Functions for controlling burst mode. More...
Collaboration diagram for Burst:
Functions | |
| TIEPIE_HW_API tiepie_hw_bool | tiepie_hw_generator_is_burst_active (tiepie_hw_handle handle) |
| Check whether a burst is active, of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_count_min (tiepie_hw_handle handle) |
| Get the minimum burst count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_count_max (tiepie_hw_handle handle) |
| Get the maximum burst count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_count (tiepie_hw_handle handle) |
| Get the current burst count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_set_burst_count (tiepie_hw_handle handle, uint64_t value) |
| Set the burst count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_sample_count_min (tiepie_hw_handle handle) |
| Get the minimum burst sample count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_sample_count_max (tiepie_hw_handle handle) |
| Get the maximum burst sample count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_sample_count (tiepie_hw_handle handle) |
| Get the current burst sample count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_set_burst_sample_count (tiepie_hw_handle handle, uint64_t value) |
| Set the burst sample count for the current generator mode of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_segment_count_min (tiepie_hw_handle handle) |
| Get the minimum burst segment count for the current settings of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_segment_count_max (tiepie_hw_handle handle) |
| Get the maximum burst segment count for the current settings of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_get_burst_segment_count (tiepie_hw_handle handle) |
| Get the current burst segment count of a specified generator. More... | |
| TIEPIE_HW_API uint64_t | tiepie_hw_generator_set_burst_segment_count (tiepie_hw_handle handle, uint64_t value) |
| Set the burst segment count of a specified generator. More... | |
Detailed Description
Functions for controlling burst mode.
In burst mode, the generator generates a specified number of periods of the selected signal, a specified number of samples from the waveform buffer or a segement from the waveform buffer and then stops automatically.
Starting the generator is done using tiepie_hw_generator_start() and via an external trigger signal on a selected generator trigger input. For all burst modes except TIEPIE_HW_GM_BURST_COUNT a generator trigger input must be enabled.
The following burst modes are supported:
- TIEPIE_HW_GM_BURST_COUNT : When the generator is started, or when an external trigger is enabled and the external signal becomes active, the generator generates a specified number of periods of the selected signal. When the required number of periods is reached, the generator stops automatically and the output will go to the selected Offset. When the burst is started again, the requested amount of periods is generated again.
- TIEPIE_HW_GM_BURST_SAMPLE_COUNT : When the generator is started and the external signal becomes active, the generator generates a specified number of samples from the waveform buffer. When the required number of samples is reached, the generator automatically stops and the output will go to the selected Offset. When the burst is started again, the next requested amount of samples from the waveform buffer are generated.
- TIEPIE_HW_GM_BURST_SAMPLE_COUNT_OUTPUT : When the generator is started and the external signal becomes active, the generator generates a specified number of samples from the waveform buffer. When the required number of samples is reached, the generator automatically stops and the output will remain at the level of the last generated sample. When the burst is started again, the next requested amount of samples from the waveform buffer are generated.
- TIEPIE_HW_GM_BURST_SEGMENT_COUNT : The signal pattern buffer is divided in a specified number of segments. When the generator is started, each time the external signal becomes active, the generator generates the next segment, after which the generator automatically stops and the output will go to the selected Offset. When all sements have been generated, the generator will start on the first segment again, on the next activation of the external signal.
- TIEPIE_HW_GM_BURST_SEGMENT_COUNT_OUTPUT : When the generator is started, each time the external signal becomes active, the generator generates the next segment, after which the generator automatically stops and the output will remain at the level of the last generated sample. When all sements have been generated, the generator will start on the first segment again, on the next activation of the external signal.
By default burst count, burst sample count and burst segment count are set to their minimum values.
Function Documentation
◆ tiepie_hw_generator_is_burst_active()
| TIEPIE_HW_API tiepie_hw_bool tiepie_hw_generator_is_burst_active | ( | tiepie_hw_handle | handle | ) |
Check whether a burst is active, of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- TIEPIE_HW_BOOL_TRUE if a burst is active, TIEPIE_HW_BOOL_FALSE otherwise.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The current generator mode does not support getting the burst status. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- Notification gen_callbacks_burst_completed.
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_count_min()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_count_min | ( | tiepie_hw_handle | handle | ) |
Get the minimum burst count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The minimum burst count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_count_max
- tiepie_hw_generator_get_burst_count
- tiepie_hw_generator_set_burst_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_count_max()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_count_max | ( | tiepie_hw_handle | handle | ) |
Get the maximum burst count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The maximum burst count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_count_min
- tiepie_hw_generator_get_burst_count
- tiepie_hw_generator_set_burst_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_count()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_count | ( | tiepie_hw_handle | handle | ) |
Get the current burst count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The currently set burst count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_count_max
- tiepie_hw_generator_get_burst_count_min
- tiepie_hw_generator_set_burst_count
- Since
- 1.0
◆ tiepie_hw_generator_set_burst_count()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_set_burst_count | ( | tiepie_hw_handle | handle, |
| uint64_t | value | ||
| ) |
Set the burst count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator. [in] value The requested burst count, Gen_get_burst_count_min()toGen_get_burst_count_max().
- Returns
- The actually set burst count.
- Remarks
- The new value becomes active after a call to tiepie_hw_generator_start().
- Status values
TIEPIE_HW_STATUS_VALUE_CLIPPED The requested burst count is outside the valid range and clipped to that range. TIEPIE_HW_STATUS_INVALID_VALUE The requested burst count is invalid. TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_count_max
- tiepie_hw_generator_get_burst_count_min
- tiepie_hw_generator_get_burst_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_sample_count_min()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_sample_count_min | ( | tiepie_hw_handle | handle | ) |
Get the minimum burst sample count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The minimum burst sample count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst sample count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_sample_count_max
- tiepie_hw_generator_get_burst_sample_count
- tiepie_hw_generator_set_burst_sample_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_sample_count_max()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_sample_count_max | ( | tiepie_hw_handle | handle | ) |
Get the maximum burst sample count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The maximum burst sample count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst sample count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_sample_count_min
- tiepie_hw_generator_get_burst_sample_count
- tiepie_hw_generator_set_burst_sample_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_sample_count()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_sample_count | ( | tiepie_hw_handle | handle | ) |
Get the current burst sample count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The currently set burst sample count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst sample count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_sample_count_min
- tiepie_hw_generator_get_burst_sample_count_max
- tiepie_hw_generator_set_burst_sample_count
- Since
- 1.0
◆ tiepie_hw_generator_set_burst_sample_count()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_set_burst_sample_count | ( | tiepie_hw_handle | handle, |
| uint64_t | value | ||
| ) |
Set the burst sample count for the current generator mode of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator. [in] value The requested burst sample count, Gen_getburst_sample_count_min()toGen_getburst_sample_count_max().
- Returns
- The actually set burst sample count.
- Remarks
- The new value becomes active after a call to tiepie_hw_generator_start().
- Status values
TIEPIE_HW_STATUS_VALUE_CLIPPED The requested burst sample count is outside the valid range and clipped to that range. TIEPIE_HW_STATUS_INVALID_VALUE The requested burst sample count is invalid. TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst sample count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_sample_count_min
- tiepie_hw_generator_get_burst_sample_count_max
- tiepie_hw_generator_get_burst_sample_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_segment_count_min()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_segment_count_min | ( | tiepie_hw_handle | handle | ) |
Get the minimum burst segment count for the current settings of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The minimum burst segment count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst segment count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_segment_count_max
- tiepie_hw_generator_get_burst_segment_count
- tiepie_hw_generator_set_burst_segment_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_segment_count_max()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_segment_count_max | ( | tiepie_hw_handle | handle | ) |
Get the maximum burst segment count for the current settings of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The maximum burst segment count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst segment count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_segment_count_min
- tiepie_hw_generator_get_burst_segment_count
- tiepie_hw_generator_set_burst_segment_count
- Since
- 1.0
◆ tiepie_hw_generator_get_burst_segment_count()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_get_burst_segment_count | ( | tiepie_hw_handle | handle | ) |
Get the current burst segment count of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator.
- Returns
- The currently set burst segment count.
- Status values
TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst segment count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_segment_count_min
- tiepie_hw_generator_get_burst_segment_count_max
- tiepie_hw_generator_set_burst_segment_count
- Since
- 1.0
◆ tiepie_hw_generator_set_burst_segment_count()
| TIEPIE_HW_API uint64_t tiepie_hw_generator_set_burst_segment_count | ( | tiepie_hw_handle | handle, |
| uint64_t | value | ||
| ) |
Set the burst segment count of a specified generator.
- Parameters
-
[in] handle A device handle identifying the generator. [in] value The requested burst segment count, tiepie_hw_generator_get_burst_segment_count_min()totiepie_hw_generator_get_burst_segment_count_max().
- Returns
- The actually set burst segment count.
- Status values
TIEPIE_HW_STATUS_VALUE_CLIPPED The requested burst segment count is outside the valid range and clipped to that range. TIEPIE_HW_STATUS_VALUE_MODIFIED The requested burst sample count is inside the valid range but not available. The closest valid value is set. TIEPIE_HW_STATUS_INVALID_VALUE The requested burst segment count is invalid. TIEPIE_HW_STATUS_NOT_SUPPORTED The generator does not support burst segment count in the current generator mode. TIEPIE_HW_STATUS_INVALID_HANDLE The handle is not a valid generator handle. TIEPIE_HW_STATUS_OBJECT_GONE TIEPIE_HW_STATUS_LIBRARY_NOT_INITIALIZED TIEPIE_HW_STATUS_SUCCESS
- See also
- tiepie_hw_generator_get_burst_segment_count_min
- tiepie_hw_generator_get_burst_segment_count_max
- tiepie_hw_generator_get_burst_segment_count
- Since
- 1.0
