVICEREMOVED message is sent when the device can open property changes. More...
 
void ObjClose (LibTiePieHandle_t hHandle)
 Close a object. More...
 
bool8_t ObjIsRemoved (LibTiePieHandle_t hHandle)
 Check whether an object is removed. More...
 
uint64_t ObjGetInterfaces (LibTiePieHandle_t hHandle)
 Check which interface are supported by the specified object. More...
 
void ObjSetEventCallback (LibTiePieHandle_t hHandle, TpCallbackEvent_t pCallback, void *pData)
 Set a callback function which is called when an event occurs. More...
 
bool8_t ObjGetEvent (LibTiePieHandle_t hHandle, uint32_t *pEvent, uint32_t *pValue)
 Get an event form the event queue. More...
 
void ObjSetEventEvent (LibTiePieHandle_t hHandle, int fdEvent)
 Set an event file descriptor which is set when an event occurs. More...
 
void ObjSetEventEvent (LibTiePieHandle_t hHandle, HANDLE hEvent)
 Set an event object handle which is set when an event occurs. More...
 
void ObjSetEventWindowHandle (LibTiePieHandle_t hHandle, HWND hWnd)
 Set a window handle to which a WM_LIBTIEPIE_EVENT message is sent when an event occurs. More...
 
void DevClose (LibTiePieHandle_t hDevice)
 Close a device. More...
 
bool8_t DevIsRemoved (LibTiePieHandle_t hDevice)
 Check whether a device is removed. More...
 
TpVersion_t DevGetDriverVersion (LibTiePieHandle_t hDevice)
 Get the version number of the driver used by the device. More...
 
TpVersion_t DevGetFirmwareVersion (LibTiePieHandle_t hDevice)
 Get the version number of the firmware used by the device. More...
 
TpDate_t DevGetCalibrationDate (LibTiePieHandle_t hDevice)
 Get the calibration date of the device. More...
 
uint32_t DevGetSerialNumber (LibTiePieHandle_t hDevice)
 Get the serial number of the device. More...
 
uint32_t DevGetProductId (LibTiePieHandle_t hDevice)
 Get the product id of the device. More...
 
uint32_t DevGetType (LibTiePieHandle_t hDevice)
 Get the device type. More...
 
uint32_t DevGetName (LibTiePieHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength)
 Get the full name of the device. More...
 
uint32_t DevGetNameShort (LibTiePieHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength)
 Get the short name of the device. More...
 
uint32_t DevGetNameShortest (LibTiePieHandle_t hDevice, char *pBuffer, uint32_t dwBufferLength)
 Get the short name of the device without model postfix. More...
 
void DevSetCallbackRemoved (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
 Set a callback function which is called when the device is removed. More...
 
void DevSetEventRemoved (LibTiePieHandle_t hDevice, int fdEvent)
 Set an event file descriptor which is set when the device is removed. More...
 
void DevSetEventRemoved (LibTiePieHandle_t hDevice, HANDLE hEvent)
 Set an event object handle which is set when the device is removed. More...
 
void DevSetMessageRemoved (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
 Set a window handle to which a WM_LIBTIEPIE_DEV_REMOVED message is sent when the device is removed. More...
 
uint16_t DevTrGetInputCount (LibTiePieHandle_t hDevice)
 Get the number of trigger inputs. More...
 
uint16_t DevTrGetInputIndexById (LibTiePieHandle_t hDevice, uint32_t dwId)
 Get the index of a trigger input identified by its ID. More...
 
bool8_t ScpTrInIsTriggered (LibTiePieHandle_t hDevice, uint16_t wInput)
 Check whether the trigger input caused a trigger. More...
 
bool8_t DevTrInGetEnabled (LibTiePieHandle_t hDevice, uint16_t wInput)
 Check whether a device trigger input is enabled. More...
 
bool8_t DevTrInSetEnabled (LibTiePieHandle_t hDevice, uint16_t wInput, bool8_t bEnable)
 To select a device trigger input as trigger source, set trigger input enabled. More...
 
uint64_t DevTrInGetKinds (LibTiePieHandle_t hDevice, uint16_t wInput)
 Get the supported trigger kinds for a specified device trigger input. More...
 
uint64_t DevTrInGetKind (LibTiePieHandle_t hDevice, uint16_t wInput)
 Get the currently selected trigger kind for a specified device trigger input. More...
 
uint64_t DevTrInSetKind (LibTiePieHandle_t hDevice, uint16_t wInput, uint64_t qwKind)
 Set the required trigger kind for a specified device trigger input. More...
 
bool8_t DevTrInIsAvailable (LibTiePieHandle_t hDevice, uint16_t wInput)
 Check whether a device trigger input is available. More...
 
uint32_t DevTrInGetId (LibTiePieHandle_t hDevice, uint16_t wInput)
 Get the id of a specified device trigger input. More...
 
uint32_t DevTrInGetName (LibTiePieHandle_t hDevice, uint16_t wInput, char *pBuffer, uint32_t dwBufferLength)
 Get the name of a specified device trigger input. More...
 
uint16_t DevTrGetOutputCount (LibTiePieHandle_t hDevice)
 Get the number of trigger outputs. More...
 
uint16_t DevTrGetOutputIndexById (LibTiePieHandle_t hDevice, uint32_t dwId)
 Get the index of trigger output identified by its ID. More...
 
bool8_t DevTrOutGetEnabled (LibTiePieHandle_t hDevice, uint16_t wOutput)
 Check whether a trigger output is enabled. More...
 
bool8_t DevTrOutSetEnabled (LibTiePieHandle_t hDevice, uint16_t wOutput, bool8_t bEnable)
 Set trigger output enable. More...
 
uint64_t DevTrOutGetEvents (LibTiePieHandle_t hDevice, uint16_t wOutput)
 Get the supported trigger output events for a specified device trigger output. More...
 
uint64_t DevTrOutGetEvent (LibTiePieHandle_t hDevice, uint16_t wOutput)
 Get the currently selected trigger output event for a specified device trigger output. More...
 
uint64_t DevTrOutSetEvent (LibTiePieHandle_t hDevice, uint16_t wOutput, uint64_t qwEvent)
 Set the trigger output event for a specified device trigger output. More...
 
uint32_t DevTrOutGetId (LibTiePieHandle_t hDevice, uint16_t wOutput)
 Get the id of a specified device trigger output. More...
 
uint32_t DevTrOutGetName (LibTiePieHandle_t hDevice, uint16_t wOutput, char *pBuffer, uint32_t dwBufferLength)
 Get the name of a specified device trigger output. More...
 
bool8_t DevTrOutTrigger (LibTiePieHandle_t hDevice, uint16_t wOutput)
 Trigger the specified device trigger output. More...
 
uint16_t ScpGetChannelCount (LibTiePieHandle_t hDevice)
 Get the number of channels. More...
 
bool8_t ScpChIsAvailable (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether the channel is available. More...
 
uint32_t ScpChGetConnectorType (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the channel connector type. More...
 
bool8_t ScpChIsDifferential (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether the channel has a differential input. More...
 
double ScpChGetImpedance (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the channel input impedance. More...
 
uint32_t ScpChGetBandwidths (LibTiePieHandle_t hDevice, uint16_t wCh, double *pList, uint32_t dwLength)
 Get the supported input bandwidths for a specified channel. More...
 
double ScpChGetBandwidth (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the current channel input bandwidth. More...
 
double ScpChSetBandwidth (LibTiePieHandle_t hDevice, uint16_t wCh, double dBandwidth)
 Set the channel input bandwidth. More...
 
uint64_t ScpChGetCouplings (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the supported coupling kinds of a specified channel. More...
 
uint64_t ScpChGetCoupling (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the currently set coupling of a specified channel. More...
 
uint64_t ScpChSetCoupling (LibTiePieHandle_t hDevice, uint16_t wCh, uint64_t qwCoupling)
 Set the coupling of a specified channel. More...
 
bool8_t ScpChGetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether a specified channel is currently enabled. More...
 
bool8_t ScpChSetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
 Set channel enable. More...
 
double ScpChGetProbeGain (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the currently set channel probe gain for a specified channel. More...
 
double ScpChSetProbeGain (LibTiePieHandle_t hDevice, uint16_t wCh, double dProbeGain)
 Set the channel probe gain for a specified channel. More...
 
double ScpChGetProbeOffset (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the currently set channel probe offset for a specified channel. More...
 
double ScpChSetProbeOffset (LibTiePieHandle_t hDevice, uint16_t wCh, double dProbeOffset)
 Set the channel probe offset for a specified channel. More...
 
bool8_t ScpChGetAutoRanging (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether auto ranging is enabled for a specified channel. More...
 
bool8_t ScpChSetAutoRanging (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
 Set auto ranging for a specified channel. More...
 
uint32_t ScpChGetRanges (LibTiePieHandle_t hDevice, uint16_t wCh, double *pList, uint32_t dwLength)
 Get the supported input ranges for a specified channel, with the currently selected coupling. More...
 
double ScpChGetRange (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the currently selected input range for a specified channel. More...
 
double ScpChSetRange (LibTiePieHandle_t hDevice, uint16_t wCh, double dRange)
 Set the input range for a specified channel. More...
 
bool8_t ScpChHasSafeGround (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether the specified channel has SafeGround. More...
 
bool8_t ScpChGetSafeGroundEnabled (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether SafeGround is enabled for a specified channel. More...
 
bool8_t ScpChSetSafeGroundEnabled (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
 Enable or disable SafeGround for a specified channel. More...
 
double ScpChGetSafeGroundThresholdMin (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the minimum SafeGround threshold current for the specified channel. More...
 
double ScpChGetSafeGroundThresholdMax (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the maximum SafeGround threshold current for the specified channel. More...
 
double ScpChGetSafeGroundThreshold (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the actual SafeGround threshold current for the specified channel. More...
 
double ScpChSetSafeGroundThreshold (LibTiePieHandle_t hDevice, uint16_t wCh, double dThreshold)
 Set the SafeGround threshold current for the specified channel. More...
 
bool8_t ScpChHasTrigger (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether the specified channel has trigger support with the currently selected measure mode. More...
 
bool8_t ScpChTrIsAvailable (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether the channel trigger for the specified channel is available, with the current oscilloscope settings. More...
 
bool8_t ScpChTrIsTriggered (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether the channel trigger caused a trigger. More...
 
bool8_t ScpChTrGetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether channel trigger for a specified channel is enabled. More...
 
bool8_t ScpChTrSetEnabled (LibTiePieHandle_t hDevice, uint16_t wCh, bool8_t bEnable)
 To select a channel as trigger source, set channel trigger enable. More...
 
uint64_t ScpChTrGetKinds (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the supported channel trigger kinds for a specified channel with the currently selected measure mode. More...
 
uint64_t ScpChTrGetKind (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the currently selected channel trigger kind for a specified channel. More...
 
uint64_t ScpChTrSetKind (LibTiePieHandle_t hDevice, uint16_t wCh, uint64_t qwTriggerKind)
 Set the channel trigger kind for a specified channel. More...
 
uint32_t ScpChTrGetLevelModes (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the supported trigger level modes of a specified channel. More...
 
uint32_t ScpChTrGetLevelMode (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the current trigger level mode of a specified channel. More...
 
uint32_t ScpChTrSetLevelMode (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwLevelMode)
 Set the trigger level mode of a specified channel. More...
 
uint32_t ScpChTrGetLevelCount (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the number of channel trigger levels for a specified channel with the currently selected trigger kind. More...
 
double ScpChTrGetLevel (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex)
 Get the currently set channel trigger level value for a specified channel and trigger level. More...
 
double ScpChTrSetLevel (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dLevel)
 Set the channel trigger level value for a specified channel and trigger level. More...
 
uint32_t ScpChTrGetHysteresisCount (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the number of trigger hystereses for a specified channel with the currently selected trigger kind. More...
 
double ScpChTrGetHysteresis (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex)
 Get the currently set channel trigger hysteresis value for a specified channel and trigger hysteresis. More...
 
double ScpChTrSetHysteresis (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dHysteresis)
 Set the channel trigger hysteresis value for a specified channel and trigger hysteresis. More...
 
uint32_t ScpChTrGetConditions (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the supported trigger conditions for a specified channel with the currently selected trigger kind. More...
 
uint32_t ScpChTrGetCondition (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the current selected trigger condition for a specified channel. More...
 
uint32_t ScpChTrSetCondition (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwCondition)
 Set the trigger condition for a specified channel. More...
 
uint32_t ScpChTrGetTimeCount (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the number of trigger times for the current trigger kind and trigger condition. More...
 
double ScpChTrGetTime (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex)
 Get the current trigger time value for a specified channel and trigger type. More...
 
double ScpChTrSetTime (LibTiePieHandle_t hDevice, uint16_t wCh, uint32_t dwIndex, double dTime)
 Set the required trigger time value for a specified channel and trigger type. More...
 
uint64_t ScpGetData (LibTiePieHandle_t hDevice, float **pBuffers, uint16_t wChannelCount, uint64_t qwStartIndex, uint64_t qwSampleCount)
 Get the measurement data for specified channels. More...
 
uint64_t ScpGetData1Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, uint64_t qwStartIndex, uint64_t qwSampleCount)
 Get the measurement data for the first channel. More...
 
uint64_t ScpGetData2Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, uint64_t qwStartIndex, uint64_t qwSampleCount)
 Get the measurement data for the first two channels. More...
 
uint64_t ScpGetData3Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, float *pBufferCh3, uint64_t qwStartIndex, uint64_t qwSampleCount)
 Get the measurement data for the first three channels. More...
 
uint64_t ScpGetData4Ch (LibTiePieHandle_t hDevice, float *pBufferCh1, float *pBufferCh2, float *pBufferCh3, float *pBufferCh4, uint64_t qwStartIndex, uint64_t qwSampleCount)
 Get the measurement data for the first four channels. More...
 
uint64_t ScpGetValidPreSampleCount (LibTiePieHandle_t hDevice)
 Get the number of valid pre samples in the measurement. More...
 
void ScpChGetDataValueRange (LibTiePieHandle_t hDevice, uint16_t wCh, double *pMin, double *pMax)
 Get the minimum and maximum values of the input range the current data was measured with. More...
 
double ScpChGetDataValueMin (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the minimum value of the input range the current data was measured with. More...
 
double ScpChGetDataValueMax (LibTiePieHandle_t hDevice, uint16_t wCh)
 Get the maximum value of the input range the current data was measured with. More...
 
void ScpSetCallbackDataReady (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
 Set a callback function which is called when the oscilloscope has new measurement data ready. More...
 
void ScpSetCallbackDataOverflow (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
 Set a callback function which is called when the oscilloscope streaming measurement caused an data overflow. More...
 
void ScpSetCallbackConnectionTestCompleted (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
 Set a callback function which is called when the oscilloscope connection test is completed. More...
 
void ScpSetCallbackTriggered (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
 Set a callback function which is called when the oscilloscope is triggered. More...
 
void ScpSetEventDataReady (LibTiePieHandle_t hDevice, int fdEvent)
 Set an event file descriptor which is set when the oscilloscope has new measurement data ready. More...
 
void ScpSetEventDataOverflow (LibTiePieHandle_t hDevice, int fdEvent)
 Set an event file descriptor which is set when the oscilloscope streaming measurement caused an data overflow. More...
 
void ScpSetEventConnectionTestCompleted (LibTiePieHandle_t hDevice, int fdEvent)
 Set an event file descriptor which is set when the oscilloscope connection test is completed. More...
 
void ScpSetEventTriggered (LibTiePieHandle_t hDevice, int fdEvent)
 Set an event file descriptor which is set when the oscilloscope is triggered. More...
 
void ScpSetEventDataReady (LibTiePieHandle_t hDevice, HANDLE hEvent)
 Set an event object handle which is set when the oscilloscope has new measurement data ready. More...
 
void ScpSetEventDataOverflow (LibTiePieHandle_t hDevice, HANDLE hEvent)
 Set an event object handle which is set when the oscilloscope streaming measurement caused an data overflow. More...
 
void ScpSetEventConnectionTestCompleted (LibTiePieHandle_t hDevice, HANDLE hEvent)
 Set an event object handle which is set when the oscilloscope connection test is completed. More...
 
void ScpSetEventTriggered (LibTiePieHandle_t hDevice, HANDLE hEvent)
 Set an event object handle which is set when the oscilloscope is triggered. More...
 
void ScpSetMessageDataReady (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
 Set a window handle to which a WM_LIBTIEPIE_SCP_DATAREADY message is sent when the oscilloscope has new measurement data ready. More...
 
void ScpSetMessageDataOverflow (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
 Set a window handle to which a WM_LIBTIEPIE_SCP_DATAOVERFLOW message is sent when the oscilloscope streaming measurement caused an data overflow. More...
 
void ScpSetMessageConnectionTestCompleted (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
 Set a window handle to which a WM_LIBTIEPIE_SCP_CONNECTIONTESTCOMPLETED message is sent when the oscilloscope connection test is completed. More...
 
void ScpSetMessageTriggered (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
 Set a window handle to which a WM_LIBTIEPIE_SCP_TRIGGERED message is sent when the oscilloscope is triggered. More...
 
bool8_t ScpStart (LibTiePieHandle_t hDevice)
 Start a single measurement. More...
 
bool8_t ScpStop (LibTiePieHandle_t hDevice)
 Stop a running measurement. More...
 
bool8_t ScpForceTrigger (LibTiePieHandle_t hDevice)
 Force a trigger. More...
 
uint32_t ScpGetMeasureModes (LibTiePieHandle_t hDevice)
 Get the supported measure modes for a specified oscilloscope. More...
 
uint32_t ScpGetMeasureMode (LibTiePieHandle_t hDevice)
 Get the current measure mode. More...
 
uint32_t ScpSetMeasureMode (LibTiePieHandle_t hDevice, uint32_t dwMeasureMode)
 Set the measure mode. More...
 
bool8_t ScpIsRunning (LibTiePieHandle_t hDevice)
 Check whether the oscilloscope is currently measuring. More...
 
bool8_t ScpIsTriggered (LibTiePieHandle_t hDevice)
 Check whether the oscilloscope has triggered. More...
 
bool8_t ScpIsTimeOutTriggered (LibTiePieHandle_t hDevice)
 Check whether the trigger was caused by the trigger time out. More...
 
bool8_t ScpIsForceTriggered (LibTiePieHandle_t hDevice)
 Check whether the trigger was caused by ScpForceTrigger. More...
 
bool8_t ScpIsDataReady (LibTiePieHandle_t hDevice)
 Check whether new, unread measured data is available. More...
 
bool8_t ScpIsDataOverflow (LibTiePieHandle_t hDevice)
 Check whether a data overflow has occurred. More...
 
uint32_t ScpGetAutoResolutionModes (LibTiePieHandle_t hDevice)
 Get the supported auto resolution modes of the specified oscilloscope. More...
 
uint32_t ScpGetAutoResolutionMode (LibTiePieHandle_t hDevice)
 Get the current auto resolution mode of the specified oscilloscope. More...
 
uint32_t ScpSetAutoResolutionMode (LibTiePieHandle_t hDevice, uint32_t dwAutoResolutionMode)
 Set the auto resolution mode of the specified oscilloscope. More...
 
uint32_t ScpGetResolutions (LibTiePieHandle_t hDevice, uint8_t *pList, uint32_t dwLength)
 Get an array with the supported resolutions of the specified oscilloscope. More...
 
uint8_t ScpGetResolution (LibTiePieHandle_t hDevice)
 Get the current resolution of the specified oscilloscope. More...
 
uint8_t ScpSetResolution (LibTiePieHandle_t hDevice, uint8_t byResolution)
 Set the resolution of the specified oscilloscope. More...
 
bool8_t ScpIsResolutionEnhanced (LibTiePieHandle_t hDevice)
 Check whether the currently selected resolution is enhanced or a native resolution of the hardware. More...
 
uint32_t ScpGetClockSources (LibTiePieHandle_t hDevice)
 Get the supported clock sources of the specified oscilloscope. More...
 
uint32_t ScpGetClockSource (LibTiePieHandle_t hDevice)
 Get the currently selected clock source of the specified oscilloscope. More...
 
uint32_t ScpSetClockSource (LibTiePieHandle_t hDevice, uint32_t dwClockSource)
 Set the clock source of the specified oscilloscope. More...
 
uint32_t ScpGetClockSourceFrequencies (LibTiePieHandle_t hDevice, double *pList, uint32_t dwLength)
 Get an array with the supported clock source frequencies of the specified oscilloscope. More...
 
double ScpGetClockSourceFrequency (LibTiePieHandle_t hDevice)
 Get the current clock source frequency of the specified oscilloscope. More...
 
double ScpSetClockSourceFrequency (LibTiePieHandle_t hDevice, double dClockSourceFrequency)
 Set the clock source frequency of the specified oscilloscope. More...
 
uint32_t ScpGetClockOutputs (LibTiePieHandle_t hDevice)
 Get the supported clock outputs of the specified oscilloscope. More...
 
uint32_t ScpGetClockOutput (LibTiePieHandle_t hDevice)
 Get the currently selected clock output of the specified oscilloscope. More...
 
uint32_t ScpSetClockOutput (LibTiePieHandle_t hDevice, uint32_t dwClockOutput)
 Set the clock output of the specified oscilloscope. More...
 
uint32_t ScpGetClockOutputFrequencies (LibTiePieHandle_t hDevice, double *pList, uint32_t dwLength)
 Get an array with the supported clock output frequencies of the specified oscilloscope. More...
 
double ScpGetClockOutputFrequency (LibTiePieHandle_t hDevice)
 Get the current clock output frequency of the specified oscilloscope. More...
 
double ScpSetClockOutputFrequency (LibTiePieHandle_t hDevice, double dClockOutputFrequency)
 Set the clock output frequency of the specified oscilloscope. More...
 
double ScpGetSampleFrequencyMax (LibTiePieHandle_t hDevice)
 Get the maximum supported sample frequency of a specified oscilloscope. More...
 
double ScpGetSampleFrequency (LibTiePieHandle_t hDevice)
 Get the currently selected sample frequency of a specified oscilloscope. More...
 
double ScpSetSampleFrequency (LibTiePieHandle_t hDevice, double dSampleFrequency)
 Set the sample frequency of a specified oscilloscope. More...
 
uint64_t ScpGetRecordLengthMax (LibTiePieHandle_t hDevice)
 Get the maximum supported record length of a specified oscilloscope. More...
 
uint64_t ScpGetRecordLength (LibTiePieHandle_t hDevice)
 Get the currently selected record length of a specified oscilloscope. More...
 
uint64_t ScpSetRecordLength (LibTiePieHandle_t hDevice, uint64_t qwRecordLength)
 Set the record length of a specified oscilloscope. More...
 
double ScpGetPreSampleRatio (LibTiePieHandle_t hDevice)
 Get the current pre sample ratio of a specified oscilloscope. More...
 
double ScpSetPreSampleRatio (LibTiePieHandle_t hDevice, double dPreSampleRatio)
 Set the pre sample ratio of a specified oscilloscope. More...
 
uint32_t ScpGetSegmentCountMax (LibTiePieHandle_t hDevice)
 Get the maximum supported number of segments of a specified oscilloscope. More...
 
uint32_t ScpGetSegmentCount (LibTiePieHandle_t hDevice)
 Get the currently selected number of segments of a specified oscilloscope. More...
 
uint32_t ScpSetSegmentCount (LibTiePieHandle_t hDevice, uint32_t dwSegmentCount)
 Set the number of segments of a specified oscilloscope. More...
 
bool8_t ScpHasTrigger (LibTiePieHandle_t hDevice)
 Check whether the oscilloscope has trigger support with the currently selected measure mode. More...
 
double ScpGetTriggerTimeOut (LibTiePieHandle_t hDevice)
 Get the currently selected trigger time out in seconds, for a specified oscilloscope. More...
 
double ScpSetTriggerTimeOut (LibTiePieHandle_t hDevice, double dTimeOut)
 Set the trigger time out in seconds, for a specified oscilloscope. More...
 
bool8_t ScpHasTriggerDelay (LibTiePieHandle_t hDevice)
 Check whether the oscilloscope has trigger delay support with the currently selected measure mode. More...
 
double ScpGetTriggerDelayMax (LibTiePieHandle_t hDevice)
 Get the maximum trigger delay in seconds, for the currently selected measure mode and sample frequency. More...
 
double ScpGetTriggerDelay (LibTiePieHandle_t hDevice)
 Get the currently selected trigger delay in seconds, for a specified oscilloscope. More...
 
double ScpSetTriggerDelay (LibTiePieHandle_t hDevice, double dDelay)
 Set trigger delay in seconds, for a specified oscilloscope. More...
 
bool8_t ScpHasTriggerHoldOff (LibTiePieHandle_t hDevice)
 Check whether the oscilloscope has trigger hold off support with the currently selected measure mode. More...
 
uint64_t ScpGetTriggerHoldOffCountMax (LibTiePieHandle_t hDevice)
 Get the maximum trigger hold off count in samples, for a specified oscilloscope. More...
 
uint64_t ScpGetTriggerHoldOffCount (LibTiePieHandle_t hDevice)
 Get the trigger hold off count in samples, for a specified oscilloscope. More...
 
uint64_t ScpSetTriggerHoldOffCount (LibTiePieHandle_t hDevice, uint64_t qwTriggerHoldOffCount)
 Set the trigger hold off count in samples, for a specified oscilloscope. More...
 
bool8_t ScpHasConnectionTest (LibTiePieHandle_t hDevice)
 Check whether the specified oscilloscope supports connection testing. More...
 
bool8_t ScpChHasConnectionTest (LibTiePieHandle_t hDevice, uint16_t wCh)
 Check whether a specified channel of a specified oscilloscope supports connection testing. More...
 
bool8_t ScpStartConnectionTest (LibTiePieHandle_t hDevice)
 Perform a connection test on all enabled channels of a specified oscilloscope. More...
 
bool8_t ScpIsConnectionTestCompleted (LibTiePieHandle_t hDevice)
 Check whether the connection test on a specified oscilloscope is completed. More...
 
uint16_t ScpGetConnectionTestData (LibTiePieHandle_t hDevice, LibTiePieTriState_t *pBuffer, uint16_t wChannelCount)
 Get the connection test result data for a specified oscilloscope. More...
 
uint32_t GenGetConnectorType (LibTiePieHandle_t hDevice)
 Get the output connector type for a specified generator. More...
 
bool8_t GenIsDifferential (LibTiePieHandle_t hDevice)
 Check whether the output of a specified generator is differential. More...
 
double GenGetImpedance (LibTiePieHandle_t hDevice)
 Get the output impedance of a specified generator. More...
 
uint8_t GenGetResolution (LibTiePieHandle_t hDevice)
 Get the DAC resolution of a specified generator. More...
 
double GenGetOutputValueMin (LibTiePieHandle_t hDevice)
 Get the minimum output value of a specified generator. More...
 
double GenGetOutputValueMax (LibTiePieHandle_t hDevice)
 Get the maximum output value of a specified generator. More...
 
bool8_t GenIsControllable (LibTiePieHandle_t hDevice)
 Check whether a specified generator can be controlled. More...
 
bool8_t GenIsRunning (LibTiePieHandle_t hDevice)
 Check whether the generator is running. More...
 
uint32_t GenGetStatus (LibTiePieHandle_t hDevice)
 Get the current signal generation status of a specified generator. More...
 
bool8_t GenGetOutputOn (LibTiePieHandle_t hDevice)
 Check whether the output of a specified generator is enabled. More...
 
bool8_t GenSetOutputOn (LibTiePieHandle_t hDevice, bool8_t bOutputOn)
 Enable or disable the output of a specified generator. More...
 
bool8_t GenHasOutputInvert (LibTiePieHandle_t hDevice)
 Check whether the output of a specified generator can be inverted. More...
 
bool8_t GenGetOutputInvert (LibTiePieHandle_t hDevice)
 Check whether the output of a specified generator is inverted. More...
 
bool8_t GenSetOutputInvert (LibTiePieHandle_t hDevice, bool8_t bInvert)
 Enable or disable the output invert of a specified generator. More...
 
bool8_t GenStart (LibTiePieHandle_t hDevice)
 Start the signal generation of a specified generator. More...
 
bool8_t GenStop (LibTiePieHandle_t hDevice)
 Stop the signal generation of a specified generator. More...
 
uint32_t GenGetSignalTypes (LibTiePieHandle_t hDevice)
 Get the supported signal types of a specified generator. More...
 
uint32_t GenGetSignalType (LibTiePieHandle_t hDevice)
 Get the currently selected signal type of a specified generator. More...
 
uint32_t GenSetSignalType (LibTiePieHandle_t hDevice, uint32_t dwSignalType)
 Set the signal type of a specified generator. More...
 
bool8_t GenHasAmplitude (LibTiePieHandle_t hDevice)
 Check whether the current signal type of a specified generator supports controlling the signal amplitude. More...
 
double GenGetAmplitudeMin (LibTiePieHandle_t hDevice)
 Get the minimum signal amplitude for the current signal type of a specified generator. More...
 
double GenGetAmplitudeMax (LibTiePieHandle_t hDevice)
 Get the maximum signal amplitude for the current signal type of a specified generator. More...
 
double GenGetAmplitude (LibTiePieHandle_t hDevice)
 Get the currently set signal amplitude of a specified generator. More...
 
double GenSetAmplitude (LibTiePieHandle_t hDevice, double dAmplitude)
 Set the signal amplitude of a specified generator. More...
 
uint32_t GenGetAmplitudeRanges (LibTiePieHandle_t hDevice, double *pList, uint32_t dwLength)
 Get the supported amplitude ranges for a specified generator. More...
 
double GenGetAmplitudeRange (LibTiePieHandle_t hDevice)
 Get the currently set amplitude range for a specified generator. More...
 
double GenSetAmplitudeRange (LibTiePieHandle_t hDevice, double dRange)
 Set the amplitude range for a specified generator. More...
 
bool8_t GenGetAmplitudeAutoRanging (LibTiePieHandle_t hDevice)
 Get the amplitude auto ranging setting for a specified generator. More...
 
bool8_t GenSetAmplitudeAutoRanging (LibTiePieHandle_t hDevice, bool8_t bEnable)
 Set the amplitude auto ranging setting for a specified generator. More...
 
bool8_t GenHasOffset (LibTiePieHandle_t hDevice)
 Check whether the current signal type of a specified generator supports controlling the signal offset. More...
 
double GenGetOffsetMin (LibTiePieHandle_t hDevice)
 Get the minimum offset for the current signal type, of a specified generator. More...
 
double GenGetOffsetMax (LibTiePieHandle_t hDevice)
 Get the maximum offset for the current signal type, of a specified generator. More...
 
double GenGetOffset (LibTiePieHandle_t hDevice)
 Get the current signal offset of a specified generator. More...
 
double GenSetOffset (LibTiePieHandle_t hDevice, double dOffset)
 Set the signal offset of a specified generator. More...
 
uint32_t GenGetFrequencyModes (LibTiePieHandle_t hDevice)
 Get the supported generator frequency modes of a specified generator. More...
 
uint32_t GenGetFrequencyMode (LibTiePieHandle_t hDevice)
 Get the current generator frequency mode of a specified generator. More...
 
uint32_t GenSetFrequencyMode (LibTiePieHandle_t hDevice, uint32_t dwFrequencyMode)
 Set the generator frequency mode of a specified generator. More...
 
bool8_t GenHasFrequency (LibTiePieHandle_t hDevice)
 Check whether the current signal type and frequency mode of a specified generator support controlling the signal/sample frequency. More...
 
double GenGetFrequencyMin (LibTiePieHandle_t hDevice)
 Get the minimum signal/sample frequency with the current frequency mode, of a specified generator. More...
 
double GenGetFrequencyMax (LibTiePieHandle_t hDevice)
 Get the maximum signal/sample frequency with the current frequency mode and signal type, of a specified generator. More...
 
double GenGetFrequency (LibTiePieHandle_t hDevice)
 Get the current signal/sample frequency, of a specified generator. More...
 
double GenSetFrequency (LibTiePieHandle_t hDevice, double dFrequency)
 Set signal/sample frequency, of a specified generator. More...
 
bool8_t GenHasPhase (LibTiePieHandle_t hDevice)
 Check whether the specified generator and the current signal type of the specified generator support controlling the signal phase. More...
 
double GenGetPhaseMin (LibTiePieHandle_t hDevice)
 Get the minimum signal phase of a specified generator. More...
 
double GenGetPhaseMax (LibTiePieHandle_t hDevice)
 Get the maximum signal phase of a specified generator. More...
 
double GenGetPhase (LibTiePieHandle_t hDevice)
 Get the current signal phase of a specified generator. More...
 
double GenSetPhase (LibTiePieHandle_t hDevice, double dPhase)
 Set the signal phase of a specified generator. More...
 
bool8_t GenHasSymmetry (LibTiePieHandle_t hDevice)
 Check whether the current signal type of a specified generator supports controlling the signal symmetry. More...
 
double GenGetSymmetryMin (LibTiePieHandle_t hDevice)
 Get the minimum signal symmetry of a specified generator. More...
 
double GenGetSymmetryMax (LibTiePieHandle_t hDevice)
 Get the maximum signal symmetry of a specified generator. More...
 
double GenGetSymmetry (LibTiePieHandle_t hDevice)
 Get the current signal symmetry of a specified generator. More...
 
double GenSetSymmetry (LibTiePieHandle_t hDevice, double dSymmetry)
 Set the signal symmetry of a specified generator. More...
 
bool8_t GenHasWidth (LibTiePieHandle_t hDevice)
 Check whether the current signal type of a specified generator supports controlling the signal pulse width. More...
 
double GenGetWidthMin (LibTiePieHandle_t hDevice)
 Get the minimum pulse width with the current signal frequency, of a specified generator. More...
 
double GenGetWidthMax (LibTiePieHandle_t hDevice)
 Get the maximum pulse width with the current signal frequency, of a specified generator. More...
 
double GenGetWidth (LibTiePieHandle_t hDevice)
 Get the current pulse width, of a specified generator. More...
 
double GenSetWidth (LibTiePieHandle_t hDevice, double dWidth)
 Set the pulse width, of a specified generator. More...
 
bool8_t GenHasEdgeTime (LibTiePieHandle_t hDevice)
 Check whether the current signal type of a specified generator supports controlling the edge times. More...
 
double GenGetLeadingEdgeTimeMin (LibTiePieHandle_t hDevice)
 Get the minimum leading edge time with the current pulse width and signal frequency, of a specified generator. More...
 
double GenGetLeadingEdgeTimeMax (LibTiePieHandle_t hDevice)
 Get the maximum leading edge time with the current pulse width and signal frequency, of a specified generator. More...
 
double GenGetLeadingEdgeTime (LibTiePieHandle_t hDevice)
 Get the current leading edge time with the current pulse width and signal frequency, of a specified generator. More...
 
double GenSetLeadingEdgeTime (LibTiePieHandle_t hDevice, double dLeadingEdgeTime)
 Set the leading edge time, of a specified generator. More...
 
double GenGetTrailingEdgeTimeMin (LibTiePieHandle_t hDevice)
 Get the minimum trailing edge time with the current pulse width and signal frequency, of a specified generator. More...
 
double GenGetTrailingEdgeTimeMax (LibTiePieHandle_t hDevice)
 Get the maximum trailing edge time with the current pulse width and signal frequency, of a specified generator. More...
 
double GenGetTrailingEdgeTime (LibTiePieHandle_t hDevice)
 Get the current trailing edge time with the current pulse width and signal frequency, of a specified generator. More...
 
double GenSetTrailingEdgeTime (LibTiePieHandle_t hDevice, double dTrailingEdgeTime)
 Set the trailing edge time, of a specified generator. More...
 
bool8_t GenHasData (LibTiePieHandle_t hDevice)
 Check whether the current signal type of a specified generator supports controlling the Arbitrary waveform buffer. More...
 
uint64_t GenGetDataLengthMin (LibTiePieHandle_t hDevice)
 Get the minimum length of the waveform buffer of a specified generator. More...
 
uint64_t GenGetDataLengthMax (LibTiePieHandle_t hDevice)
 Get the maximum length of the waveform buffer of a specified generator. More...
 
uint64_t GenGetDataLength (LibTiePieHandle_t hDevice)
 Get the length of the currently loaded waveform pattern of a specified generator. More...
 
void GenSetData (LibTiePieHandle_t hDevice, const float *pBuffer, uint64_t qwSampleCount)
 Load a waveform pattern into the waveform buffer of a specified generator. More...
 
uint64_t GenGetModes (LibTiePieHandle_t hDevice)
 Get the supported generator modes for the current signal type and frequency mode of a specified generator. More...
 
uint64_t GenGetModesNative (LibTiePieHandle_t hDevice)
 Get all supported generator modes of a specified generator, regardless of the signal type and frequency mode. More...
 
uint64_t GenGetMode (LibTiePieHandle_t hDevice)
 Get the current generator mode of a specified generator. More...
 
uint64_t GenSetMode (LibTiePieHandle_t hDevice, uint64_t qwGeneratorMode)
 Set the generator mode of a specified generator. More...
 
bool8_t GenIsBurstActive (LibTiePieHandle_t hDevice)
 Check whether a burst is active, of a specified generator. More...
 
uint64_t GenGetBurstCountMin (LibTiePieHandle_t hDevice)
 Get the minimum burst count for the current generator mode of a specified generator. More...
 
uint64_t GenGetBurstCountMax (LibTiePieHandle_t hDevice)
 Get the maximum burst count for the current generator mode of a specified generator. More...
 
uint64_t GenGetBurstCount (LibTiePieHandle_t hDevice)
 Get the current burst count for the current generator mode of a specified generator. More...
 
uint64_t GenSetBurstCount (LibTiePieHandle_t hDevice, uint64_t qwBurstCount)
 Set the burst count for the current generator mode of a specified generator. More...
 
uint64_t GenGetBurstSampleCountMin (LibTiePieHandle_t hDevice)
 Get the minimum burst sample count for the current generator mode of a specified generator. More...
 
uint64_t GenGetBurstSampleCountMax (LibTiePieHandle_t hDevice)
 Get the maximum burst sample count for the current generator mode of a specified generator. More...
 
uint64_t GenGetBurstSampleCount (LibTiePieHandle_t hDevice)
 Get the current burst sample count for the current generator mode of a specified generator. More...
 
uint64_t GenSetBurstSampleCount (LibTiePieHandle_t hDevice, uint64_t qwBurstSampleCount)
 Set the burst sample count for the current generator mode of a specified generator. More...
 
uint64_t GenGetBurstSegmentCountMin (LibTiePieHandle_t hDevice)
 Get the minimum burst segment count for the current settings of a specified generator. More...
 
uint64_t GenGetBurstSegmentCountMax (LibTiePieHandle_t hDevice)
 Get the maximum burst segment count for the current settings of a specified generator. More...
 
uint64_t GenGetBurstSegmentCount (LibTiePieHandle_t hDevice)
 Get the current burst segment count of a specified generator. More...
 
uint64_t GenSetBurstSegmentCount (LibTiePieHandle_t hDevice, uint64_t qwBurstSegmentCount)
 Set the burst segment count of a specified generator. More...
 
void GenSetCallbackBurstCompleted (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
 Set a callback function which is called when the generator burst is completed. More...
 
void GenSetEventBurstCompleted (LibTiePieHandle_t hDevice, int fdEvent)
 Set an event file descriptor which is set when the generator burst is completed. More...
 
void GenSetEventBurstCompleted (LibTiePieHandle_t hDevice, HANDLE hEvent)
 Set an event object handle which is set when the generator burst is completed. More...
 
void GenSetMessageBurstCompleted (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
 Set a window handle to which a WM_LIBTIEPIE_GEN_BURSTCOMPLETED message is sent when the generator burst is completed. More...
 
void GenSetCallbackControllableChanged (LibTiePieHandle_t hDevice, TpCallback_t pCallback, void *pData)
 Set a callback function which is called when the generator controllable property changes. More...
 
void GenSetEventControllableChanged (LibTiePieHandle_t hDevice, int fdEvent)
 Set an event file descriptor which is set when the generator controllable property changes. More...
 
void GenSetEventControllableChanged (LibTiePieHandle_t hDevice, HANDLE hEvent)
 Set event object handle which is set when the generator controllable property changes. More...
 
void GenSetMessageControllableChanged (LibTiePieHandle_t hDevice, HWND hWnd, WPARAM wParam, LPARAM lParam)
 Set window handle to which a WM_LIBTIEPIE_GEN_CONTROLLABLECHANGED message is sent when the generator controllable property changes. More...
 
bool8_t I2CIsInternalAddress (LibTiePieHandle_t hDevice, uint16_t wAddress)
 Check whether an address is used internally. More...
 
uint32_t I2CGetInternalAddresses (LibTiePieHandle_t hDevice, uint16_t *pAddresses, uint32_t dwLength)
 Get all addresses which are used internally. More...
 
bool8_t I2CRead (LibTiePieHandle_t hDevice, uint16_t wAddress, void *pBuffer, uint32_t dwSize, bool8_t bStop)
 Read data from a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CReadByte (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t *pValue)
 Read one byte from a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CReadWord (LibTiePieHandle_t hDevice, uint16_t wAddress, uint16_t *pValue)
 Read one word from a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CWrite (LibTiePieHandle_t hDevice, uint16_t wAddress, const void *pBuffer, uint32_t dwSize, bool8_t bStop)
 Write data to a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CWriteByte (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t byValue)
 Write one byte to a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CWriteByteByte (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t byValue1, uint8_t byValue2)
 Write two bytes to a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CWriteByteWord (LibTiePieHandle_t hDevice, uint16_t wAddress, uint8_t byValue1, uint16_t wValue2)
 Write one byte and one word to a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CWriteWord (LibTiePieHandle_t hDevice, uint16_t wAddress, uint16_t wValue)
 Write one word to a specified address on the I2C bus, using a specified I2C host. More...
 
bool8_t I2CWriteRead (LibTiePieHandle_t hDevice, uint16_t wAddress, const void *pWriteBuffer, uint32_t dwWriteSize, void *pReadBuffer, uint32_t dwReadSize)
 Write and read data to/from to a specified address on the I2C bus, using a specified I2C host. More...
 
double I2CGetSpeedMax (LibTiePieHandle_t hDevice)
 Get the maximum clock speed on the I2C bus controlled by a specified I2C host. More...
 
double I2CGetSpeed (LibTiePieHandle_t hDevice)
 Get the current clock speed on the I2C bus controlled by a specified I2C host. More...
 
double I2CSetSpeed (LibTiePieHandle_t hDevice, double dSpeed)
 Set the clock speed on the I2C bus controlled by a specified I2C host. More...
 
LibTiePiePointerArray_t HlpPointerArrayNew (uint32_t dwLength)
 Create a new pointer array. More...
 
void HlpPointerArraySet (LibTiePiePointerArray_t pArray, uint32_t dwIndex, void *pPointer)
 Set a pointer at a specified index in a specified pointer array. More...
 
void HlpPointerArrayDelete (LibTiePiePointerArray_t pArray)
 Delete an existing pointer array. More...
 

Detailed Description

Header for libtiepie.

Definition in file libtiepie.h.

Macro Definition Documentation

#define LIBTIEPIE_VERSION_MAJOR   0

Definition at line 59 of file libtiepie.h.

#define LIBTIEPIE_VERSION_MINOR   7

Definition at line 60 of file libtiepie.h.

#define LIBTIEPIE_VERSION_RELEASE   1

Definition at line 61 of file libtiepie.h.

#define LIBTIEPIE_VERSION_NUMBER   "0.7.1"

Definition at line 62 of file libtiepie.h.

#define LIBTIEPIE_VERSION   "0.7.1"

Definition at line 63 of file libtiepie.h.

#define LIBTIEPIE_REVISION   12259

Definition at line 64 of file libtiepie.h.