libtiepie-hw  1.2.5

Functions for controlling the measure mode. More...

Collaboration diagram for Mode:

Functions

TIEPIE_HW_API uint32_t tiepie_hw_oscilloscope_get_measure_modes (tiepie_hw_handle handle)
 Get the supported measure modes for a specified oscilloscope. More...
 
TIEPIE_HW_API uint32_t tiepie_hw_oscilloscope_get_measure_mode (tiepie_hw_handle handle)
 Get the current measure mode. More...
 
TIEPIE_HW_API uint32_t tiepie_hw_oscilloscope_set_measure_mode (tiepie_hw_handle handle, uint32_t value)
 Set the measure mode. More...
 

Detailed Description

Functions for controlling the measure mode.

Oscilloscopes measure in block mode or in streaming mode. This is determined by the measure mode.

Block mode

When measuring in block mode (TIEPIE_HW_MM_BLOCK), the oscilloscope uses its internal memory to store the measured data. Once the pre defined number of samples is measured, measuring stops and the computer is notified that the measurement is ready. The computer can collect the data and can then start a new measurement. There will be gaps between consecutive measurements.

Advantage of block mode: Fast measurements using a high sample rate are possible. Disadvantage of block mode: Record length is limited by the instrument's memory size.

Streaming mode

When measuring in streaming mode (TIEPIE_HW_MM_STREAM), the measured data is transferred continuously to the computer and collected in a buffer, while the instrument remains measuring. When a pre defined number of samples has been collected in the buffer, libtiepie-hw will notify the calling application that a new chunk of data is available to be collected. The calling application can then get that chunk of data and add it to previously collected data. This makes it possible to perform long continuous measurements without gaps.

Advantage of streaming mode: very long measurements are posible. Disadvantage of streaming mode: the maximum sample rate is limited by number of enabled channels, the selected resolution, the data transfer rate to computer and the computer speed.

The size of the chunks is set using tiepie_hw_oscilloscope_set_record_length(). The combination of chunk size and sample rate determines the duration of a chunk and also the rate at wich chunks are measured and need to be transferred. When the computer can not keep up with the chunk rate and chunks are measured faster than the computer can process them, the running measurement will be stopped and tiepie_hw_oscilloscope_is_data_overflow() will return TIEPIE_HW_BOOL_TRUE and event callback will be triggered.

By default the measure mode is set to: Block mode (TIEPIE_HW_MM_BLOCK).

Function Documentation

◆ tiepie_hw_oscilloscope_get_measure_modes()

TIEPIE_HW_API uint32_t tiepie_hw_oscilloscope_get_measure_modes ( tiepie_hw_handle  handle)

Get the supported measure modes for a specified oscilloscope.

Parameters
[in]handleA device handle identifying the oscilloscope.
Returns
The supported measure modes, a set of OR-ed TIEPIE_HW_MM_* values.
Status values
TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid oscilloscope handle.
TIEPIE_HW_STATUS_OBJECT_GONE
TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED
TIEPIE_HW_STATUS_SUCCESS
See also
tiepie_hw_oscilloscope_get_measure_mode
tiepie_hw_oscilloscope_set_measure_mode
Since
1.0

◆ tiepie_hw_oscilloscope_get_measure_mode()

TIEPIE_HW_API uint32_t tiepie_hw_oscilloscope_get_measure_mode ( tiepie_hw_handle  handle)

Get the current measure mode.

Parameters
[in]handleA device handle identifying the oscilloscope.
Returns
The currently selected measure mode, a TIEPIE_HW_MM_* value.
Status values
TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid oscilloscope handle.
TIEPIE_HW_STATUS_OBJECT_GONE
TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED
TIEPIE_HW_STATUS_SUCCESS
See also
tiepie_hw_oscilloscope_get_measure_modes
tiepie_hw_oscilloscope_set_measure_mode
Since
1.0

◆ tiepie_hw_oscilloscope_set_measure_mode()

TIEPIE_HW_API uint32_t tiepie_hw_oscilloscope_set_measure_mode ( tiepie_hw_handle  handle,
uint32_t  value 
)

Set the measure mode.

Parameters
[in]handleA device handle identifying the oscilloscope.
[in]valueThe required measure mode, a TIEPIE_HW_MM_* value.
Returns
The actually set measure mode, a TIEPIE_HW_MM_* value.
Remarks
Changing the measure mode may affect the sample rate and/or record length.
Status values
TIEPIE_HW_STATUS_INVALID_VALUE The requested measure mode is invalid.
TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid oscilloscope handle.
TIEPIE_HW_STATUS_OBJECT_GONE
TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED
TIEPIE_HW_STATUS_SUCCESS
See also
tiepie_hw_oscilloscope_get_measure_modes
tiepie_hw_oscilloscope_get_measure_mode
Since
1.0