Sample frequency

This section contains all sample frequency related functions. More...

Functions
double	ScpGetSampleFrequencyMax (TpDeviceHandle_t hDevice)
	Get the maximum supported sample frequency of a specified device.
double	ScpGetSampleFrequency (TpDeviceHandle_t hDevice)
	Get the currently selected sample frequency.
double	ScpSetSampleFrequency (TpDeviceHandle_t hDevice, double dSampleFrequency)
	Set the sample frequency.

Detailed Description

This section contains all sample frequency related functions.

The rate at which samples are taken by the oscilloscope is called the sample frequency, the number of samples per second. A higher sample frequency corresponds to a shorter interval between the samples. With a higher sample frequency, the original signal can be reconstructed much better from the measured samples.

The maximum supported sample frequency depends on the used instrument and its configuration. Use ScpGetSampleFrequencyMax to determine the maximum supported sample frequency of a device.

By default the sample frequency is set to the highest value available.

Function Documentation

double ScpGetSampleFrequencyMax

(

TpDeviceHandle_t

hDevice

)

Get the maximum supported sample frequency of a specified device.

Parameters

hDevice

A device handle.

Returns

The maximum supported sample frequency, in Hz.

Since

0.4.0

double ScpGetSampleFrequency

(

TpDeviceHandle_t

hDevice

)

Get the currently selected sample frequency.

Parameters

hDevice

A device handle.

Returns

The currently selected sample frequency, in Hz.

Since

0.4.0

double ScpSetSampleFrequency	(	TpDeviceHandle_t	hDevice,
		double	dSampleFrequency
	)

Set the sample frequency.

Parameters

hDevice	A device handle.
dSampleFrequency	The required sample frequency, in Hz.

Returns

The actually selected sample frequency, in Hz.

Remarks

Changing the sample frequency may affect the record length, trigger time out, trigger delay and/or channel trigger time(s) value(s).

Changing the sample frequency may change the resolution if auto resolution mode is AR_NATIVEONLY or AR_ALL.

Since

0.4.0